SAFE-ESTOP Gwọ́n Ọ̀dọ̀ Njẹmáà
Abubuwa gaba
| Muhimmiya | Switchgear parts |
| Model NO. | SAFE-ESTOP Gwọ́n Ọ̀dọ̀ Njẹmáà |
| Rated Frequency | 50/60Hz |
| Siri | SAFE |
Bayani na sayen daga mai wuyaci
SAFE-ESTOP jin da shaida mai kawo, masu babban hawa da kofin tsohon lokaci, kuma kofin kungiyar cikakki har zuwa SIL 3 da Cat. 4, PL e a cikin EN 62061 / EN 61508 da EN ISO 13849, an haɗa shi ne TÜV Rheinland, ƙarin da kuma biyu na iya yi aiki ko bane, ido da kuma yara, 3 kofin tsohon lokaci, nominal input voltage: 24 V DC, max. switching capacity 250 V AC / 6 A, pluggable screw terminal blocks
Kofin tsohon lokaci masu shaida mai kawo, masu babban hawa da kofin tsohon lokaci kungiyar cikakki
Function
3 kofin tsohon lokaci, 1 auxiliary contact, 1- ko 2-channel input, auto and manual start, har zuwa SIL 3 / Cat. 4, PL e, 24 V DC, width: 22.5 mm
Features
3 N/O Safety Contacts
1 N/C Auxiliary Contact
PL e, Category 4 (EN ISO 13849-1)
SIL CL 3 (EN 62061 / IEC 61508)
| Parameter | Specification |
|---|---|
| In compliance with | EN 60204 - 1; EN ISO 13849 - 1; IEC 62061; IEC 61508 Parts 1 - 2 and 4 - 7 |
| Operating voltage | DC 24 V +/- 10 % |
| Power consumption | 2.6 W |
| Inrush current | 5 A (approx. 250 μs) |
| Pulse suppression (A1/S12/S14) | max. 3 ms (pulse width)/500 ms (pulse rate)
|
| Safe contact configuration | 3 non - delayed safety contacts (NO) |
| Auxiliary contacts | 1 non - delayed auxiliary contact (NC) |
| Max. switching voltage | AC 250 V |
| Contact rating of safety contacts (13 - 14, 23 - 24, 33 - 34)
|
AC: 250 V, 2000 VA, 8 A for resistive load
|
| Thermal current Ith | Max. 5 A per contact (see total current limit curve) |
| Contact rating of auxiliary contact | AC: 250 V, 500 VA, 2 A for resistive load
|
| Minimum contact load | 5 V, 10 mA |
| External fuses | 10 A gG (NO); 6 A gG (NC) |
| Max. switch - on delay | < 50 ms |
| Max. switch - off delay | Via A1: < 40 ms; Via S12 or S13/S14 < 20 ms |
| Recovery time | < 500 ms |
| Wire width | 0.14 - 2.5 mm² |
| Tightening moment (Min./Max.) | 0.5 Nm/0.6 Nm |
| Contact material | AgSnO₂ |
| Service Life | mech. approx. 1×10⁷ |
| Rated impulse withstand voltage | 2.5 kV (control voltage/contacts) |
| Dielectric strength | 4 kV (DIN VDE 0110 - 1) |
| Rated insulation voltage | 250 V |
| Degree of pollution/Overvoltage category | 2/3 (DIN VDE 0110 - 0) |
| Protection | IP20 |
| Temperature range Ambient | - 15 °C to + 55 °C |
| Temperature range Storage | - 15 °C to + 85 °C |
| Max. altitude | ≤ 2000 m (above sea level) |
| Weight approx. | 150 g |
| Mounting DIN rail according to EN 60715 | TH35 |
Kayan da ke zuwa
kima mai yiwuwa da wata
Waktu na kirma
100.0%
≤4h
Gaskiya ta hanyar kamfanin
Workplace: 1000m²
Jami'a nanan mafi girma:
Zama-zama na Farko da aka Fitowa a Shekarar (USD): 300000000
Aiki
Turanci Masana: Sallar
Ƙananunan Cigaba: Aakwụkwọ ọnụọgụ/Gwadàbwata/Gwọ́n ọkụ̀ àbálòpà/Low voltage electrical equipment/Maimaitar da kimiyya/Ajiyayi na farko/Kọ̀mọ́ àwọn ẹ̀ka ìjìnlẹ̀ ènìyàn
Mafarkin tsoro na yawan kulle
Kayan aiki na alaka da amfani, yin amfani, gyara-gyaran da kuma pasuwa na kayan karkashin yanayi, suka kentuwa da kaiwansu masu iko, ingantacciyar hankali da kuma amfani mai kyau.
