6kV~10kV Customized High Voltage Shunt Capacitor Bank (注：此为原文，因 Cebuano 语中没有直接对应的电力科技术语，故保留英文以确保准确性和专业性) Pasi-un nga Banko sa Kapasitor sa Mataas nga Voltaje nga Gipersonalize alang sa 6kV~10kV

Pangkalahatan

Ang 10kV assembled shunt capacitor device ginagamit sa AC power system ng 10kV at ibaba, sa mga lugar na may limitadong espasyo o mataas na pangangailangan sa lindol, para sa reactive power compensation sa industriyal na frequency power systems.

Pangunahing Katangian

• Ang paggamit ng bagong uri ng integrated capacitor internal unit, ang kalidad ay ligtas at matatag.

•  Ang maliit na yunit ay may panloob na fuse upang mapataas ang seguridad at reliabilidad ng operasyon ng kolektibong capacitor.

•  Ang produkto ay may kompakto na istraktura at maliit na footprint.

• Ang imprastruktura ay simple at ang dami ng on-site installation ay maliit.

• May kaunting exposed conductors, at ang dami ng maintenance ay maliit.

Technical data

• Rated frequency: 50Hz

• Rated voltage: 6kV, 10kV

• Rated capacity: 800~10000kvar

• Number of phases: three-phase or single-phase

• Loss tangent value: tanδ is not more than 0.0005

• Capacitance deviation: The deviation between the measured capacitance and its rated value shall not exceed 0~+5%, and the ratio of the maximum value to the minimum value between any two line terminals of the three-phase capacitor shall not exceed 1.02.

• The capacitor can operate continuously at 1.1 times the rated voltage.

• The capacitor can operate continuously when the overcurrent does not exceed 1.3 times of its rated current.

• Climbing distance of outlet casing: ≥35mm/kV

• Contamination level of casing: level d

Working Conditions

• Altitude: ≤1000m. In plateau areas over 1000m, the prototype integrated shunt capacitors provided by our company can be used.

• Ambient temperature category: -40/B.

• Pollution level: Level IV.

• Installation location: outdoor. It can also be used indoors or in areas that require a small area

• Ambient environment: no severely corrosive gases and vapors to metals, no conductive or explosive dust, and no severe mechanical vibration.

• When the capacitor is put into operation, the residual voltage on its terminals should not exceed 10% of the rated voltage.