12 LSVR automatic voltage regulators deployed in Licheng, Shanxi, to solve rural "low voltage" & PV overvoltage. Compliant with IEC/GB standards for enhanced reliability.
Certain rural distribution areas in Licheng County, Changzhi City, Shanxi Province, faced typical "end-of-line voltage quality" issues. With the rapid growth of rural electricity loads and the implementation of distributed photovoltaic (PV) policies, the existing distribution infrastructure faced dual pressures:

The power supply company required a low-voltage regulation solution capable of automatic, rapid response and bi-directional adjustment to stabilize terminal voltage within the national standard range (220V ±7%) without large-scale line reconstruction.
For the complex conditions of this area, 12 units of LSVR-90-0.4/4 low-voltage automatic voltage regulators were selected. The equipment is strictly designed in accordance with IEC 60076-1:2011 and relevant GB standards. The equipment utilizes series compensation principles, achieving precise voltage adjustment by automatically switching transformer taps.
The specific configuration for this project is as follows:
| Parameter |
Technical Specifications / Performance |
|---|---|
| Model |
LSVR-90-0.4/4 |
| Phases |
Three-phase |
| Rated Voltage |
380V |
| Rated Capacity |
90kVA |
| Adjustment Taps |
5 Taps |
| Adjustment Range |
±20% (Meets extreme low voltage compensation and PV high voltage suppression) |
| Regulation Mode |
Individual Phase Regulation (Effectively solves voltage deviation caused by unbalanced loads) |
| Response Time |
≤ 100s (Controller sampling frequency and logic support automatic delay adjustment based on deviation—larger deviation leads to faster action) |
| Total Loss |
≤ 0.5% |
| Bypass Operation |
Automatic bypass function (Switches during faults or when voltage is qualified; ensures no power interruption) |
| Cooling Mode |
Natural cooling + Forced air cooling |
| Connection |
Series Connection |
| Installation |
Outdoor Pole-mounted Installation |
The LSVR Low-Voltage Automatic Voltage Regulator is mainly composed of a compensation transformer, an intelligent regulation switch, a control system and auxiliary systems. Its wiring schematic diagram is shown as follows:


All 12 units underwent rigorous Routine Tests before leaving the factory:
The equipment was Pole-mounted, installed directly at the end of the distribution zone or at the start of branches with severe voltage fluctuations. This eliminated the need for additional land acquisition, shortened construction cycles, and reduced overall project costs.

The LSVR-90-0.4/4 is an economical and efficient tool for solving rural power grid voltage issues. Through this deployment, the Licheng Power Supply Company resolved long-standing terminal power quality issues with minimal investment. This effectively improved local residents' electricity satisfaction.