| Brand | Switchgear parts |
| Numero ng Modelo | 1000-1600A Serye ng DNH40 ng Switch na Tagatanggal |
| Tensyon na Naka-ugali | AC 1000V |
| Rated Current | 1600A |
| Larawan na Pagsasahimpapawid | 50Hz |
| Serye | DNH40 |
Ang serye DNH40 ay may modular structure na maaaring maasemble batay sa mga pangangailangan ng customer.
Ang housing ng switch ay gawa sa glass fiber-reinforced unsaturated polyester resin, nagbibigay ng excellent na flame-retardant properties, dielectric performance, anti-carbonization, at impact resistance.
Naka-equipped ng double spring energy storage mechanism, ang switch ay nagbibigay ng instantaneous release ng spring sa panahon ng operasyon, nagse-ensure ng mabilis na koneksyon at disconnection. Ang mekanismo na ito ay independent sa bilis ng operating handle, nagsasagawa ng significant na pag-improve sa switching capabilities.
Ang posisyon ng moving contact ay visible sa pamamagitan ng isang window, nagbibigay ng mas mataas na antas ng seguridad.
Ang switch ay may clear ON/OFF indicator. Kapag nasa “O” position, ang handle ay maaaring ilock upang maiwasan ang accidental operation.
1、Machinery and Equipment
Angkop para sa machinery na nangangailangan ng infrequent na koneksyon at disconnection ng circuits. Ang reliable isolation ay nagse-ensure ng seguridad sa panahon ng maintenance at operasyon.
2、Distribution Systems
Ginagamit sa electrical distribution systems upang i-isolate ang iba't ibang bahagi para sa maintenance o sa kaso ng fault. Nagse-ensure ng seguridad ng mga tao at equipment.
3、Switchgear and Control Panels
Integral sa switchgear at control panels para sa ligtas na isolation ng circuits. Nagse-ensure na ang mga operator ay maaaring gumawa ng ligtas sa electrical panels nang walang panganib ng electric shock.
4、Motor Control Centers
Nagbibigay ng isolation para sa motor control circuits, nagse-allow ng ligtas na maintenance at operasyon. Essential sa industrial environments kung saan ang motor control ay critical.
5、Photovoltaic Systems
Ginagamit sa photovoltaic systems upang i-isolate ang mga bahagi ng system para sa maintenance, nagse-ensure ng seguridad at reliability sa renewable energy setups.
| Model | DNH40 - 1000 | DNH40 - 1250 | DNH40 - 1600 | |
| Conventional thermal current and rated operational current | A | 1000 | 1250 | 1600 |
| Rated operational voltage (AC - 20/DC - 20) | V | 1000 | 1000 | 1000 |
| Rated insulation voltage (Installation category Ⅳ) | Ui V | 1000 | 1000 | 1000 |
| Dielectric strength | 50Hz 1min kV | 10 | 10 | 10 |
| Rated impulse withstand voltage | Uimp kV | 12 | 12 | 12 |
| Rated operational current (AC - 21A) | 690V A | 1000 | 1250 | 1600 |
| Rated operational current (AC - 22A) | 690V A | 1000 | 1250 | 1600 |
| Rated operational current (AC - 23A) | 690V A | 1000 | 1250 | 1250 |
| Power loss per pole (at rated operational current) | W | 19 | 29 | 48 |
| Rated short - time withstand current | ≤690V1s kA | 50 | 50 | 48 |
Normal Operating Conditions
| Ambient Temperature | Range: -5°C to +40°C, with a 24-hour average temperature not exceeding +35°C |
| Humidity | At maximum temperature (+40°C), relative humidity ≤ 50%. At lower temperatures (e.g., +20°C), higher humidity (up to 90%) is permissible. Special measures must be taken to address occasional condensation caused by temperature fluctuations. |
| Altitude | ≤2000m |
| Pollution Degree | III |
| Installation Category | IV |
| Installation Requirements | Ang switch ay dapat na i-install sa lugar na walang malaking vibration, mechanical shock, o exposure sa ulan/snow. Ang installation site ay dapat na walang explosive hazardous substances at corrosive gases/dust na maaaring sirain ang metal o insulation. |
| Note | Kung ang switch ay intended para sa use sa ambient temperatures na lumampas sa +40°C o below -5°C, ang user ay dapat mag-consult sa manufacturer. |

