Intelligent Drive: An Efikwekwa Ọdịnala Nke Ekwesịghị Mba Gbasara Ihe Nchekwa Na Transformer Site 10kV

4yrs + staff 10000+m² US$150,000,000+ China

1.Introduction

1.1 Urgent Need for Upgrading Distribution Transformers

Rising Load Density

A cikin lokacin gaban, mafi girman tashar muhimmanci suna da shiga tsakiyar yawan karkara (daga 15 hada zuwa 25°C a wasu halayen). Yawan karkara mai tsawo suna koyar hankali masu zuba (kamar paper-oil systems), wanda ke tsara tsakanin abubuwan da suka gane (da 40% na fadada).

Power Quality Disturbances

Ziyartar tasiri > ±10% daga ma'ana mai ba da shi suna koyar hankali wurare masu kyau (kamar medical devices, data centers). Harmonic pollution (THD > 8%) daga nonlinear loads (PV inverters, EV chargers) suna koyar hankali wurare masu kyau da kuma koyar hankalin daidai (up to 12% in HVAC systems).

Operational & Maintenance Inefficiencies

Binciken kofin da ya kai kowace shekarun 6-12 suna da sauransu (kamar partial discharge ko oil degradation). Kofin O&M suna ci gaba (25-30% kowace shekara don kofin da kayan adawa), wanda ke kusa koyar hankalin ROI masu karkara.

1.2 Intelligent Technologies Empowering Grid Management

Sensor Monitoring

Saka intelligent sensors a cikin distribution transformers:

Temperature: PT100 sensors (±0.1°C) for windings;

Current/Voltage: Hall-effect sensors (0.5% accuracy, 10kA/400V)

Vibration: MEMS accelerometers (50mV/g);

Partial Discharge: Ultrasonic sensors (20 - 150kHz);

Environmental: Humidity/CO₂ sensors

Technology-Integrated Terminal (TTU)

The edge computing-enabled TTU implements:

Multi-protocol Acquisition: IEC61850, Modbus;

Analytics: FPGA for harmonics, LSTM for load forecasts

Security Architecture: TLS 1.3, HSM;

Control Capabilities: Auto-reclosing, OLTC regulation

Diagnostic System Decision-Making

The AI-enhanced diagnostic platform features:

Multi-source Fusion: Combines vibration, DGA, thermal data;

Fault Prognostics: CNN for classification, Monte Carlo for RUL

Optimization Engine: Genetic algo for scheduling, digital twins;

Compliance Management: IEC60599, NERC audits

1.3 Intelligent Transformation to Address Power Grid Challenges

Enhancing Power Supply Reliability

Monitoring: Use PT100 sensors (±0.5°C) for winding temp, UHF sensors (300 - 1500MHz) for partial discharge, and MEMS accelerometers (50mV/g) for vibration.

Diagnostics: LSTM - based detection (10,000+ cases), digital twin (error <0.3%).

Self - Healing: IEC61850 for breaker coord., reactive power comp. for voltage.

Optimizing Energy Allocation

Renewables: Mitigate PV/wind with MPPT, coord. batteries (SOC ±2%).

Load Mgmt: Reinforcement - learning forecast (error <3%), tariff response (peak shaving +18%).

Power Quality: Active filtering (THD <3%), voltage sag comp. (<20ms).

Reducing Operational & Maintenance Costs

Faults: Transformer - specific detection (AUC >0.95), RUL pred. (±5%).

Decision: Prioritize with FMEA + cost - benefit, optimize inventory (accuracy >90%).

Remote: 5G param. adj., AR - assisted (98% loc. accuracy).

2.Challenges faced by distribution transformers

2.1 Rising Load Density

Overload Pressure

Yawan girman a lokacin gaban suna koyar hankali yawan karkara, wanda ke tsara tsakanin abubuwan da suka gane da kuma koyar hankalin thermal runaway, short-circuits, da kuma yawan lokaci mai tsawo.

Power Quality Degradation

Yawan tasiri mai yawa, yawan frequency mai yawa, da kuma harmonic distortions (daga renewables ko nonlinear loads) suna koyar hankali daidai da kuma koyar hankalin wurare masu kyau.

Inadequate Operational & Maintenance

Binciken kofin da ya kai kowace shekarun suna da sauransu, wanda ke kusa koyar hankalin outages mai gaba da kuma kofin mai yawa.

2.2 Diversified Electricity Demand

Diversified Electricity Demand

End-users now demand higher power quality. Key requirements are voltage stability (±1% fluctuation), frequency stability (±0.1 Hz deviation), and low harmonic distortion (THD < 5%). This is due to more sensitive digital devices and industrial automation.

Limitations of Traditional Transformers

- Can't handle dynamic load changes well due to static impedance design.

- Only have basic passive LC harmonic filters, not enough.

- Poor at regulating voltage with variable renewable energy.

