IEEE Rear Connector With Surge Arrester
Key attributes
| Brand | Switchgear parts |
| Model NO. | IEEE Rear Connector With Surge Arrester |
| Rated voltage | 24V |
| Rated normal current | 150A |
| Series | RW-MHBLQ |
Product descriptions from the supplier
Summary
IEEE Rear connector with surge arrester can provide reliable over- voltage protection for the electrical system. The external semi conductive Layers of screened type IEC Rear connector with surge arrester to ensure protect the operators when installation and maintenance,and also ensure the equipments in safety.At the same time, its anti ultraviolet, anti-aging, waterproof, moisture-proof unique properties to ensure that the product in a harsh environment safe and reliable operation. Multi adaptability to medium and high voltage scenarios such as 15-35kV, medium and high voltage ring main unit (RMU), gas insulated switchgear (GIS)
Item |
HBLQ-17/45 |
HBLQ-17/50 |
HBLQ-26/66 |
HBLQ-34/90 |
System rated voltage |
15kV |
15kV |
20kV |
20kV |
System rated voltage of surge arrester |
17kV |
17kV |
26kV |
34kV |
Continuous operation voltage |
13.6kV |
13.6kV |
20.8kV |
27.2kV |
Reference voltage (1mA DC) |
≥24kV |
≥25kV |
≥37kV |
≥50kV |
Leakage current at 0.75 U1mA |
≤50μA |
≤50μA |
≤50μA |
≤50μA |
Steep current impulse residual voltage |
≤51.8kV |
≤57.5kV |
≤76kV |
≤104kV |
Lightning impulse residual voltage |
≤45kV |
≤50kV |
≤66kV |
≤90kV |
Switching impulse residual voltage |
≤35kV |
≤42.5kV |
≤56kV |
≤80kV |
Long duration current impulse withstand at 2000μs |
150A |
150A |
150A |
150A |
Note: When Selection,Please indicate the lightning impulse residual voltage value.
Related Products
Related Knowledges
-
High Voltage Bushing Selection Standards for Power transformer1. Structure Forms and Classification of BushingsThe structure forms and classification of bushings are shown in the table below: Serial No. Classification Feature Category 1 Main insulation structure Capacitive Type Resin-impregnated paperOil-impregnated paper Non-capacitive Type Gas insulationLiquid insulationCasting resinComposite insulation 2 External Insulation Material PorcelainSilicone Rubber 3 Filling Material Between Capacitor Core and Exte12/20/2025 -
Large Power Transformer Installation & Handling Procedures Guide1. Mechanical Direct Towing of Large Power TransformersWhen large power transformers are transported using mechanical direct towing, the following work shall be properly completed:Investigate the structure, width, gradient, slope, inclination, turning angles, and load-bearing capacity of roads, bridges, culverts, ditches, etc. along the route; reinforce them when necessary.Survey overhead obstacles along the route such as power lines and communication lines.During loading, unloading, and transpo12/20/2025 -
5 Fault Diagnosis Techniques for Large Power TransformersTransformer Fault Diagnosis Methods1. Ratio Method for Dissolved Gas AnalysisFor most oil-immersed power transformers, certain combustible gases are produced in the transformer tank under thermal and electrical stress. The combustible gases dissolved in oil can be used to determine the thermal decomposition characteristics of the transformer oil-paper insulation system based on their specific gas content and ratios. This technology was first used for fault diagnosis in oil-immersed transformers.12/20/2025 -
17 Common Questions About Power Transformers1 Why must the transformer core be grounded?During normal operation of power transformers, the core must have one reliable ground connection. Without grounding, a floating voltage between the core and ground would cause intermittent breakdown discharge. Single-point grounding eliminates the possibility of floating potential in the core. However, when two or more grounding points exist, uneven potentials between core sections create circulating currents between grounding points, causing multi-poi12/20/2025 -
Intelligent Grounding Transformers for Island Grid Support1. Project BackgroundDistributed photovoltaic (PV) and energy storage projects are developing rapidly across Vietnam and Southeast Asia, yet face significant challenges:1.1 Grid Instability:Vietnam's power grid experiences frequent fluctuations (particularly in northern industrial zones). In 2023, coal power shortages triggered large-scale blackouts, resulting in daily losses exceeding USD 5 million. Traditional PV systems lack effective neutral grounding management capabilities, making equipmen12/18/2025 -
Commissioning Test Procedures for Oil-Immersed Power TransformersTransformer Testing Procedures and Requirements1. Non-Porcelain Bushing Tests1.1 Insulation ResistanceSuspend the bushing vertically using a crane or support frame. Measure the insulation resistance between the terminal and the tap/french using a 2500V megohmmeter. The measured values should not significantly deviate from factory values under similar environmental conditions. For capacitive-type bushings rated 66kV and above with tap bushings, measure the insulation resistance between the "small12/17/2025
