Flowchart of the proposed ANN

IEEE Xplore
03/06/2024

The design and advantages of a novel light emitting diode (LED) bandwidth extension technique, based on the adoption of negative impedance converters (NICs), are discussed in the context of visible light communication systems. The design principles of the proposed negative impedance converter are introduced, with analytical derivations of the impedance frequency behaviour and the circuit performance frequency limitations. A two-transistor circuit is designed to generate a negative capacitance over the range -3 to -5 nF and is experimentally demonstrated, using discrete transistors, passive elements and commercially available LED constructed on a PCB, with frequencies up to 50 MHz. NIC design considerations necessary to obtain optimum LED bandwidth extension are discussed and outlined. Measurements demonstrate advantageously the optically lossless nature of the proposed solution and that, unlike traditional passive equalization or pre-distortion based bandwidth extension techniques, substantial improvement in the LED bandwidth, of up to 400 % can be obtained without compromising the output optical power.

Source: IEEE Xplore

Statement: Respect the original, good articles worth sharing, if there is infringement please contact delete.

IEEE Xplore

IEEE​ (pronounced "I-triple-E") stands for the ​Institute of Electrical and Electronics Engineers, a global professional organization dedicated to advancing technological innovation for the benefit of humanity. Founded in 1963 through the merger of the American Institute of Electrical Engineers (AIEE) and the Institute of Radio Engineers (IRE), IEEE has grown into the world’s largest technical professional society, with over ​400,000 members​ across ​160+ countries.

Surge Impedance Loading
Surge Impedance Loading
SIL DefinitionSurge Impedance Loading (SIL) is defined as the power a transmission line delivers to a load that matches the line’s surge impedance.Surge ImpedanceSurge Impedance is the balance point where capacitive and inductive reactances of a transmission line cancel each other out.Long transmission lines (> 250 km) inherently possess distributed inductance and capacitance. When activated, the capacitance feeds reactive power into the line, and the inductance absorbs it.Now if we take the
Encyclopedia
09/04/2024
What is a Capacitance Meter?
What is a Capacitance Meter?
What is a Capacitance Meter?Capacitance Meter DefinitionA capacitance meter is a device used to measure the capacitance of discrete capacitors.Working PrincipleIt operates based on the proportional relationship between capacitance and a time constant.Measurement MethodCapacitance is measured using a 555 timer by calculating the time period of oscillations.Role of 555 TimerThe 555 timer acts as an astable multivibrator, with its frequency determined by the unknown capacitance (CX).Practical UsePr
Encyclopedia
07/31/2024
What is Impedance Matching?
What is Impedance Matching?
What is Impedance Matching?Impedance Matching DefinitionImpedance matching is the process where the input and output impedances of an electrical load are adjusted to reduce signal reflection and maximize power transfer.Smith Chart ToolSmith charts help visualize and solve complex problems in RF engineering by representing parameters like impedance and reflection coefficients across frequencies.Circuit ExplanationImpedance matching circuits often use combinations of resistors, inductors, and capa
Encyclopedia
07/23/2024
A Review of Current-Limiting Control of Grid-Forming Inverters Under Symmetrical Disturbances
A Review of Current-Limiting Control of Grid-Forming Inverters Under Symmetrical Disturbances
Grid-forming (GFM) inverters are recognized as a viable solution to increase the penetration of renewable energy in bulk power systems. However, they are physically different from synchronous generators in terms of overcurrent capability. To protect the power semiconductor devices and support the power grid under severe symmetrical disturbances, the GFM control systems should be able to achieve the following requirements: current magnitude limitation, fault current contribution, and fault reco
IEEE Xplore
03/07/2024
Inquiry
Download
IEE-Business is dedicated to serving the personnel in the global power industry.
Join IEE-Business, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!