• Product
  • Suppliers
  • Manufacturers
  • Solutions
  • Free tools
  • Knowledges
  • Experts
  • Communities
Search


What is Synchronous Condenser?

Encyclopedia
Encyclopedia
Field: Encyclopedia
0
China


What is What is Synchronous Condenser?


Synchronous Condenser Definition


A synchronous condenser is defined as a synchronous motor running without a mechanical load, used to improve the power factor of power systems.


Improving Power Factor


Suppose due to a reactive load of the power system the system draws a current Ithree phase synchronous motorL from the source at a lagging angle θL in respect of voltage. Now the motor draws a IM from the same source at a leading angle θM.


b4368f5891aa5ce7b6a0946fbb4c5aff.jpeg

Now the total current drawn from the source is the vector sum of the load current IL and motor current IM. The resultant current I drawn from the source has an angle θ in respect of voltage. The angle θ is less than angle θL. Hence power factor of the system cosθ is now more than the power factor cosθL of the system before we connect the synchronous condenser to the system.


A synchronous condenser is a more advanced technique for improving power factor than a static capacitor bank. However, for systems below 500 kVAR, it is not as economical as a capacitor bank. For major power networks, we use synchronous condensers, but for lower-rated systems, we usually employ capacitor bank.


One advantage of a synchronous condenser is that it allows smooth, continuous control of the power factor. In contrast, a static capacitor bank can only improve the power factor in steps, not allowing fine adjustments.The short circuit withstand-limit of the armature winding of a synchronous motor is high.


Although, synchronous condenser system has some disadvantages. The system is not silent since the synchronous motor has to rotate continuously.

An ideal load less synchronous motor draws leading current at 90o(electrical).

 

Give a tip and encourage the author!
Recommended
Three-Phase SPD: Types, Wiring & Maintenance Guide
Three-Phase SPD: Types, Wiring & Maintenance Guide
1. What Is a Three-Phase Power Surge Protective Device (SPD)?A three-phase power surge protective device (SPD), also known as a three-phase lightning arrester, is specifically designed for three-phase AC power systems. Its primary function is to limit transient overvoltages caused by lightning strikes or switching operations in the power grid, thereby protecting downstream electrical equipment from damage. The SPD operates based on energy absorption and dissipation: when an overvoltage event occ
James
12/02/2025
Railway 10kV Power Through Lines: Design & Operation Requirements
Railway 10kV Power Through Lines: Design & Operation Requirements
The Daquan Line has a large power load, with numerous and scattered load points along the section. Each load point has a small capacity, with an average of one load point every 2-3 km, so two 10 kV power through lines should be adopted for power supply. High-speed railways use two lines for power supply: primary through line and comprehensive through line. The power sources of the two through lines are taken from the dedicated bus sections fed by the voltage regulators installed in each power di
Edwiin
11/26/2025
Neutral Grounding Methods for Conventional-Speed Railway Power Systems
Neutral Grounding Methods for Conventional-Speed Railway Power Systems
Railway power systems primarily consist of automatic block signaling lines, through-feeder power lines, railway substations and distribution stations, and incoming power supply lines. They provide electricity to critical railway operations—including signaling, communications, rolling stock systems, station passenger handling, and maintenance facilities. As an integral part of the national power grid, railway power systems exhibit distinct characteristics of both electrical power engineering and
Echo
11/26/2025
Application of Condition Monitoring Technology in UHV Transmission Lines
Application of Condition Monitoring Technology in UHV Transmission Lines
1. Application of Condition Monitoring Technology in UHV Transmission LinesAt present, the main characteristics of UHV (Ultra-High Voltage) transmission line condition monitoring technology in China are reflected in the following aspects: Comprehensiveness: In general, during the implementation of monitoring technology, supporting facilities and integrated systems are required to ensure effective monitoring performance; High value: UHV transmission line condition monitoring technology is a criti
Echo
11/20/2025
Send inquiry
Download
Get the IEE Business Application
Use the IEE-Business app to find equipment, obtain solutions, connect with experts, and participate in industry collaboration anytime, anywhere—fully supporting the development of your power projects and business.