• DCEH Series Railway Vehicle Cable
DCEH Series Railway Vehicle Cable
discuss personally
Model
DCEH3-100
Basic info
Brand Wone
Model NO. DCEH Series Railway Vehicle Cable
Rated frequency 50/60Hz
Series DCEH series
Product Detail

Standard

GB12528.4-90 JB8145.3-95

Application

For the transmission of power of railway vehicles. Rated AC voltage 3kV and below.

Property

    a.The rated AC voltage 750V,1.5kV and 3kV.

    b.Permissible contionuous operation temperature of the cable is 100 ,and the lowest temperature of installation is -25 .

    c.The cables can be used in places contaminated by mineral oil and fuel oil.

    d.Permissible radius for the installation of cable bending.

    Overall diameter(D)20mm and below should not be less than 3D.

    Overall diameter(D)20mm amd above should not be less than 5D.

    e.The cable has single flame retardant property. It can pass the flame retardant test stipulated DZ-1 of GB12666 standard.

Type and Description

型号.png

Construction of cable

结构.png

Construction and Dimension

规格.png尺寸1.png

The technical requirement of the cable(wire)meets with the specification of the property and tests of GB12528.1-90 and GB12528.4-90.We canproduce cables of color sheathupon customer’s request.


Q: What is the special cable for rail transit?

A: Thin-wall insulated cable for rail transit vehicles is a cable used for electrical control equipment in locomotive. It adopts tin-plated soft copper conductor and halogen-free low-smoke flame-retardant insulation material, and is produced by thin-wall manufacturing technology. It has the characteristics of small volume, light weight, heat resistance, oil resistance, acid and alkali resistance, cold resistance, wear resistance and ozone resistance. Especially suitable for high-speed and ultra-high-speed rolling stock relatively closed, personnel concentration and other environmental requirements of the rolling stock internal distribution cabinet and power supply system.

Q: What are the characteristics of the cable?

The cable is made of tin-plated soft copper conductor and halogen-free low-smoke flame-retardant insulating material, and is produced by thin-wall manufacturing technology. The product is small in size and light in weight, and has the characteristics of heat resistance, oil resistance, acid and alkali resistance, cold resistance, wear resistance and ozone resistance. It has excellent physical and mechanical properties, convenient installation, safe use and reliable operation. In the case of fire, it can effectively limit the spread of fire and the release of smoke to avoid danger to personnel.


Know your supplier
Wone
Main Categories
High Voltage Electrical Apparatus/Low Voltage Electrical Apparatus/Wire cable/Instrument meters/New energy/Tester/Production equipment/Generator/Electrical fittings/Integrated Electrical Equipment
Business Type
Design/Manufacture/Sales
Highest Annual Export (USD)
$50,000,000
Professional Experience
1 years
Workplace
65666m²m²
占位
占位
Related Products
Related Knowledges
What is the difference between a dielectric and an insulator?
What is the difference between a dielectric and an insulator?
Dielectrics and insulators are distinguished primarily by their applications. One of the main differences is that a dielectric can store electrical energy by becoming polarized in an electric field, whereas an insulator resists the flow of electrons to prevent current conduction. Other key differences between them are outlined in the comparison chart below.Definition of DielectricA dielectric material is a type of insulator that contains few or no free electrons. When subjected to an electric fi
Edwiin
08/30/2025
Fault Analysis and Treatment of Oil-Immersed Transformers
Fault Analysis and Treatment of Oil-Immersed Transformers
Oil Leakage at Welded JointsOil leakage at welded joints primarily stems from poor welding quality, such as incomplete or detached welds, and defects like pinholes and gas pores. Although oil-immersed transformers are initially coated with solder and paint during manufacturing, potentially masking these issues temporarily, the defects tend to surface during operation. Additionally, electromagnetic vibration can cause weld cracks, leading to oil leakage.To resolve such leaks, the first critical s
Edwiin
08/29/2025
What losses occur during operation of the transformer? How to reduce losses?
What losses occur during operation of the transformer? How to reduce losses?
Transformers experience various types of losses during operation, primarily categorized into two main types: copper losses and iron losses.Copper LossesCopper losses, also known as I²R losses, are caused by the electrical resistance of the transformer windings—typically made of copper. As current flows through the windings, energy is dissipated in the form of heat. These losses are proportional to the square of the load current (I²R), meaning they increase significantly with high
Rockwell
08/29/2025
Cable Fault Detection, Testing, Location and Repair
Cable Fault Detection, Testing, Location and Repair
I. Methods for Cable Testing and Inspection:Insulation Resistance Test: Use an insulation resistance tester to measure the insulation resistance value of the cable. A high insulation resistance value indicates good insulation, while a low value may suggest insulation problems requiring further investigation.Voltage Withstand Test: Apply a high-voltage test using a high-voltage tester to verify whether the cable can withstand high voltage under its rated operating conditions. Under normal circums
Leon
08/29/2025
Cable Quality Inspection and Cable Detection & Testing
Cable Quality Inspection and Cable Detection & Testing
Power cable quality inspection and cable testing are conducted to ensure that the cable's quality and performance meet specified requirements, thereby guaranteeing the safe and stable operation of power systems. Below are some common contents of power cable quality inspection and cable testing:Visual Inspection: Check the cable surface for physical defects such as damage, deformation, or scratches to ensure the cable's exterior is intact.Dimensional Measurement: Measure dimensional parameters su
Edwiin
08/29/2025
Transformer Detection, Testing, Maintenance and Servicing
Transformer Detection, Testing, Maintenance and Servicing
Transformer testing, inspection, and maintenance are essential tasks to ensure normal operation and extend the service life of transformers. Below are some recommended steps:Visual Inspection: Regularly inspect the transformer's exterior, including the enclosure, cooling system, and oil tank. Ensure the enclosure is intact, free from corrosion, damage, or leakage.Insulation Resistance Testing: Use an insulation resistance tester to check the transformer's insulation system. Verify that the insul
Vziman
08/29/2025
×
Inquiry
Download
IEE-Business is dedicated to serving the personnel in the global power industry.
Join IEE-Business, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!