| Brand | Wone Store |
| Numero sa Modelo | 30kW Micro Francis Turbine Generator |
| Naka nga boltahang rated | 400V |
| bilang ng phase | Three-phase |
| Naka nga gipasabot nga kapangyarihan sa pag-utok | 50KW |
| Serye | SFW50 |
Ang Francis turbine ay applicable sa middle at low water head at middle at small flow ng hydropower station. Ang micro hydropower project ay karaniwang gumagamit ng vertical type Francis turbine generator system. Ang turbine ay pangunahing binubuo ng spiral case (water diversion chamber), turbine runner o wheel, water guide vane (wicket gates), draft tube, etc.
Ang Francis turbine ay isang uri ng turbine na suitable sa water head 20-300meters at may tiyak na suitable flow.
Maaari itong ma-subdivide sa vertical at horizontal arrangement. Ang Francis turbine ay may advantage ng mataas na efficiency, maliit na laki at reliable structure.
Ang horizontal Francis turbine unit, na may horizontal shaft, maaaring magkaroon ng 2 o three supports. Karaniwan ito ay one stair arrangement. Simple structure, mas madaling operation at maintainence.
50KW Francis Turbine Engineering Case
Ang Francis Turbine na in-order ng isang French customer ay na-produce na.
In-order ang equipment noong dulo ng 2018, dahil ang engineering company ng customer ay magkakaroon pa ng iba pang mas powerful na hydropower projects sa hinaharap, kaya naman nagpunta sila ng mag-asawa sa China upang bisitahin ang aming factory, at ibigay sa amin ang feedback tungkol sa upcoming delivery.
Ang aming engineers ay nag-design ng Francis hydroelectric generating set para sa customer nang uniquely batay sa head at flow data ng customer
Product Advantages
Komprehensibong processing capacity. T tulad ng 5M CNC VTL OPERATOR, 130 & 150 CNC floor boring machines, constant temperature annealing furnace, planer milling machine, CNC machining center ect.
Ang designed lifespan ay higit sa 40 years.
Ang Forster ay nagbibigay ng one time free site service, kung ang customer ay bumili ng tatlong units (capacity ≤100kw) sa loob ng isang taon, o ang total amount ay higit sa 5 units. Kasama sa site service ang equipments inspection, new site checking, installation at maintainance training ect,.
Nag-accept ng OEM.
CNC machining , dynamic balance tested at isothermal annealing processed,NDT test.
Design at R&D Capabilities, 13 senior engineers na may karanasan sa design at research.
Specifications
| Rated Head | 20(meters) |
| Rated Flow | 0.5m3/s |
| Efficiency | 85(%) |
| Pipe Diameter | 200(mm) |
| Output | 30(kW) |
| Voltage | 400(V) |
| Current | 75(A) |
| Frequency | 50(Hz) |
| Rotary Speed | 1500(RPM) |
| Phase | Three(Phase) |
| Altitude | ≤3000(meters) |
| Protection Grade | IP44 |
| Temperature | -25~+50℃ |
| Relative Humidity | ≤90% |
| Safety Protection | Short circuit Protection |
| Insulation Protection | |
| Over Load Protection | |
| Grounding Fault Protection | |
| Packing Material | Woodenbox |