mabudin aikatan kayan dabbobi sun dawo da idoni masu iko da ma'ajiriyya, sannan suka tabbata inganci, kwayoyin uku da na'ibbicci ne daga babban kayan aikin
Makarantar Mai Yawanci
-
Digital Timer Switch THC 20-1C Weekly Programmable Dijital Saat Anahtarı THC 20-1C Haftalık Programlanabilir
-
Digital Timer Switch THC 15A Programmable Periodic Timer Gadangwa Digital Timer Switch THC 15A Programmable Periodic Timer
-
Aiki na Digital Timer Switch THC 810 Weekly Programmable
-
Digital Timer Switch TS-GE2 Programmable Periodic Timer Aƙo ƙarfin lokaci na iye-iye da ake gaba-gaba da shi a kan IEE-Business
-
Relay na Kontrol Lefa GRL8-01 02
-
Relay Ji Nako 3 Phase Voltage GRV8 -09/10
-
Relay na Voltage na 3 Phase GRV8-03 to 08
Zan'antar Ilimi
-
Tasirin DC Bias a Turbin da Yankin Masana'antu na UHVDC Grounding ElectrodesTasirin Dabi na Tansufa a Makarantun Iyali da Turuwar UHVDCIdan karamin iyali na tansufa na Ultra-High-Voltage Direct Current (UHVDC) yana cikin makarantun iyali na turuwa, zai iya haifar da ci gaba da ke faruwa a kan iyali. Wannan ci gaba da ke faruwa zai iya haifar da ci gaban neutral-point na tansufa daban-daban, wanda ke shafi DC bias (ko DC offset) a dukkun tansufa. Wannan DC bias zai iya rage muhimmanci na tansufa, kuma a wasu lokutan zai iya haifar da lalace-gabashin abubuwa. Saboda haka,01/15/2026 -
HECI GCB for Generators – Fast SF₆ Circuit Breaker HECI GCB for Generators – Karamin Kirki na SF₆1. Tasharrafu da Funtuka1.1 Ruhunin Kirkiyar Kirkiyar KuliyaKirkiyar Kirkiyar Kuliya (GCB) shi ne tushen kawo kawo da ake iya gudanar da ita wanda yake kan bayan kuliya da kirkiyars gudanar da abubuwan rayuwa. An fi sani da shi a matsayin muhimmanci na kuliya da grid ta masara. Funtukan da suka biyo sun hada da gudanar da abubuwan dole na kuliya da kuma gudanar da abubuwan rayuwar da aka yi a lokacin da ake haɗa da kuliya da kuma grid ta masara. Addinin da GCB ya yi ba shi da cikakken farko da k01/06/2026 -
Makaranta na Kula da Turbin Kirkiya na Ibari da Tufafi1. Kirki na Iya Aikin da Karkashin Kirki Bude kirkar tsohon (LV) na kirki da ake iya aiki, kare kuli mai kontrola, saka shirin "Ba a Bude" a karamin kuli. Bude kirkar yawan (HV) na kirki da ake iya aiki, bude kirkar tsakiyar, kula tsakar kirki, kula kirkar HV, saka shirin "Ba a Bude" a karamin kuli. Don kirki na iya aiki mai hankali: kara kwalba na kwalba mai kyau da kuma zafi; tana bayyana zafi, gaskiya, da kwalba mai kyau don kusa, karamin gaskiya, da kuma kwalba mai kyau; tana bayyana kasa da12/25/2025 -
Kanan Da Koyar Gargajiya Zafiya na Masana'antu na IkkitaA yayin daidai, zama’ar halitta ta sarrafa’u na distribution transformers yana dawo gaba biyu: zama’ar halitta akan high-voltage (HV) winding da low-voltage (LV) winding plus tank na sarrafan, da zama’ar halitta akan LV winding da HV winding plus tank na sarrafan.Idan kowane dabi’a daga cikin wasu biyu ya samu darajar da a yarda da shi, yana nuna cewa zama’ar halitta akan gwaji HV, LV, da tank na sarrafan suna da kyau. Idan wanda daga cikinsu baya yi kyau, dole ne a dawo zama’ar halitta bisa biy12/25/2025 -
Misaloli Masu Amfani Da Turbin Mafi Yawan KirkiyaPrinciples of Design for Pole-Mounted Distribution Transformers(1) Principles of Location and LayoutDakunan mutanen da yawan karkashin hanyar abokan tsawon tushen musta da suka shiga zama na gari ko kuma abokan karkashin da suka fi sani, da ta yi amfani da rukunin "yarjejenye, abubuwa daban-daban" don in ba da sauransu da kuma inganci. Don abokan karkashin gida, za a iya samun tushen uku a cikin wurare da ke da damar da kuma hukumar da ke soke.(2) Zabbar Tushen Uku a Tsawon MustaAbubuwan da ke d12/25/2025 -
Furfuri na Gidaje na Tashin Transformer Don Iyakoki Da Dama1.Gudaji Gwamnati na Makarfi na Turbin na ZamaStrategiya na Gudaji:Na farko, koyi garka da kula cikin turbin, tana da koyi garka da kula cikin turbin, tana da koyi garka da kula cikin turbin, tana da koyi garka da kula cikin turbin, tana da koyi garka da kula cikin turbin, tana da koyi garka da kula cikin turbin, tana da koyi garka da kula cikin turbin, tana da koyi garka da kula cikin turbin, tana da koyi garka da kula cikin turbin, tana da koyi garka da kula cikin turbin.Na biyu, dace mafi gir12/25/2025
Babu samun mai arliƙi daidai ba? Sai ma'arikin mai arliƙi gane kika.
Samun Kwatanti Yanzu
Aika tambaya
Kwamfuta
Samun IEE Business Application
Yi amfani da IEE-Business app don samun abubuwan aikin, samun halayyin, haɗi da malamai, kuma kai tsauraran takaiddun kasoshin duka lokaci, duka wurin—dole bai karfin takamaltar hulɗin ku na alintakargida da kasuwanci.
