GRV8-4UVR Three Phase Under Voltage Relay
Key attributes
| Brand | Switchgear parts |
| Model NO. | GRV8-4UVR Three Phase Under Voltage Relay |
| Rated frequency | 45Hz-65Hz |
| Series | GRV8 |
Product descriptions from the supplier
The GRV8-4UVR is a specialized three phase under voltage relay. It‘s compact 36mm width allows for seamless installation in space-constrained control panels, while the adjustable settings provide flexibility to tailor protection to your specific needs. Whether you’re managing a manufacturing plant, HVAC system, or power distribution network, the GRV8-4UVR delivers the precision and reliability you need.
Supply Voltage：AC 220V / 380V / 400V
Measuring Frequency Range：45Hz – 65Hz
Voltage Measurement Accuracy：<1%
Under Voltage Setting Range：Adjustable (e.g., 170V – 210V per phase)*
Trip Delay Time：Adjustable (e.g., 0.1s – 10s)*
Product Highlight:
3-Phase Voltage Monitoring: Unlike single-phase relays, the GRV8-4UVR monitors all three phases simultaneously, ensuring balanced protection for systems where phase integrity is critical.
Adjustable Under Voltage Thresholds: Fine-tune the under voltage protection levels to match the specific requirements of your equipment.
Phase Imbalance and Sequence Protection: Detects and responds to phase imbalances and incorrect phase sequences, preventing motor damage and system failures.
True RMS Measurement: Ensures accurate voltage detection, even in environments with harmonics or non-linear loads.
LED Indicators: Provides clear, real-time status updates for easy monitoring and diagnostics.
Compact Design: The 36mm width and DIN rail mounting make it ideal for space-efficient installations in control panels
| Model | GRV8-4UVR Three Phase Under Voltage Relay |
| Operating temperature | -20℃ to +55℃（-4℉ to 131℉） |
| Storage temperature | -35℃ to +75℃（-22℉ to 158℉） |
| Trip delay time(Tu) | 0.1s |
| Tightening torque | 0.8Nm |
| Electrical life(AC1) | 1*105 |
| Mechanical life | 1*107 |
| Konb setting accuracy | 10% of scale value |
| Current rating | 10A/AC1 |
| Output | 1×SPDT |
| Rated supply voltage(Un) | 220V/230V/240V |
| Switching voltage | 250VAC/24VDC |
| Rated supply frequency | 45Hz-65Hz |
| Hysteresis | 5V |
| Weight | 63g,65g |
| Dimensions | 90×18×64mm |
| Power on delay time(Td) | Adjustable: 5min-15min |
| Recovery delay time(Tr) | Adjustable: 5min-15min |
| Mounting/DIN rail | Din rail EN/IEC 60715 |
| Standards | EN 60255-1,IEC60947-5-1 |
| Overvoltage category | III |
| Protection degree | IP40 for front panel/IP20 terminals |
| Monitoring terminials | L1-L2-L3-N |
| Supply terminals | L1-N |
| Under voltage threshold | R:fixed 75% of Un |
| Function | Under voltage |
| Operating position | any |
| Supply indication | green LED |
| Output indication | red LED |
| Measurement error | ≤1% |
| Pollution degree | 2 |
| Max.cable size(mm²） | solid wire max.1*2.5 or 2*1.5/with sleeve max.1*2.5（AWG 12） |
Online store
On-time delivery rate
Response time
100.0%
≤4h
Company overview
Workplace: 1000m²
Total staff:
Highest Annual Export(usD): 300000000
Services
Business Type: Sales
Main Categories: Low Voltage Electrical Apparatus/Instrument meters/Tester/Production equipment/Electrical fittings/Equipment Parts
Whole life care manager
Whole-life care management services for equipment procurement, use, maintenance, and after-sales, ensuring safe operation of electrical equipment, continuous control, and worry-free electricity consumption.
The equipment supplier has passed platform qualification certification and technical evaluation, ensuring compliance, professionalism, and reliability from the source.
