RPS Series Outdoor Pole-Mounted Load Break Switch
Widely used in urban and rural overhead distribution lines, ring main power supply, line segmentation, fault isolation, and supporting intelligent distribution network reconstruction.
Widely used in urban and rural overhead distribution lines, ring main power supply, line segmentation, fault isolation, and supporting intelligent distribution network reconstruction.
The RPS-630A is a pole-mounted, SF₆ gas-insulated AC high-voltage load switch designed for distribution systems rated at 12kV, 24kV, or 40.5kV, with a rated current of 630A and frequencies of 50/60Hz.
RPS series outdoor pole-mounted load break switch is SF6 insulated maintenance-free switchgear complying with IEC standards and KEMA type tested. It is available in 15kV, 24kV and 38kV voltage classes with 400A/630A rated current. Featuring fully sealed stainless steel tank, visible isolation gap, gas density monitoring and optional integrated sensors, it supports manual, motorized and remote control. It is widely applied for overhead line segmentation, loop closing and fault isolation in medium voltage distribution networks.
Rockwill FKW18 outdoor medium voltage load break switch for 12kV–40.5kV networks. Air load break technology, 630A, reliable arc extinguishing, manual/electric operation.
Outdoor pole-mounted SF6 load break switch for 40.5kV systems, offering durable, maintenance-free switching for overhead distribution networks.
Two operation modes are available: manual operation via insulated operating rod, or motor‑driven operation for remote distribution‑automation control.
Optional add‑ons include CT, CVD voltage sensor, SF₆ gas density monitor, lightning arresters, to realize line monitoring, voltage sensing and over‑voltage protection.