RWK Series Single Tool: FTU PC maintenance software. No primary electrical ratings; RS485 & RJ45 for FTU configuration and debugging.
PC program can set up and operate the device without using the network, particularly suitable for field testing. This software can test each communication protocol automatically, which is convenient for field test communication.
The device supports to log in the stand-alone software through RS485 serial port or RJ45 network port, the PC program does not need to be installed and can be directly open FTU maintain tool for use. The username is admin by default and the password is 123 by default. You can enter the interface by selecting Chinese and English.
RWK-35: Advanced 200mA SEF Recloser Controller compliant with ANSI C37.60. Smart brain for 12kV-38kV grid automation with DNP3.0/IEC104 multi-protocol support.
The Automatic Recloser Controller (with FA) is a crucial device in electrical systems. It ensures rapid re - closing of circuits after faults, enhancing power supply reliability.
The Line Sectionalizing Load Break Switch Controller is a key device. It manages the sectionalizing of power lines, ensures reliable power distribution, enhancing grid stability and operational safety
View Device function can real‑time display three‑phase voltage, current, switch status, battery status etc. View Packet can capture, save and clear communication packets for field protocol troubleshooting.
It supports base communication parameter configuration, upload/download device configuration; add, delete, adjust order for remote signal, remote meter and remote‑control point list, then upload modified parameters to FTU device.
Supports RS485 serial port and RJ45 network port for login. Default username: admin, default password: 123. It provides Chinese and English language switch on login page.
Login