Related Products
-
GRW8-01 02 Temperature Monitoring Relay
-
Digital Timer Switch TS-GE2 Programmable Periodic Timer
-
Digital Timer Switch THC 822 16A Weekly Programmable
-
Digital Timer Switch THC 109-16A Light Dependent Relay ＆accessories
-
Digital Timer Switch THC 109B-16A Light Dependent Relay ＆accessories
-
Digital Timer Switch THC 15A Programmable Periodic Timer
-
Digital Timer Switch THC 20-1C Weekly Programmable
Related Knowledges
-
How to Identify Internal Faults in a Transformer?Measure DC resistance: Use a bridge to measure the DC resistance of each high- and low-voltage winding. Check whether the resistance values among phases are balanced and consistent with the manufacturer’s original data. If phase resistance cannot be measured directly, line resistance may be measured instead. The DC resistance values can indicate whether the windings are intact, whether there are short circuits or open circuits, and whether the contact resistance of the tap changer is normal. IfFelix Spark11/04/2025 -
Front-Panel Visible Wiring Standards for Electrical Control PanelsFront-panel visible wiring: During manual wiring (not using templates or molds), wiring must be straight, neat, closely attached to the mounting surface, rationally routed, and with secure connections that facilitate maintenance. Wiring channels should be minimized as much as possible. Within the same channel, bottom-layer conductors shall be grouped by main and control circuits, arranged in a single-layer parallel dense layout or bundled, and kept closely attached to the mounting surface. ConduJames11/04/2025 -
What are the requirements for inspecting and maintaining a transformer's no-load tap changer?The tap changer operating handle shall be equipped with a protective cover. The flange at the handle shall be well sealed with no oil leakage. Locking screws shall securely fasten both the handle and the drive mechanism, and the handle rotation shall be smooth without binding. The position indicator on the handle shall be clear, accurate, and consistent with the tap voltage regulation range of the winding. Limit stops shall be provided at both extreme positions. The insulating cylinder of the tLeon11/04/2025 -
What Are the Common Inverter Fault Symptoms and Inspection Methods? A Complete GuideCommon inverter faults mainly include overcurrent, short circuit, ground fault, overvoltage, undervoltage, phase loss, overheating, overload, CPU malfunction, and communication errors. Modern inverters are equipped with comprehensive self-diagnostic, protection, and alarm functions. When any of these faults occurs, the inverter will immediately trigger an alarm or shut down automatically for protection, displaying a fault code or fault type. In most cases, the fault cause can be quickly identifiFelix Spark11/04/2025 -
What are the causes of dielectric withstand failure in vacuum circuit breakers?Causes of Dielectric Withstand Failure in Vacuum Circuit Breakers: Surface contamination: The product must be thoroughly cleaned before dielectric withstand testing to remove any dirt or contaminants.Dielectric withstand tests for circuit breakers include both power-frequency withstand voltage and lightning impulse withstand voltage. These tests must be performed separately for phase-to-phase and pole-to-pole (across the vacuum interrupter) configurations.Circuit breakers are recommended to be tFelix Spark11/04/2025 -
What Are the Top 10 Taboos and Precautions in the Installation of Distribution Boards and Cabinets?There are many taboos and problematic practices in the installation of distribution boards and cabinets that must be noted. Especially in certain areas, improper operations during installation may lead to serious consequences. For cases where the precautions were not followed, some corrective measures are also provided here to remedy previous mistakes. Let’s follow along and take a look at common installation taboos from manufacturers regarding distribution boxes and cabinets!1. Taboo: LightingJames11/04/2025
Haven't found the right supplier yet? Let matching verified suppliers find you.
Get Quotation Now
Send inquiry
Download
Get the IEE Business Application
Use the IEE-Business app to find equipment, obtain solutions, connect with experts, and participate in industry collaboration anytime, anywhere—fully supporting the development of your power projects and business.
