Widely used in urban and rural overhead distribution lines, ring main power supply, line segmentation, fault isolation, and supporting intelligent distribution network reconstruction.
The RPS-630A is a pole-mounted, SF₆ gas-insulated AC high-voltage load switch designed for distribution systems rated at 12kV, 24kV, or 40.5kV, with a rated current of 630A and frequencies of 50/60Hz.
RPS series outdoor pole-mounted load break switch is SF6 insulated maintenance-free switchgear complying with IEC standards and KEMA type tested. It is available in 15kV, 24kV and 38kV voltage classes with 400A/630A rated current. Featuring fully sealed stainless steel tank, visible isolation gap, gas density monitoring and optional integrated sensors, it supports manual, motorized and remote control. It is widely applied for overhead line segmentation, loop closing and fault isolation in medium voltage distribution networks.
SF6 gas insulated pole-mounted auto sectionalizer for 12kV, 24kV, and 36kV lines, providing durable, maintenance-free fault isolation.
Outdoor sectionalizing vacuum load break switch for 12kV lines, enabling safe isolation of faulted sections to restore power quickly.
Manual cable-outgoing pole-mounted SF6 load break switch for 40.5kV, enabling safe, on-pole circuit interruption and isolation.
Tersedia dua mode operasi: operasi manual melalui tongkat operasi terinsulasi, atau operasi berpenggerak motor untuk kendali otomasi distribusi jarak jauh.
Tambahan opsional meliputi CT, sensor tegangan CVD, monitor densitas gas SF₆, dan arrester petir, untuk mewujudkan pemantauan saluran, penginderaan tegangan, dan proteksi tegangan lebih.
Masuk
