| Brand | Wone |
| Model NO. | TYD Capacitor voltage transformer |
| Rated voltage | 40.5kV |
| Series | TYD |
Product introduction:
Capacitor voltage transformer is mainly used in power frequency power system to meet the IEC/IEEE standard, outdoor rated voltage 40.5-1100kV, frequency 50/60Hz neutral point effective grounding system/neutral point non effective grounding system to provide voltage signals for electrical measuring instruments and protection and con trol devices, and also as coupling capacitor for power carrier communication system.
Product features:
●It has excellent performance in suppressing ferromagnetic resonance. With a speed saturation damping device, it has fast transient response and can reliably damp ferromagnetic resonance. It can meet the test requirements of 320 times of ferromagnetic resonance under 0-1.5Un, and can effectively suppress ferromagnetic resonance within 10 cycles. The peak value of the secondary voltage of the product drops to 5% of the peak value of the secondary voltage before the short circuit within 0.02s.
●Capacitor voltage transformer has medium voltage switch function, which is convenient for on-site operation and maintenance.
●Porcelain bushing and flange are used for integral casting to reduce bolt connection, improve sealing perfor mance and reduce the risk of oil leakage.
●It is easy to install and maintain. Phoenix Contact terminals are used to facilitate user wiring.
●The oil tank is of cast aluminum structure, which is free of rust after long-term use.
Remark: Approximate dimensions and weights for special requirements, please consult us.
-
Strange Devices on Transmission Lines: 5 Little-Known Practical Functions（1）1 Aviation Warning SpheresAviation warning spheres, also known as reflective safety spheres, are used on overhead transmission lines near airports, especially on extra-high-voltage (above 220kV) lines and river-crossing transmission lines. Highly visible aviation marker spheres (aviation warning spheres) must be installed along the lines to provide warning signals.The aviation marker sphere (aviation warning sphere) has a diameter of ф=600mm. The sphere can be manufactured in various bright coloLeon09/04/2025 -
Transmission LineIn transmission lines, a "π" connection involves breaking the original line from Substation A to Substation B and inserting Substation C, forming a "π" configuration. After the "π" connection, the original single line is divided into two independent transmission lines. Following the "π" connection, Substations B and C may both be powered by Substation A (in this case, Substation C receives power via a feeder from Substation B's busbar, or possibly from another voltage point within Substation B);Encyclopedia09/04/2025 -
What are the principles of forced re-energization of transmission lines?Principles of Forced Re-energization of Transmission LinesRegulations for Forced Re-energization of Transmission Lines Correctly select the forced re-energization end of the line. If necessary, change the connection configuration before forced re-energization, taking into account the reduction of short-circuit capacity and its impact on grid stability. There must be a transformer with its neutral point directly grounded on the busbar at the forced re-energization end. Pay attention to the impactEdwiin09/04/2025 -
Analysis of Accident Handling in Transmission LinesAnalysis of Transmission Line Fault HandlingAs a fundamental component of the power grid, transmission lines are widely distributed and numerous, often exposed to diverse geographical and climatic conditions, making them highly susceptible to faults. Common causes include overvoltage, pollution flashover, insulation damage, tree encroachment, and external damage. Line tripping is one of the most frequent faults in power plant and substation operations, with fault types including single-phase-to-Leon09/04/2025 -
The difference between transmission and distribution linesTransmission lines and distribution lines are both used to carry electrical power from one location to another. However, they differ significantly in key aspects such as primary function, voltage levels, phase configuration, and conductor placement. These differences are essential for understanding their distinct roles in the power system.The Difference Between Transmission and Distribution Line is given below in the tabulated form.Electricity generation is a critical component of the power systEdwiin09/04/2025 -
Ensuring Reliability: A Deep Dive into Transformer MaintenanceIntroductionElectric transformers are the backbone of modern power distribution systems, silently enabling the reliable delivery of electricity to homes, businesses, and industries. As these critical assets age and the demand for uninterrupted power grows, the importance of diligent transformer maintenance has never been greater. This essay explores the essential role of transformer maintenance, highlighting the value of proactive care, the impact of advanced diagnostic technologies, and the traVziman09/03/2025
