Drawings · Rw Energy

RWK-35/65 Auto Recloser Controller installation drawing

Matched with 10kV~38kV pole-mounted vacuum auto reclosers for urban, suburban and rural overhead distribution networks. Widely used in long-distance overhead feeders, distributed power grid connection lines and rural grid upgrading projects. The installat

Add us on Google

Updated2026.09

LanguageEnglish

FileDWG · 1.2 MB

Auto Recloser Controllerinstallation drawing

Document description

This is an installation drawing for the RWK-35/65 series Auto Recloser Controller.

ROCKWILL RWK-35/65 Auto Recloser Controller is an outdoor intelligent protection and control unit specially developed to match medium voltage pole-mounted vacuum auto reclosers. The installation drawing illustrates overall dimension layout, pole mounting bracket structure, cable entry arrangement, earthing connection and field installation assembly requirements of the controller. It integrates high-precision voltage and current signal sampling, phase overcurrent and earth fault protection, multi-shot programmable auto-reclose sequence, fault waveform recording, local HMI setting and remote communication functions. The product complies with IEC 60255-1:2018, IEC 60255-26:2020 and IEC 62271-111:2019 standards. Relevant documents include Type Test Certificate No. TT-2025-04192, Witness Test Report No. WT-2025-09125, Routine Factory Test Report No. FT-2025 series, Raw Material Mill Certificates, all issued by CNAS accredited independent test laboratory and available for tender submission, utility review and project site acceptance. Adopting stainless steel IP65 tropicalised anti-corrosion and UV resistant enclosure, it supports dual power supply with external auxiliary power and built-in backup battery, suitable for long-term pole-mounted outdoor installation.

Frequently asked questions

How to select current sensor or current transformer specifications for Rockwill Smart Recloser?

The Rockwill standard smart recloser offers high precision with a wide measuring range (2A–16,000A). Simply ensure your normal current is within this standard range when making a selection.

Does Rockwell Energy offer an MV Smart Auto Recloser capable of measuring primary currents as low as 0.1A?

Yes. In addition to the standard 2A–16,000A range, Rockwell Energy provides custom-configured units for ultra-low current measurement and protection in the 0.1A–2A range.

What is the core function of the RWK-35/65 Auto Recloser Controller?

The RWK-35/65 Auto Recloser Controller provides complete protection and control functions for matched vacuum auto reclosers, including phase overcurrent protection, earth fault protection, programmable multi-shot auto-reclose logic, fault recording and event logging, to realize automatic fault isolation and power restoration for overhead distribution lines.

What international standards and certification does the RWK-35/65 Auto Recloser Controller comply with?

The RWK-35/65 Auto Recloser Controller is designed and tested in accordance with IEC 60255-1:2018, IEC 60255-26:2020 and IEC 62271-111:2019 standards. It is supported by complete Type Test Certificate No. TT-2025-04192, Witness Test Report No. WT-2025-09125, factory test reports and material certificates for project review and acceptance.

What power supply configuration does the RWK-35/65 Auto Recloser Controller adopt?

The RWK-35/65 Auto Recloser Controller adopts dual power supply design, which can be powered by external auxiliary power and equipped with built-in backup battery with anti-over-discharge protection. It can complete opening and closing operations and maintain all control functions even when external auxiliary power fails.

What communication interfaces and protocols does the RWK-35/65 Auto Recloser Controller support?

The RWK-35/65 Auto Recloser Controller is equipped with RS485 and Ethernet communication ports, supporting Modbus, DNP3 and IEC 60870-5-104 protocols. It can upload real-time electrical parameters, fault records and equipment operation status to the SCADA system for remote monitoring and control.

What installation requirements are specified in the installation drawing for the RWK-35/65 Auto Recloser Controller?

The installation drawing specifies vertical pole mounting of the RWK-35/65 Auto Recloser Controller with dedicated mounting brackets. Maintain sufficient clearance between the controller and matched recloser, ensure proper cable gland sealing and reliable protective earthing after installation to prevent water ingress and corrosion.

RW Energy

Manufacturers

Profile

100-500 2013 China

Zhejiang Rockwell Energy Technology Co., Ltd. is an international enterprise specializing in the research, development and manufacturing of recloser controllers, power quality management, power monitoring systems and other high-end power equipment. In today's critical period of global energy transition and power system upgrading, the company has gathered a group of top talents in the fields of power engineering, automation control, software development, etc., who carry the enthusiasm and persistence for the power business, and are committed to overcoming the complex problems in the power system, and promoting the intelligent development of the power industry with innovative technology. Mission: To make global electricity smarter, more reliable and more efficient with innovative technology. Vision: To be the leader in global power intelligence.

Manager

RW Energy

Learn more

RWK-35/65 Auto Recloser Controller installation drawing

Document description

Related Products

RWK-35 Recloser Controller | ANSI C37.60 Protection & DNP3.0

Advanced Recloser Controller

Frequently asked questions