Serye ng HD(HS) na Pampalit na Switch na may Buka at Switch na may Paggaling na Uri ng Kutsilyo
Mga Pangunahing Katangian
| Brand | Switchgear parts |
| Numero ng Modelo | Serye ng HD(HS) na Pampalit na Switch na may Buka at Switch na may Paggaling na Uri ng Kutsilyo |
| Tensyon na Naka-ugali | AC 400V/AC 690V |
| Rated Current | 100-3000A |
| bilang ng mga pole | 3P,4P |
| Serye | HD(HS) |
Mga Deskripsyon ng Produkto mula sa Supplier
Ang serye HD at HS ng Knife Blade Switch, ang mga bukas na knife switch at knife shaped transfer switches (na maaaring tawagin bilang mga switch) ay applicable sa complete sets of power distribution devices na may AC 50Hz, rated voltage hanggang AC690V at rated current hanggang 3000A. Ginagamit ito para sa infrequent manual connection at disconnection ng AC circuits o bilang isolation switches.
Ang central handle type switch ay pangunahing ginagamit sa power station, na hindi nagtatanggal ng circuit na may kasalukuyan at ginagamit bilang isolating switch.Knife Blade Switch
Ang central lever operating mechanism switch ay pangunahing ginagamit sa switchgear na may front operation at rear maintenance, at ang operating mechanism ay naka-install sa harap.Knife Blade Switch
Ang side at front lever operated mechanism switch ay pangunahing ginagamit sa switch cabinet para sa side at front operation at front maintenance. Ang operating mechanism ay maaaring i-install sa parehong gilid ng cabinet.Knife Blade Switch
Ang switch na may arc extinguishing chamber ay maaaring magtakda ng kasalukuyang load, at iba pang serye ng knife switches ay ginagamit lamang bilang disconnectors.Knife Blade Switch
Ang produktong ito ay sumasang-ayon sa IEC60947-3 GB14048.3 standard.
Ang temperatura ng hangin sa paligid ay hindi mas mataas kaysa +40 ℃ at hindi mas mababa kaysa -5 ℃.Knife Blade Switch
Ang altitude ng lugar ng pag-install ay hindi dapat lampa sa 2000m.Knife Blade Switch
Humidity: kapag ang pinakamataas na temperatura ay +40 ℃, ang relative humidity ng hangin ay hindi lampa sa 50%. Sa mas mababang temperatura, maaaring payagan ang mas mataas na relative humidity, tulad ng 90% sa 20 ℃. Dapat isagawa ang mga corresponding measures para sa occasional condensation dahil sa pagbabago ng temperatura.Knife Blade Switch
Ang pollution level ng paligid na kapaligiran ay level 3.Knife Blade Switch
Dapat i-install ang switch sa lugar na walang malubhang shaking, shock vibration at rain and snow invasion. Sa parehong oras, ang lugar ng pag-install ay dapat walang explosive dangerous media, at ang media ay dapat walang gas at dust na sapat na makakorosyon ng metal at makakasira ng insulation.Knife Blade Switch
Knife Blade Switch Main technical parameters
| Agreed heating current (A) |
100 |
200 | 400 | 600 | 1000 | 1500 | 2000 |
3000 |
| Rated working voltage (V) |
400 / 690 |
400 / 690 | 400 / 690 | 400 / 690 | 400 / 690 | 400 / 690 | 400 |
400 |
| Rated working current (A) |
