H Parameters (Hybrid Parameters) in Two Port Networks

Learn about H Parameters (Hybrid Parameters): their definition, matrix form, and how they model two-port networks like transistors, unlike Z or Y parameters.

Electrical4u
Field: Generation
Electrical Engineer
10Year<
China
Add us on Google

What are H Parameters (Hybrid Parameters?)

Hybrid parameters (also known as h parameters) are known as ‘hybrid’ parameters as they use Z parameters, Y parameters, voltage ratio, and current ratios to represent the relationship between voltage and current in a two port network. H parameters are useful in describing the input-output characteristics of circuits where it is hard to measure Z or Y parameters (such as in a transistor).

H parameters encapsulate all the important linear characteristics of the circuit, so they are very useful for simulation purposes. The relationship between voltages and current in h parameters can be represented as:



H Parameters (Hybrid Parameters) in Two Port Networks



This can be represented in matrix form as:



H Parameters (Hybrid Parameters) in Two Port Networks



To illustrate where h parameters are useful, take the case of an ideal transformer, where Z parameters cannot be used. Since here, the relations between voltages and current in that ideal transformer would be,



H Parameters (Hybrid Parameters) in Two Port Networks





relation of voltage and current



Since an ideal transformer’s voltage can not be expressed in terms of current, it is impossible to analyze a transformer with Z parameters because a transformer does not have Z parameters. The problem can instead be solved by using hybrid parameters (i.e. h parameters).

How to Find H Parameters in Two Port Networks

Let us short circuit the output port of a two port network as shown below,



two port network



Now, ratio of input voltage to input current, at short circuited output port is:



H Parameters (Hybrid Parameters) in Two Port Networks



This is referred to as the short circuit input impedance. Now, the ratio of the output current to input current at the short-circuited output port is:



H Parameters (Hybrid Parameters) in Two Port Networks



This is called short-circuit current gain of the network. Now, let us open circuit the port 1. At that condition, there will be no input current (I1=0) but open circuit voltage V1 appears across the port 1, as shown below:



open circuit reverse voltage gain



Now:



H Parameters (Hybrid Parameters) in Two Port Networks



This is referred as reverse voltage gain because, this is the ratio of input voltage to the output voltage of the network, but voltage gain is defined as the ratio of output voltage to the input voltage of a network.

Now:



H Parameters (Hybrid Parameters) in Two Port Networks



It is referred as open circuit output admittance.

h Parameter Equivalent Network of Two Port Network

To draw h parameter equivalent network of a two port network, first we have to write the equation of voltages and currents using h parameters. These are:



H Parameters (Hybrid Parameters) in Two Port Networks



Equation (i) can be represented as a circuit based on Kirchhoff Voltage Law:



kirchhoff Voltage Law



Equation (ii) can be represented as a circuit based on Kirchhoff Current Law:



Kirchhoff current law



Combining these two parts of the network we get:



combing two parts of the network



Inverse Hybrid Parameters or g Parameters

There is another set of parameters which is closely related to the h parameters. These parameters are called inverse hybrid parameters or g parameters. The relations between currents and voltages with g parameters are represented as:



H Parameters (Hybrid Parameters) in Two Port Networks



In matrix form:



H Parameters (Hybrid Parameters) in Two Port Networks



where:



H Parameters (Hybrid Parameters) in Two Port Networks



g Parameter Equivalent Network of Two Port Network

g parameters can be obtained in a similar way to h parameters. The equivalent circuit of two port network using g parameter can be constructed.

The relations between currents and voltages in g parameter are:



H Parameters (Hybrid Parameters) in Two Port Networks



As per equation (iii), we can show:



g parameter equivalent network



As per equation (iv) we can show:



g parameter circuit



Combining these two circuits, we get,



H Parameters (Hybrid Parameters) in Two Port Networks



The h parameters are used to analyzing Bipolar Junction Transistor or BJT. Whereas, g parameter are used to analyzing Junction Field Effect Transistor or JFET.

Source: Electrical4u.

Statement: Respect the original, good articles worth sharing, if there is infringement please contact delete.


Give a tip and encourage the author!
Related Products

Comments

Share your question or perspective
WhatsApp
Send inquiry
+86
Click to upload file
Download
Get the IEE Business Application
Use the IEE-Business app to find equipment, obtain solutions, connect with experts, and participate in industry collaboration anytime, anywhere—fully supporting the development of your power projects and business.
Login
or continue with
New here?
Register