| Brand | Wone |
| Model NO. | WDDL-1000A Portable High Current Generator Current booster |
| Rated voltage | 220×（1±10%）V |
| Series | WDDL-1000A |
Description
WDDL-100A high current generator (referred to as current booster) adopts numerical control technology and has strong anti-interference ability. The produced converter has the advantages of large output power, small size and light weight. Mainly used for primary busbar protection and the transformation ratio of various current transformers and other testing projects, is widely used in electric power, railway, petrochemical, metallurgy and mining and other enterprises in scientific research, production and electrical test sites.
Specifications
Input voltage: AC220V ±10%
Power: 5KVA
Output current: AC0～1000A stepless adjustable, panel with digital ammeter
Output voltage: 5V
Output waveform: The output current is a standard sine wave with small burrs, which is better than the power system requirements and standards, and the ripple coefficient is less than 0.3%. Standard sine wave.
Measurement accuracy: (using 0.2S grade material) is actually around 0.3; each current can be adjusted smoothly, steadily and continuously, and the accuracy is higher than 0.5 grade. The current and voltmeter display is a true effective value, with high precision and high stability.
Output current mode: true RMS continuously adjustable;
Current stability: 0.2%
Structural form: one piece
Wiring method: as required
Current stability: 0.2%;
Protection settings: overcurrent, overvoltage
-
Strange Devices on Transmission Lines: 5 Little-Known Practical Functions（1）1 Aviation Warning SpheresAviation warning spheres, also known as reflective safety spheres, are used on overhead transmission lines near airports, especially on extra-high-voltage (above 220kV) lines and river-crossing transmission lines. Highly visible aviation marker spheres (aviation warning spheres) must be installed along the lines to provide warning signals.The aviation marker sphere (aviation warning sphere) has a diameter of ф=600mm. The sphere can be manufactured in various bright coloLeon09/04/2025 -
Transmission LineIn transmission lines, a "π" connection involves breaking the original line from Substation A to Substation B and inserting Substation C, forming a "π" configuration. After the "π" connection, the original single line is divided into two independent transmission lines. Following the "π" connection, Substations B and C may both be powered by Substation A (in this case, Substation C receives power via a feeder from Substation B's busbar, or possibly from another voltage point within Substation B);Encyclopedia09/04/2025 -
What are the principles of forced re-energization of transmission lines?Principles of Forced Re-energization of Transmission LinesRegulations for Forced Re-energization of Transmission Lines Correctly select the forced re-energization end of the line. If necessary, change the connection configuration before forced re-energization, taking into account the reduction of short-circuit capacity and its impact on grid stability. There must be a transformer with its neutral point directly grounded on the busbar at the forced re-energization end. Pay attention to the impactEdwiin09/04/2025 -
Analysis of Accident Handling in Transmission LinesAnalysis of Transmission Line Fault HandlingAs a fundamental component of the power grid, transmission lines are widely distributed and numerous, often exposed to diverse geographical and climatic conditions, making them highly susceptible to faults. Common causes include overvoltage, pollution flashover, insulation damage, tree encroachment, and external damage. Line tripping is one of the most frequent faults in power plant and substation operations, with fault types including single-phase-to-Leon09/04/2025 -
The difference between transmission and distribution linesTransmission lines and distribution lines are both used to carry electrical power from one location to another. However, they differ significantly in key aspects such as primary function, voltage levels, phase configuration, and conductor placement. These differences are essential for understanding their distinct roles in the power system.The Difference Between Transmission and Distribution Line is given below in the tabulated form.Electricity generation is a critical component of the power systEdwiin09/04/2025 -
Ensuring Reliability: A Deep Dive into Transformer MaintenanceIntroductionElectric transformers are the backbone of modern power distribution systems, silently enabling the reliable delivery of electricity to homes, businesses, and industries. As these critical assets age and the demand for uninterrupted power grows, the importance of diligent transformer maintenance has never been greater. This essay explores the essential role of transformer maintenance, highlighting the value of proactive care, the impact of advanced diagnostic technologies, and the traVziman09/03/2025
