What is the Tertiary Winding of Transformer?

Encyclopedia
08/08/2024

What is the Tertiary Winding of Transformer?

Tertiary Winding Definition

The tertiary winding in a transformer is an additional winding besides the primary and secondary windings, creating a three-winding transformer.

4c5c8603-8b93-41fe-be6f-a6a9f6da8626.jpg


Delta Connection

The tertiary winding’s delta connection helps limit fault current during short circuits.

2f8637a2-47f4-4e6d-bc99-78cd7d3da6d0.jpg

Stabilization Role

In star-star transformers, the tertiary winding stabilizes the system by allowing the circulation of zero-sequence currents.

Rating and Design

The design of the tertiary winding depends on its use, requiring considerations for load capacity or short-duration fault currents.

Advantages of Tertiary Winding

  • It reduces the unbalancing in the primary due to unbalancing in three phase load.

  • It redistributes the flow of fault current.

  • Sometime it is required to supply an auxiliary load in different voltage level in addition to its main secondary load. This secondary load can be taken from tertiary winding of three winding transformer.

  • As the tertiary winding is connected in delta formation in 3 winding transformer, it assists in limitation of fault current in the event of a short circuit from line to neutral.

Encyclopedia

The Electricity Encyclopedia is dedicated to accelerating the dissemination and application of electricity knowledge and adding impetus to the development and innovation of the electricity industry.

Analysis of Transformer Capacity, Load Rate and Number of Units Selection Issues
Analysis of Transformer Capacity, Load Rate and Number of Units Selection Issues
The safe and economical operation of power transformers is related to the safety, economy, stability, and reliability of the operations of various industries. The limitations of conditions such as the investment economic indicators for its selection, the economic benefits of maintenance and operation, and the adaptability in the new environment (access of distributed power sources, configuration of energy storage, etc.) make it impossible to include comprehensive factors in other aspects.The cap
Leon
07/17/2025
What are the application advantages and development trends of pad-mounted transformers?
What are the application advantages and development trends of pad-mounted transformers?
In the reconstruction and expansion of modern urban power grids, to optimize the power supply layout, it is required that high - voltage directly enters urban areas, medium - voltage penetrates deep into load centers to shorten the low - voltage power supply radius, and underground cable laying is mostly adopted for urban main roads. Electrical equipment needs to meet the requirements of intelligence, miniaturization, high reliability and aesthetics. The compact substation is widely used in urba
Echo
06/17/2025
Thermal Optimization Design for Control Cabinets of Pad-Mounted Transformers in Offshore Wind Turbines
Thermal Optimization Design for Control Cabinets of Pad-Mounted Transformers in Offshore Wind Turbines
Global energy transition boosts offshore wind power, yet complex marine environments challenge turbine reliability. The heat - dissipation of pad - mounted transformer control cabinets (PMTCCs) is critical—undissipated heat causes component damage. Optimizing PMTCC heat dissipation improves turbine efficiency, but research mostly focuses on onshore wind farms, neglecting offshore ones. Thus, design PMTCCs for offshore conditions to enhance safety.1 PMTCC Heat - Dissipation Optimization1.1
Dyson
06/17/2025
Application of Pad-Mounted Transformers in Distribution Systems
Application of Pad-Mounted Transformers in Distribution Systems
I. Design Principles of Pad-mounted TransformersWith the upgrading of power infrastructure, pad-mounted transformers are widely used in various scenarios due to their light weight, small size, low loss, low noise and high reliability. Studies show that when the power supply voltage is increased from 380V to 10kV, line loss is reduced by 60%, and copper consumption and investment are each reduced by 52%, with remarkable economic and social benefits. As a product of modern economic and social deve
Echo
06/17/2025
Inquiry
Download
IEE-Business is dedicated to serving the personnel in the global power industry.
Join IEE-Business, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!