Free Expert Guides on Power Systems, Circuit Design & Electrical Troubleshooting

General Interior Lighting in Past and PresentWe know electric lighting in the early days when school rooms, offices and other general work areas were lighted by prismatic or translucent globes. These were suspended from the ceiling and housing incandescent lamps in such a way that such units provided lumens both directly and indirectly to the work plane. It happened through reflections from the room surfaces. Again the Glass enclosing globes were widely used to have high luminance. Thus this lig

Flood lighting is a type of artificial lighting that uses high-intensity, broad-beamed light sources to illuminate large areas such as outdoor playing fields, stadiums, buildings, monuments, landscapes, and other architectural features. Flood lighting can create dramatic effects, enhance visibility, improve safety and security, and provide aesthetic appeal.In this article, we will explain what flood lighting is, how it works, what are its main characteristics and types, and what are its applicat

Hospital lighting is an essential aspect of healthcare facilities that affect the well-being and performance of patients, staff, and visitors. Hospital lighting design should consider the specific needs and preferences of different spaces and users, as well as the energy efficiency and sustainability of the lighting system. In this article, we will discuss the main purpose and objectives of hospital lighting, the required illuminance levels and types of luminaires for various hospital areas, and

What is an Arc Lamp?An arc lamp is a type of electric lamp which produces light by creating an arc in the space between two electrodes when electrical energy is supplied. In the early 1800s, Sir Humphry Davy invented the first arc lamp. In that first lamp, two electrodes of carbon were used. The arc was produced between the electrodes in the air. It was used in searchlights, movie projectors (high-intensity light).Nowadays, gas discharge lamps are widely used. It is preferred to carbon arc lamps

Required Wiring ComponentsA tube light is not connected in the supply main directly. Although it operates at 230 V, 50 Hz, some auxiliary electrical components are used to insert in this installation to support the tube light operational principle. The total electrical components for single tube light installation are Choke: it is electromagnetic ballast orelectronic ballast Starter: Small neon glow up lamp Switch WiresPlease ensure that you take the appropriate electrical safety precautions whe

What is Tube Light?Tube shaped fluorescent lamp is termed as tube light. Tube light is a lamp that works on low pressure mercury vapor discharge phenomenon and converts ultra violate ray into visible ray with the help of phosphor coated inside glass tube.Material Used Inside the Tube LightThe materials used to build a tube light are given below. Filament coils as electrodes Phosphor coated glass bulb Mercury drop Inert gases (argon) Electrode shield End cap Glass stemAuxiliary Electrical Compone

A fluorescent tube light consists of a lime glass tube drop of mercury argon gas phosphor coating electrode coils mounting assemblies aluminum capTotal set up of a lamp requires two bases and electromagnetic ballast or choke coil with a starter. The electrode mount assemblies are at both the ends of lamp tube. This electrode mounting assembly is almost similar to the stem press unit in the incandescent lamps. The electrode is similar to theincandescent lampfilament. The filaments of electrodes p

What is Electronic Ballast?An electronic ballast (or electrical ballast) is a device that controls the starting voltage and the operating currents of lighting devices.It does this through the principle of electrical gas discharge. An electronic ballast will convert power frequency to a very high frequency to initialize the gas discharge process in Fluorescent Lamps – by controlling the voltage across the lamp and current through the lamp.Use of Electronics BallastThere are some advantages to use

In case of fluorescent lamp the mercury vapour pressure is maintained at lower level such that 60% of the total input energy gets converted into 253.7 nm single line. Again transition of the electrons requires least amount of input energy from a colliding electron. As pressure increases the chance of multiple collisions gets increased. A schematic diagram of mercury lamp is shown below. This lamp is containing an inner quartz arc tube and outer borosilicate glass envelope. The quartz tube is abl

What is Fluorescent Lamp?A fluorescent lamp is a low weight mercury vapour lamp that uses fluorescence to deliver visible light. An electric current in the gas energizes mercury vapor which delivers ultraviolet radiation through discharge process and the ultraviolet radiation causes the phosphor coating of the lamp inner wall to radiate visible light.A fluorescent lamp has changed over electrical energy into useful light energy to a great deal more proficiently than incandescent lamps. The norma