| Brand | Switchgear parts |
| Numero ng Modelo | IEC Rear Connector With Surge Arrester |
| Tensyon na Naka-ugali | 24kV |
| Serye | RW-HBLQ |
Buod
Ang IEC Rear connector na may surge arrester ay maaaring magbigay ng maasintasang pangangalaga laban sa sobrang kuryente para sa sistema ng kuryente. Ang panlabas na semi-conductive layers ng screened type IEC Rear connector na may surge arrester upang masiguro ang kaligtasan ng mga operator sa panahon ng pag-install at pag-maintain, at pati na rin ang seguridad ng mga kagamitan. Sa parehong oras, ang kanyang katangian na laban sa ultraviolet, anti-aging, waterproof, at moisture-proof ay nagpapatunay na ang produkto ay ligtas at maasintasang gumagana sa mahigpit na kapaligiran.
Standard packing
Katawan ng surge arrester Pagsusulit na ulat
Silicone grease, towels Bolt stud
Instruction Manual Takip na duster
Conductive rod Certipiko ng pagtugon



Talaan ng teknikal na pamantayan
Item |
Units |
RW-HBLQ-17/45 |
RW-HBLQ-17/50 |
RW-HBLQ-10/27 |
RW-HBLQ-10/30 |
RW-HBLQ-13/36 |
Product model |
- |
RW-HBLQ-17/45 |
RW-HBLQ-17/50 |
RW-HBLQ-10/27 |
RW-HBLQ-10/30 |
RW-HBLQ-13/36 |
Nominal voltage of a system |
kV |
10 |
10 |
6 |
6 |
10 |
Rated voltage of arrester |
kV |
17 |
17 |
10 |
10 |
13 |
Continuous running voltage |
kV |
13.6 |
13.6 |
8 |
8 |
10.4 |
Nominal discharge current In |
kA |
5 |
5 |
5 |
5 |
5 |
Dc 1mA reference voltage |
kV |
≥24 |
≥25 |
≥14.4 |
≥15 |
≥19.3 |
0.75U1mA leakage current |
μA |
≤10 |
≤10 |
≤10 |
≤10 |
≤10 |
Steep current impulse residual voltage |
kV |
≤57.8 |
≤57.5 |
≤31 |
≤34.6 |
≤41.3 |
Lightning impulse residual voltage |
kV |
≤45 |
≤50 |
≤27 |
≤30 |
≤36 |
Operating impulse residual voltage |
kV |
≤35 |
≤42.5 |
≤23 |
≤25.6 |
≤30.7 |
Partial discharge at 15kV |
pC |
≤10 |
≤10 |
≤10 |
≤10 |
≤10 |
2ms square wave impulse current tolerance |
kA |
150 |
150 |
150 |
150 |
150 |
High current shock tolerance |
kA |
65 |
65 |
65 |
65 |
65 |
| Units | RW-HBLQ-26/66 | RW-HBLQ-32/85 | RW-HBLQ-34/85 | RW-HBLQ-34/90 | |
|---|---|---|---|---|---|
| Product model | - | RW-HBLQ-26/66 | RW-HBLQ-32/85 | RW-HBLQ-34/85 | RW-HBLQ-34/90 |
| Nominal voltage of a system | kV | 20 | 20 | 20 | 20 |
| Rated voltage of arrester | kV | 26 | 32 | 34 | 34 |
| Continuous running voltage | kV | 20.8 | 25.6 | 27.2 | 27.2 |
| Nominal discharge current In | kA | 5 | 5 | 5 | 5 |
| Dc 1mA reference voltage | kV | ≥37 | ≥47 | ≥48 | ≥50 |
| 0.75U1mA leakage current | μA | ≤10 | ≤10 | ≤10 | ≤10 |
| Steep slope impact residual voltage | kV | ≤76 | ≤95 | ≤95 | ≤104 |
| Lightning impulse residual voltage | kV | ≤66 | ≤85 | ≤85 | ≤90 |
| Operating impulse residual voltage | kV | ≤56 | ≤75 | ≤75 | ≤80 |
| 25.4kV Partial discharge | pC | ≤10 | ≤10 | ≤10 | ≤10 |
| 2ms square wave impact current tolerance | A | 150 | 150 | 150 | 150 |
| High current shock tolerance | kA | 65 | 65 | 65 | 65 |
| Item | Units | RW-HBLQ-51/134/400 | RW-HBLQ-51/134/600 | RW-HBLQ-51/134/800 |
|---|---|---|---|---|
| Modelong produkto | - | RW-HBLQ-51/134/400 | RW-HBLQ-51/134/600 | RW-HBLQ-51/134/800 |
| Nominal na tensyon ng sistema | kV | 35 | 35 | 35 |
| Rated na tensyon ng arrester | kV | 51 | 51 | 51 |
| Tuloy-tuloy na tensyon sa pag-operate | kV | 40.8 | 40.8 | 40.8 |
| Nominal na discharge current | kA | 5 | 5 | 5 |
| Dc 1mA reference voltage | kV | ≥73 | ≥73 | ≥73 |
| 0.75U1mA leakage current | μA | ≤10 | ≤10 | ≤10 |
| Steep slope impact residual voltage | kV | ≤154 | ≤154 | ≤154 |
| Lightning impulse residual voltage | kV | ≤134 | ≤134 | ≤134 |
| Operating impulse residual voltage | kV | ≤114 | ≤114 | ≤114 |
| Partial discharge at 45kV | pC | ≤10 | ≤10 | ≤10 |
| 2ms square wave impact current tolerance | A | 400 | 600 | 800 |
| High current shock tolerance | kA | 100 | 100 | 100 |
Tandaan: Kapag Pumipili, ipakilala ang halaga ng natitirang boltong impulse.