DNH9 Fuse Switch Disconnector
Zhejiang Wone IT Service Co., Ltd...
1yrs +
staff 1000+m² US$300000000+
Key attributes
| Brand | Switchgear parts |
| Model NO. | DNH9 Fuse Switch Disconnector |
| Rated normal current | 250A |
| Rated frequency | 50/60Hz |
| Series | DNH9 |
Product descriptions from the supplier
Description
Mainly used in distribution circuits and motor circuits with high short-circuit currents, as power switches, isolation switches, and application switches Emergency switch and used for AC circuit protection. This switch is not suitable for directly opening and closing a single motor;Complies with national standard GB/T 14048.3 and international standard IEC/EN60947-3.
Working conditions
1.The ambient temperature range is -25 ℃~+55 ℃, and the average 24-hour value does not exceed+35 ℃. If the ambient temperature is lower than-25 ℃ or higher than+55 ℃, capacity reduction should be considered for use;
2. Altitude: The installation site has an altitude not exceeding 2000m;
3. When the maximum temperature is+40 ℃, the relative humidity of the air does not exceed 50%. Higher relative humidity can be allowed at lower temperatures, such as up to 90% at+20 ℃. Special measures should be taken for occasional condensation caused by temperature changes;
4. Pollution level: Level 3;
5. Installation category: III, IV;
6. It should be installed in a place without significant shaking, impact vibration, and invasion of rain and snow. At the same time, the installation location should be free of explosive hazardous media, and there should be no gas or dust in the media that is sufficient to corrode metals and damage insulation;
7. The switch should not bear additional mechanical stress, and external cables and busbars should be fixed through insulators, etc. Note: For special usage environments, please consult with the manufacturer.
1.The ambient temperature range is -25 ℃~+55 ℃, and the average 24-hour value does not exceed+35 ℃. If the ambient temperature is lower than-25 ℃ or higher than+55 ℃, capacity reduction should be considered for use;
2. Altitude: The installation site has an altitude not exceeding 2000m;
3. When the maximum temperature is+40 ℃, the relative humidity of the air does not exceed 50%. Higher relative humidity can be allowed at lower temperatures, such as up to 90% at+20 ℃. Special measures should be taken for occasional condensation caused by temperature changes;
4. Pollution level: Level 3;
5. Installation category: III, IV;
6. It should be installed in a place without significant shaking, impact vibration, and invasion of rain and snow. At the same time, the installation location should be free of explosive hazardous media, and there should be no gas or dust in the media that is sufficient to corrode metals and damage insulation;
7. The switch should not bear additional mechanical stress, and external cables and busbars should be fixed through insulators, etc. Note: For special usage environments, please consult with the manufacturer.
Parameters
| Specifications | Unit | DNH9-160 | DNH9-250 | ||
|---|---|---|---|---|---|
| Rated working voltage Ue | V | 230V AC | 415V AC | 1000V DC | 690V AC |
| Rated working current Ie | A | 160 | 160 | 250 | 250 |
| Agreed heating current Ith | V | 160 | 160 | 250 | 250 |
| Rated limited short-circuit current (with fused core) | kA | 100 | 100 | 30 | 100 |
| Usage category (with fused core) | AC-23B | AC-23B | DC-21B | AC-23B | |
| Rated insulation voltage Ui | V | 1000 | 1000 | 1000 | 1000 |
| Rated impulse withstand voltage Uimp | kV | 12 | 12 | 12 | 12 |
| Rated frequency | Hz | 50/60 | 50/60 | 50/60 | 50/60 |
| Electrical lifespan (number of cycles of operation) | times | 200 | 200 | 200 | 200 |
| Maximum torque | N.m | 30 | 30 | 30 | 30 |
| Executive standard: IEC60269-2/GB/T 13539.2 | 1 | 1 | 1 | 1 | |
| Rated working current In | A | 160 | 160 | 250 | 200 |
| Power consumption Pn | W | 23 | 23 | ≤ 32 | ≤ 32 |
| Surrounding air temperature | -5°C ~ + 40°C | -5°C ~ + 40°C | -5°C ~ + 40°C | -5°C ~ + 40°C | |
| Altitude | ≤ 2000m | ≤ 2000m | ≤ 2000m | ≤ 2000m | |
| Installation category and pollution level | III、IV | III、IV | III、IV | III、IV | |
| Transportation and storage | -25°C ~ + 55°C | -25°C ~ + 55°C | -25°C ~ + 55°C | -25°C ~ + 55°C |
MV Switchgear Accessories
Zhejiang Wone IT Service Co., Ltd...
