KWJC - 1500 Series High - Current Test Bench - IEE-Business

English
RFQ

Download the app

KWJC - 1500 Series High - Current Test Bench

discuss personally

Model

Basic info Product Detail Supplier

Basic info

Brand	Wone Store
Model NO.	KWJC - 1500 Series High - Current Test Bench
Rated voltage	220V
Rated capacity	5kVA
Series	KWJC - 1500 Series

Product Detail

Overview

The KWJC - 1500 High - Current Test Bench is a new - type verification bench designed and developed by our company in accordance with the GB14048 《Low - voltage Switchgear and Control gear》 standard, the technical standards of relevant products, and users' special requirements.
This verification bench is composed of new - type components such as a voltage regulator, a current booster, a high - precision ammeter, a voltmeter, an AC contactor, buttons, and indicator lights. It can be used by production manufacturers or relevant quality inspection departments to conduct over - current and temperature rise tests on switches for safety assurance.

Parameters

Project		Parameters
Power input	Rated voltage	AC 220V±10% 50Hz
Power input	Power Input	2-phase 3-wire
rated output	Rated capacity	5kVA
	Output current value	0~1500A
	Error	≤1%
	waveform distortion	≤1%
Instrument Accuracy	Ammeter accuracy	Level of 1
Instrument Accuracy	Voltmeter accuracy	Level of 1
Operating temperature		-10℃-45℃
Environmental humidity		20%~80%RH

Know your supplier

Wone Store

Main Categories

High Voltage Electrical Apparatus/Low Voltage Electrical Apparatus/Wire cable/Instrument meters/New energy/Tester/Production equipment/Generator/Electrical fittings/Integrated Electrical Equipment/Instrument Transformer/Equipment Parts

Business Type

Sales

Highest Annual Export (USD)

$300000000

Professional Experience

1 years

Workplace

1000m²

占位

占位

Related Products

Related Knowledges

Automatic Reclosing Scheme in Transmission Systems

Automatic Reclosing Scheme in Transmission Systems

Automatic Reclosing Scheme for Transmission SystemsThe automatic reclosing system is a series-connected network designed to reduce operating costs and enhance network reliability. Extra-high voltage (EHV) transmission lines are used to transmit large amounts of power, on the order of thousands of megawatts (MW), and therefore should not be interrupted at all costs. Although faults on these overhead lines are common, the power transmitted through them should not be interrupted for long periods du

Transformer Bushing Operating Principle

Transformer Bushing Operating Principle

In electrical power systems, a bushing is an insulating device that allows an electrical conductor to pass safely through a grounded conductive barrier, as in the case of transformers or circuit breakers. All transformer windings are connected to high-voltage lines, so special attention must be paid to the terminal connections to prevent flashover between the high-voltage terminals and the transformer body. In low-voltage distribution transformers, cable connections are made within a terminal bo

Working Principle and Introduction of Rectifier Transformers

Working Principle and Introduction of Rectifier Transformers

Working Principle of Rectifier TransformersThe working principle of a rectifier transformer is the same as that of a conventional transformer. A transformer is a device that converts AC voltage based on the principle of electromagnetic induction. Typically, a transformer consists of two electrically isolated windings—the primary and secondary—wound around a common iron core. When the primary winding is connected to an AC power source, the alternating current generates a magnetomotive

Common Faults and Diagnostic Technologies of Oil-immersed Distribution Transformers

Common Faults and Diagnostic Technologies of Oil-immersed Distribution Transformers

1.Common Faults and Diagnostic Measures1.1 Transformer Oil Leakage1.1.1 Oil Leakage from Tank Weld SeamsFor oil leakage at flat joints, direct welding is applicable. For leakage at corners or joints reinforced with stiffeners, the exact leakage point is often difficult to locate, and re-leakage may occur after welding due to internal stress. For such cases, repair welding with an added iron plate is recommended: for two-surface joints, the iron plate can be cut into a spindle shape for welding;

Why Should a Transformer Core be Grounded?

Why Should a Transformer Core be Grounded?

During transformer operation, the core and the metallic structures and components that secure the core and windings are exposed to a strong electric field, inducing a high potential relative to ground. If the core is left ungrounded, a potential difference can develop between the core and grounded parts such as clamps and the tank, leading to intermittent discharges. Additionally, the magnetic field surrounding the windings induces varying electromotive forces (EMF) in different metallic compone

Why do resistors typically have values such as 4.7kΩ or 5.1kΩ instead of round numbers like 5kΩ?

Why do resistors typically have values such as 4.7kΩ or 5.1kΩ instead of round numbers like 5kΩ?

Many beginners in circuit design may find standard resistor values puzzling. Why are common values like 4.7 kΩ or 5.1 kΩ instead of round numbers such as 5 kΩ?The reason lies in the use of an exponential distribution system for resistor values, standardized by the International Electrotechnical Commission (IEC). This system defines a series of preferred values, including the E3, E6, E12, E24, E48, E96, and E192 series.For example:The E6 series uses a ratio of approximately 10^(