Download the app

What is a circuit breaker?

07/10/2024


What is a circuit breaker?


Circuit breaker definition


Circuit breaker is a switch device composed of contact system, arc extinguishing system, operating mechanism, release device, housing, etc, which can close, carry and break the current under normal and abnormal conditions to protect the circuit and equipment from overload, short circuit and other faults.


Basic structure


  • Contact system

  • Arc extinguishing system

  • Operating mechanism

  • Release device

  • Shell


Working principle


When the short circuit, the magnetic field generated by the large current (generally 10 to 12 times) overcomes the reaction spring, the release device pulls the operating mechanism to act, and the switch is tripped instantaneously. When overloaded, the current becomes larger, the heat is intensified, and the bimetal sheet is deformed to a certain extent to promote the mechanism action (the greater the current, the shorter the action time).


Operating characteristics


  • Rated voltage

  • Rated current

  • Setting range of trip current for overload protection

  • Short circuit protection

  • Rated short circuit breaking current


Circuit breaker classification


Low-voltage circuit breaker : a manual switch function, and can automatically perform voltage loss, undervoltage, overload, and short circuit protection of the electrical appliances, can be used to distribute electrical energy, infrequently start asynchronous motors, the power line and motor protection, when serious overload or short circuit and undervoltage failures can automatically cut off the circuit.


低压断路器.png



High-voltage circuit breaker : the rated voltage of 3kV and above is mainly used to break and close the electrical circuit.



高压断路器.jpeg



Circuit breaker connection


  • Wiring mode behind the board

  • Plug-in connection mode

  • Drawer type wiring mode


Working condition


  • Temperature : upper ambient air temperature +40℃;  Lower limit of ambient air temperature -5℃; The average ambient air temperature for 24h does not exceed +35℃.

  • Elevation : The elevation of the installation site does not exceed 2000m.

  • Atmospheric conditions : the relative humidity of the atmosphere does not exceed 50% when the ambient air temperature is +40℃; It can have higher relative humidity at lower bottom temperature. The monthly average maximum relative humidity of the wettest month is 90%, while the monthly average minimum temperature of the month is +25 ° C, taking into account the condensation that occurs on the surface of the product due to temperature changes.

  • Pollution level : The pollution level is 3.


Development direction


  • Bulk

  • Intelligentize

  • Miniaturization

Topics
Basic knowledge Breaker

As an expert in the application and trends of electrical equipment, I have a profound mastery of knowledge in circuits, power electronics, etc. I possess a comprehensive set of abilities including equipment design, fault diagnosis, and project management. I can precisely grasp the industry's pulse and lead the development of the electrical field.

A hybrid DC circuit breaker
A hybrid DC circuit breaker
Most DC molded-case circuit breakers use natural air arc extinction, and there are typically two arc extinguishing methods: one is conventional opening and closing, where the contacts axially stretch the arc, while the conductive circuit generates a magnetic field that bends and elongates the arc, pulling it lengthwise perpendicular to the arc axis. This not only increases the arc length but also induces lateral motion, enabling air cooling to achieve arc extinction.The other method involves the
09/02/2025
Working Principle and Arc Extinction Mechanism of Magnetic Blowout Device in DC Circuit Breakers
Working Principle and Arc Extinction Mechanism of Magnetic Blowout Device in DC Circuit Breakers
The arc extinguishing system of a DC circuit breaker is crucial for the safe operation of equipment, as the arc generated during current interruption can damage contacts and compromise insulation.In AC systems, the current naturally passes through zero twice per cycle, and AC circuit breakers take full advantage of these zero-crossing points to extinguish the arc.However, DC systems lack natural current zero crossings, making arc extinction significantly more difficult for DC circuit breakers. T
09/02/2025
Key Technologies of Low-Voltage DC Solid-State Circuit Breakers
Key Technologies of Low-Voltage DC Solid-State Circuit Breakers
1 Technical Challenges1.1Stability of Device ParallelingIn practical applications, the current-carrying capacity of a single power electronic device is relatively limited. To meet high-current requirements, multiple devices are often connected in parallel. However, parameter variations between devices—such as slight differences in on-resistance and threshold voltage—can cause uneven current distribution during parallel operation. During switching transients, parasitic inductance and capacitance
09/02/2025
Can AC and DC circuit breakers be used interchangeably?
Can AC and DC circuit breakers be used interchangeably?
First of all, it must be clarified: AC circuit breakers must not be used to replace DC circuit breakers in DC circuits!Due to differences in arc generation and extinction processes between AC and DC, AC and DC circuit breakers with the same rated values do not have identical capabilities when interrupting DC power. Using AC circuit breakers in place of DC ones, or mixing AC and DC breakers, is one of the main causes of protection miscoordination and unintended upstream tripping.Circuit breakers
09/02/2025
Source professional electrical partners, experts, and explore smart grid & energy solutions.
Inquiry
Download
IEE-Business is dedicated to serving the personnel in the global power industry.
Join IEE-Business, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!
App Store App Store App Store App Store App Store App Store App Store App Store
App Store