GRIS8-02 Isolated Relay
Key attributes
| Brand | Switchgear parts |
| Model NO. | GRIS8-02 Isolated Relay |
| Rated frequency | 45Hz-65Hz |
| Series | GRIS8 |
Product descriptions from the supplier
The GRIS8-02 Isolated Relay by GEYA is a high-performance isolation relay engineered for industrial automation and fire safety systems. With its advanced electrical isolation and versatile control capabilities, it is the go-to solution for HVAC systems, elevator controls, access control doors, and PLC interfaces. Its compact DIN rail mounting design ensures seamless integration into a wide range of control environments.
Voltage range: AC85-265V 45-65Hz
Burden: 3VA
Output: 2×SPDT
Switching voltage: 250VAC/24VDC
Current rating: 10A/AC1
Product Highlight:
Dual-Direction Isolation: Provides comprehensive isolation between input and output, minimizing the risk of system failures.
Superior Interference Resistance: Maintains stable operation even in high electromagnetic interference environments, ensuring system reliability.
Multi-Load Compatibility: Supports parallel control of multiple devices, meeting the demands of complex applications.
Millisecond Response Time: Delivers rapid switching for precise, real-time control.
Wide Temperature Adaptability: Operates flawlessly in extreme conditions, from -25°C to +70°C.
Intuitive Status Indicator: Built-in LED indicator for easy monitoring of relay status
| Model | GRIS8-02 |
| Function | Interface/ Control Relay |
| Supply terminals | A1-A2 |
| Voltage range | AC85-265V 45-65Hz |
| Burden | 3VA |
| Supply indication | green LED |
| Isolation voltage | |
| Supply I/P to I/P Switch | 4VAC |
| Supply I/P to O/P Switch | 4VAC |
| I/P Switch to Relay O/P | 4VAC |
| Output | 2 x SPDT |
| Current rating | 10A/AC1 |
| Switching voltage | 250VAC/24VDC |
| Min.breaking capacity DC | 500mW |
| Output indication | red LED |
| Mechanical life | 1*107 |
| Electrical life(AC1) | 1*105 |
| Operating temperature | -20℃~+55℃ |
| Storage temperature | -35℃~+75℃ |
| Mounting/DIN rail | Din rail EN/IEC 60715 |
| Protection degree | IP20 |
| Operating position | any |
| Overvoltage cathegory | III |
| Pollution degree | 2 |
| Max.cable size（mm²） | 1*25mm² or 2*1.5mm² 0.4N.m |
| Dimensions | 90mm×18mm×64mm |
| Weight | 120g |
| Standards | GB/T14048.5,IEC60947-5-1 |
Online store
On-time delivery rate
Response time
100.0%
≤4h
Company overview
Workplace: 1000m²
Total staff:
Highest Annual Export(usD): 300000000
Services
Business Type: Sales
Main Categories: Low Voltage Electrical Apparatus/Instrument meters/Tester/Production equipment/Electrical fittings/Equipment Parts
Whole life care manager
Whole-life care management services for equipment procurement, use, maintenance, and after-sales, ensuring safe operation of electrical equipment, continuous control, and worry-free electricity consumption.
The equipment supplier has passed platform qualification certification and technical evaluation, ensuring compliance, professionalism, and reliability from the source.
Related Products
-
GRW8-01 02 Temperature Monitoring Relay
-
Digital Timer Switch TS-GE2 Programmable Periodic Timer
-
Digital Timer Switch THC 822 16A Weekly Programmable
-
Digital Timer Switch THC 109-16A Light Dependent Relay ＆accessories
-
Digital Timer Switch THC 109B-16A Light Dependent Relay ＆accessories
-
Digital Timer Switch THC 15A Programmable Periodic Timer
-
Digital Timer Switch THC 20-1C Weekly Programmable
Related Knowledges
-
How to Identify Internal Faults in a Transformer?Measure DC resistance: Use a bridge to measure the DC resistance of each high- and low-voltage winding. Check whether the resistance values among phases are balanced and consistent with the manufacturer’s original data. If phase resistance cannot be measured directly, line resistance may be measured instead. The DC resistance values can indicate whether the windings are intact, whether there are short circuits or open circuits, and whether the contact resistance of the tap changer is normal. IfFelix Spark11/04/2025 -
Front-Panel Visible Wiring Standards for Electrical Control PanelsFront-panel visible wiring: During manual wiring (not using templates or molds), wiring must be straight, neat, closely attached to the mounting surface, rationally routed, and with secure connections that facilitate maintenance. Wiring channels should be minimized as much as possible. Within the same channel, bottom-layer conductors shall be grouped by main and control circuits, arranged in a single-layer parallel dense layout or bundled, and kept closely attached to the mounting surface. ConduJames11/04/2025 -
What are the requirements for inspecting and maintaining a transformer's no-load tap changer?The tap changer operating handle shall be equipped with a protective cover. The flange at the handle shall be well sealed with no oil leakage. Locking screws shall securely fasten both the handle and the drive mechanism, and the handle rotation shall be smooth without binding. The position indicator on the handle shall be clear, accurate, and consistent with the tap voltage regulation range of the winding. Limit stops shall be provided at both extreme positions. The insulating cylinder of the tLeon11/04/2025 -
What Are the Common Inverter Fault Symptoms and Inspection Methods? A Complete GuideCommon inverter faults mainly include overcurrent, short circuit, ground fault, overvoltage, undervoltage, phase loss, overheating, overload, CPU malfunction, and communication errors. Modern inverters are equipped with comprehensive self-diagnostic, protection, and alarm functions. When any of these faults occurs, the inverter will immediately trigger an alarm or shut down automatically for protection, displaying a fault code or fault type. In most cases, the fault cause can be quickly identifiFelix Spark11/04/2025 -
What are the causes of dielectric withstand failure in vacuum circuit breakers?Causes of Dielectric Withstand Failure in Vacuum Circuit Breakers: Surface contamination: The product must be thoroughly cleaned before dielectric withstand testing to remove any dirt or contaminants.Dielectric withstand tests for circuit breakers include both power-frequency withstand voltage and lightning impulse withstand voltage. These tests must be performed separately for phase-to-phase and pole-to-pole (across the vacuum interrupter) configurations.Circuit breakers are recommended to be tFelix Spark11/04/2025 -
What Are the Top 10 Taboos and Precautions in the Installation of Distribution Boards and Cabinets?There are many taboos and problematic practices in the installation of distribution boards and cabinets that must be noted. Especially in certain areas, improper operations during installation may lead to serious consequences. For cases where the precautions were not followed, some corrective measures are also provided here to remedy previous mistakes. Let’s follow along and take a look at common installation taboos from manufacturers regarding distribution boxes and cabinets!1. Taboo: LightingJames11/04/2025
Haven't found the right supplier yet? Let matching verified suppliers find you.
Get Quotation Now
Send inquiry
Download
Get the IEE Business Application
Use the IEE-Business app to find equipment, obtain solutions, connect with experts, and participate in industry collaboration anytime, anywhere—fully supporting the development of your power projects and business.
