MiniBreak™ Compact Height Switches— 5.5 kV, 200 A - IEE-Business

English
RFQ

Download the app

MiniBreak™ Compact Height Switches— 5.5 kV, 200 A

discuss personally

Model

MiniBreak™-5.5

Basic info Product Detail Supplier

Basic info

Brand	Schneider
Model NO.	MiniBreak™ Compact Height Switches— 5.5 kV, 200 A
Rated frequency	60hz
Series	MiniBreak™

Product Detail

General

The Square D™ brand MiniBreak compact height switch enclosure is only 66-inches high and contains a single 3-pole load interrupter switch, rated 5.5 kV and 200 A. Enclosures are free-standing and suitable for both indoor (NEMA 1) and outdoor (NEMA 3R) applications. These switches are available unfused or with provisions for ANSI-style, 3-inch-barrel fuses rated from 10E A to 200E A. Factory-installed accessories include an auxiliary switch, strip heaters, and provisions for a “lock open” only key interlock. The door is mechanically interlocked with the switch operating handle. Set screw cable lugs for #14 solid—2/0 stranded aluminum or copper cable are provided for two line and one load connections. Fuses are not furnished with this equipment. For fuse information, see Current-Limiting Fuses, Non-Disconnect Type Current-Limiting Fuses, Non-Disconnect Type. The Fused switches and many of the fuses listed in this table are available from stock.

Ratings

Know your supplier

Schneider

Chengdu Fabo Automation Complete Equipment Co., Ltd is an authorized distributor of Schneider Electric, a global leader in energy management and automation solutions.

Main Categories

High Voltage Electrical Apparatus/Low Voltage Electrical Apparatus

Business Type

Manufacture/Sales

Highest Annual Export (USD)

$400000000

Professional Experience

10 years

Workplace

20000m²

占位

占位

Related Products

Related Knowledges

What is the difference between a dielectric and an insulator?

What is the difference between a dielectric and an insulator?

Dielectrics and insulators are distinguished primarily by their applications. One of the main differences is that a dielectric can store electrical energy by becoming polarized in an electric field, whereas an insulator resists the flow of electrons to prevent current conduction. Other key differences between them are outlined in the comparison chart below.Definition of DielectricA dielectric material is a type of insulator that contains few or no free electrons. When subjected to an electric fi

Fault Analysis and Treatment of Oil-Immersed Transformers

Fault Analysis and Treatment of Oil-Immersed Transformers

Oil Leakage at Welded JointsOil leakage at welded joints primarily stems from poor welding quality, such as incomplete or detached welds, and defects like pinholes and gas pores. Although oil-immersed transformers are initially coated with solder and paint during manufacturing, potentially masking these issues temporarily, the defects tend to surface during operation. Additionally, electromagnetic vibration can cause weld cracks, leading to oil leakage.To resolve such leaks, the first critical s

What losses occur during operation of the transformer? How to reduce losses?

What losses occur during operation of the transformer? How to reduce losses?

Transformers experience various types of losses during operation, primarily categorized into two main types: copper losses and iron losses.Copper LossesCopper losses, also known as I²R losses, are caused by the electrical resistance of the transformer windings—typically made of copper. As current flows through the windings, energy is dissipated in the form of heat. These losses are proportional to the square of the load current (I²R), meaning they increase significantly with high

Cable Fault Detection, Testing, Location and Repair

Cable Fault Detection, Testing, Location and Repair

I. Methods for Cable Testing and Inspection:Insulation Resistance Test: Use an insulation resistance tester to measure the insulation resistance value of the cable. A high insulation resistance value indicates good insulation, while a low value may suggest insulation problems requiring further investigation.Voltage Withstand Test: Apply a high-voltage test using a high-voltage tester to verify whether the cable can withstand high voltage under its rated operating conditions. Under normal circums

Cable Quality Inspection and Cable Detection & Testing

Cable Quality Inspection and Cable Detection & Testing

Power cable quality inspection and cable testing are conducted to ensure that the cable's quality and performance meet specified requirements, thereby guaranteeing the safe and stable operation of power systems. Below are some common contents of power cable quality inspection and cable testing:Visual Inspection: Check the cable surface for physical defects such as damage, deformation, or scratches to ensure the cable's exterior is intact.Dimensional Measurement: Measure dimensional parameters su

Transformer Detection, Testing, Maintenance and Servicing

Transformer Detection, Testing, Maintenance and Servicing

Transformer testing, inspection, and maintenance are essential tasks to ensure normal operation and extend the service life of transformers. Below are some recommended steps:Visual Inspection: Regularly inspect the transformer's exterior, including the enclosure, cooling system, and oil tank. Ensure the enclosure is intact, free from corrosion, damage, or leakage.Insulation Resistance Testing: Use an insulation resistance tester to check the transformer's insulation system. Verify that the insul