1yrs +
staff 1000+m² US$300000000+
Online store
On-time delivery rate
Response time
100.0%
≤4h
Company overview
Workplace: 1000m²
Total staff:
Highest Annual Export(usD): 300000000
Services
Business Type: Sales
Main Categories: Electrical fittings/Equipment Parts/Low Voltage Electrical Apparatus
Whole life care manager
Full lifecycle management services for equipment procurement, use, maintenance, and after-sales,
ensuring safe operation of electrical equipment, continuous control, and worry-free electricity
consumption.
The equipment supplier has passed platform qualification certification and technical evaluation,
ensuring compliance, professionalism, and reliability from the source.
Related Products
Related Knowledges
-
Strange Devices on Transmission Lines: 5 Little-Known Practical Functions（1）1 Aviation Warning SpheresAviation warning spheres, also known as reflective safety spheres, are used on overhead transmission lines near airports, especially on extra-high-voltage (above 220kV) lines and river-crossing transmission lines. Highly visible aviation marker spheres (aviation warning spheres) must be installed along the lines to provide warning signals.The aviation marker sphere (aviation warning sphere) has a diameter of ф=600mm. The sphere can be manufactured in various bright coloLeon09/04/2025 -
Transmission LineIn transmission lines, a "π" connection involves breaking the original line from Substation A to Substation B and inserting Substation C, forming a "π" configuration. After the "π" connection, the original single line is divided into two independent transmission lines. Following the "π" connection, Substations B and C may both be powered by Substation A (in this case, Substation C receives power via a feeder from Substation B's busbar, or possibly from another voltage point within Substation B);Encyclopedia09/04/2025 -
What are the principles of forced re-energization of transmission lines?Principles of Forced Re-energization of Transmission LinesRegulations for Forced Re-energization of Transmission Lines Correctly select the forced re-energization end of the line. If necessary, change the connection configuration before forced re-energization, taking into account the reduction of short-circuit capacity and its impact on grid stability. There must be a transformer with its neutral point directly grounded on the busbar at the forced re-energization end. Pay attention to the impactEdwiin09/04/2025 -
Analysis of Accident Handling in Transmission LinesAnalysis of Transmission Line Fault HandlingAs a fundamental component of the power grid, transmission lines are widely distributed and numerous, often exposed to diverse geographical and climatic conditions, making them highly susceptible to faults. Common causes include overvoltage, pollution flashover, insulation damage, tree encroachment, and external damage. Line tripping is one of the most frequent faults in power plant and substation operations, with fault types including single-phase-to-Leon09/04/2025 -
The difference between transmission and distribution linesTransmission lines and distribution lines are both used to carry electrical power from one location to another. However, they differ significantly in key aspects such as primary function, voltage levels, phase configuration, and conductor placement. These differences are essential for understanding their distinct roles in the power system.The Difference Between Transmission and Distribution Line is given below in the tabulated form.Electricity generation is a critical component of the power systEdwiin09/04/2025 -
Ensuring Reliability: A Deep Dive into Transformer MaintenanceIntroductionElectric transformers are the backbone of modern power distribution systems, silently enabling the reliable delivery of electricity to homes, businesses, and industries. As these critical assets age and the demand for uninterrupted power grows, the importance of diligent transformer maintenance has never been greater. This essay explores the essential role of transformer maintenance, highlighting the value of proactive care, the impact of advanced diagnostic technologies, and the traVziman09/03/2025
Related Solutions
Haven't found the right supplier yet? Let matching verified suppliers find you.
Get Quotation Now