- Don't work well with bidirectional power from distributed energy resources (DERs).

- Smart transformers with power electronics and compensation modules are needed.

Challenges of New Energy Integration

Renewable energy is growing fast (solar PV at +35% CAGR, wind at +18% CAGR):

- Intermittency causes frequency deviations (0.2 - 0.5 Hz in weak grids).

- PV inverters inject DC components, disrupting grid sync.

- Capacitive reactive power can cause overvoltages in low-load times.

- Harmonics from multi-stage inverters (up to 11th order).

2.3 Complexification of Power Grid Structure

Complexification of Power Grid Structure

With the development of smart grids and micro-grids, and the integration of distributed energy resources into the grid, the power grid now encompasses a diverse array of equipment and intricate wiring configurations.

High Difficulty in Operation and Maintenance

The increasing complexity has significantly escalated the challenges in operation and maintenance, driving up associated costs. Delays in issue resolution can potentially trigger the spread of faults, leading to more severe consequences.

Efficient and Precise Operation and Maintenance

To address these issues, it is imperative to innovate operation and maintenance management models. This involves enhancing the professional capabilities of operation and maintenance personnel and introducing intelligent operation and maintenance tools and advanced technologies.

3.Realization effect

3.1 Technical - Driven Efficiency Revolution

Real-time Operation and Maintenance Monitoring

By leveraging sensors and Internet of Things (IoT) technologies, real-time monitoring and remote control of the operation status of distribution transformers can be realized. This significantly enhances the timeliness and accuracy of operation and maintenance work.

Rapid Fault Response

The intelligent system is capable of quickly identifying faults and triggering the alarm mechanism. As a result, it shortens the time required for fault detection and response, minimizes economic losses, and ensures the stable operation of the power supply.

Predictive Maintenance

By applying big data analysis and AI, potential equipment failures can be predicted in advance. Accordingly, preventive maintenance plans are made. This not only cuts operation and maintenance costs but also prolongs equipment service life and boosts its operational efficiency.

Fine-grained Management

With intelligent transformation, power enterprises can achieve fine-grained management of power supply services. This leads to an improvement in the reliability and stability of power supply, ultimately providing users with a better power-using experience.

3.2 Digital Upgrade of Power Grid Resilience

Real-Time Data Collection

IoT sensors at substations, transformers, and distribution nodes collect grid data. Multi-channel systems integrate SCADA, EMS, and PMU-PDC to synchronize time-stamped data. Edge computing uses wavelet transforms to preprocess data, filtering noise while keeping key transient features.

Emergency Response

Self-healing algorithms isolate faults in under 200ms. Digital twins precompute reconfiguration strategies. Coordinated SCADA-EMS actions maintain voltage stability.

Weak Link Detection

AI platforms correlate real-time data with historical failures. Machine learning models predict component degradation for maintenance. Risk scoring systems prioritize vulnerabilities with N-1 analysis and simulations.

Continuous Monitoring

Phasor measurement networks detect low-frequency oscillations. Blockchain ensures data integrity. Reinforcement learning optimizes preventive actions based on real-time risks and forecasts.

3.3 Strategic Pillars for Industry Transformation

Enhanced Service Quality

AI-driven platforms optimize end-to-end services via predictive analytics and resource allocation. Edge computing ensures sub-50ms latency for key decisions on load balancing and fault tolerance.

Digital Transformation Acceleration

Blockchain-enabled AMI and 5G-IoT networks enable secure real-time data exchange. Digital twin platforms simulate over 10,000 grid nodes, optimizing dispatch with reinforcement learning.

Advanced Monitoring & Prediction

Smart transformers with 1kHz sensors do microsecond-level transient analysis. Hybrid ML models (LSTM-CNN) predict winding and bushing issues with 98% accuracy, cutting unplanned outages by 40%.

Innovative Digital Services

AI-powered aggregators offer dynamic pricing and demand response. VPP platforms aggregate 500MW+ resources for ancillary services, generating over $12M annually.

4.Future Prospects

4.1 Continuous Optimization & Innovation of Intelligent Technologies

Technology Integration & Enhancement

Hybrid AI (CNN-LSTM) combines with 5G-IoT sensor networks (vibration/temperature) for multi-D monitoring. Edge computing preprocesses data with federated learning, detecting partial discharge with 99.2% accuracy and <50ms latency.

Intelligent Operation Management

Digital twins simulate transformer heat under different loads (0-120% capacity) to optimize cooling. Predictive maintenance models (aging index) cut unplanned outages by 35% via N-1 analysis.

Autonomous Diagnosis & Self-Recovery

Blockchain-secured logs help cross-device anomaly detection with federated neural nets. Self-healing isolates faulty windings in <150ms by IED coordination, and drone thermal imaging checks repairs.

4.2 Widespread Application of Intelligent Transformers