| Brand | Wone Store |
| Numero sa Modelo | 1KW Wind&solar Hybrid Controller 1KW Kontrolador sa Hugpong ng Hangin & Solar |
| Parehas nga Input Voltage | DC48V |
| kuryente | 1kW |
| Serye | WWS-10 |
Ang kontrolador ng hybrid wind/solar ay isang kontrol na aparato na maaaring kontrolin ang wind turbine at solar panel sa parehong oras at maitransform ang enerhiya ng hangin at araw sa kuryente at ito ay imumulan sa battery bank. Ang kontrolador ng hybrid wind/solar ang pinakamahalagang bahagi sa off-grid system, kung saan may malaking epekto sa life expectancy at operasyon ng buong sistema, lalo na ang inaasahan ng bateria. Ang life span ng bateria ay maikli dahil sa over charge o over discharge sa anumang kaso.
Pangunahing Katangian
Maaaring gamitin sa hybrid wind&solar off-grid system
Maraming mga function na optional, tulad ng wind speed measure function, rotational speed control function at temperature compensation function.
RS232/RS485/RJ45/GPRS/Bluetooth/Zigbee optional. ( Maaaring monitorin gamit ang app para sa mga may GPRS/WIFI/Bluetooth connection)
Paggamit
Independent na power plant ng hangin
Independent na household wind power generation system
Power supply para sa mga unmanned regions tulad ng mobile communication station, high way, coastal islands, remote mountainous regions at border posts.
Regional research projects, government demonstration projects, landscape lighting projects para sa mga lugar na may insufficient power o power shortages.
Teknikal na Parametro
Modelo |
WWS10-24 |
WWS10-48 |
Input ng Wind Turbine |
||
Rated input power |
1kW |
|
Rated input voltage |
24VDC |
48VDC |
Input voltage range |
0~32VDC |
0~64VDC |
Rated input current |
42A |
21A |
Brake by hand |
Keep press the button for 5s to unload completely, and then recover by hand. |
|
Switch "ON" the brake switch |
||
Brake by over current |
42A (factory default, 0~42A settable) unload completely when reached the set current, and recover automatically after working 10mins. |
21A (factory default, 0~21A settable) unload completely when reached the set current, and recover automatically after working 10mins. |
Brake by overvoltage |
Refer to "output overvoltage" control |
|
Brake by over wind speed (optional) |
18m/s (0-30m/s settable), unload completely when reached the set wind speed, and recover automatically after working 10mins. |
|
Brake by over rotational Speed (optional) |
500r/min (factory default,0~1000r/min settable)Unload completely when reached the set rotational speed, and recover automatically after working 10mins. |
|
Input ng PV |
||
Rated input power |
300W |
|
Max. Open circuit voltage |
48VDC |
96VDC |
Rated input current |
13A |
7A |
Reversed connection protection |
YES |
YES |
Charge Parameters |
||
Rated battery voltage |
24VDC |
48VDC |
Temperature compensation function (optional) |
-3mV/℃/2V |
|
Output Parameters |
||
Rated output voltage |
24VDC |
48VDC |
Output overvoltage point |
29VDC |
58VDC |
output overvoltage recovery point |
it will recover automatically once it is lower than output overvoltage point. |
|
Max. Output current |
42A |
21A |
General Parameters |
||
Rectifier mode |
Uncontrolled rectifier |
|
Display mode |
LCD |
|
Display information |
DC output voltage, wind voltage/current/power, battery voltage, PV voltage/current/power. |
|
Monitoring mode (optional) |
RS232/RS485/RJ45/GPRS/Bluetooth/Zigbee |
|
Monitoring Contents |
DC output voltage, wind voltage/current/power, battery voltage, PV voltage/current/power. |
|
parameter setting: output overvoltage point, wind overcurrent point and manual brake |
||
Lightning protection |
YES |
|
Conversion efficiency |
＜95% |
|
Static loss |
＜2W |
＜1W |
Ambient temperature |
-20℃～+40℃ |
|
Humidity |
0~90%, No condensing |
|
Noise |
≤65dB |
|
Cooling mode |
Natural cooling |
|
Installation mode |
Wall-mounted |
|
Cover protection class |
IP20 |
|
Product dimension (W*H*D) |
420x400x175 mm |
|
Product net weight |
10kG |
|