100 |
200 | 400 | 600 | 1000 | 1500 | 2000 |
3000 |
| Rated insulation voltage (V) |
1000 |
1000 | 1000 | 1000 | 1000 | 1000 | 690 |
690 |
| Mechanical life (Times) |
10000 |
8000 | 8000 | 5000 | 5000 | 5000 | 3000 |
3000 |
| Electric life (Times) |
1000 |
1000 | 1000 | 500 | 500 | 500 | 300 |
300 |
| 1s short-time withstand current (kA) |
10 |
10 | 15 | 20 | 25 | 35 | 40 |
40 |
| Operating force (N) |
≤ 300 |
≤300 | ≤400 | ≤400 | ≤450 | ≤450 | ≤450 |
≤450 |
Pangkalahatang disenyo at sukat ng pag-install ng Knife Blade Switch (mm)
|
Processing mode of base plate: molding (resin board, glass board) |
||||||||||||||
|
Specification and model |
Overall dimension |
Installation dimension |
||||||||||||
|
|
A | B | E | F | H | h | J | K | O | P | M | Φ | C |
D |
|
HD11-100/38 |
140 | 190 | 50 | 160 | 200 | 100 | 110 | / | / | / | 8 | 7 | 50 |
140 |
|
HD11-100/48 |
190 | 190 | 50 | 160 | 200 | 100 | 110 | / | / | / | 8 | 7 | 50 |
140 |
|
HD11-200/38 |
200 | 200 | 70 | 160 | 210 | 110 | 110 | / | / | / | 8 | 7 | 70 |
140 |
|
HD11-200/48 |
270 | 210 | 70 | 160 | 220 | 115 | 110 | / | / | / | 8 | 7 | 140 |
140 |
|
HD11-400/38 |
210 | 260 | 80 | 210 | 260 | 126 | 146 | / | / | / | 12 | 7 | 80 |
190 |
|
HD11-400/48 |
300 | 270 | 80 | 210 | 270 | 130 | 146 | / | / | / | 12 | 7 | 160 |
190 |
|
HD11-600/38 |
270 | 332 | 100 | 272 | 300 | 133 | 239 | 40 | / | / | 16 | 9 | 100 |
140 |
|
HD11-1000/38 |
310 | 352 | 120 | 292 | 338 | 146 | 208 | 50 | 26 | 26 | 2-12 | 9 | 120 |
140 |
|
HD11-1500/38 |
340 | 384 | 130 | 324 | 370 | 160 | 228 | 70 | 35 | 35 | 4-12 | 9 | 130 |
140 |
Switch na may Buntot ng Kutsilyo
|
Processing mode of base plate: Machining (rubber plate, epoxy plate) |
||||||||||||||
|
Specification and model |
Overall dimension |
Installation dimension |
||||||||||||
|
A |
B | E | F | H | h | J | K | O | P | M | Φ | C |
D |
|
|
HD11-100/38 |
140 | 190 | 50 | 160 | 200 | 100 | 110 | / | / | / | 8 | 7 | 50 |
140 |
|
HD11-100/48 |
192 | 190 | 50 | 160 | 200 | 100 | 110 | / | / | / | 8 | 7 | 50 |
140 |
|
HD11-200/38 |
200 | 200 | 70 | 160 | 210 | 110 | 110 | / | / | / | 8 | 7 | 70 |
140 |
|
HD11-200/48 |
270 | 210 | 70 | 160 | 220 | 115 | 110 | / | / | / | 8 | 7 | 140 |
140 |
| HD11-400/38 |
210 |
260 | 80 | 210 | 260 | 126 | 146 | / | / | / | 12 | 7 | 80 |
190 |
| HD11-400/48 |
300 |
270 | 80 | 210 | 270 | 130 | 146 | / | / | / | 12 | 7 | 160 |
190 |
| HD11-600/38 |
270 |
332 | 100 | 272 | 300 | 133 | 239 | 40 | / | / | 16 | 9 | 100 |
140 |
| HD11-600/48 |
340 |
332 | 90 | 272 | 300 | 133 | 239 | 440 | / | / | 16 | 9 | 180 |
140 |
| HD11-1000/38 |
322 |
352 | 115 | 292 | 338 | 146 | 208 | 50 | 26 | 26 | 2-12 | 9 | 115 |
140 |
|
HD11-1000/48 |
440 | 352 | 115 | 292 | 338 | 146 | 208 | 50 | 26 | 26 | 2-12 | 9 | 230 |
140 |
| HD11-1500/38 |
360 |
384 | 130 | 324 | 370 | 160 | 224 | 70 | 35 | 35 | 4-12 | 9 | 130 |
140 |
| HD11-1500/48 |
490 |
384 | 130 | 324 | 370 | 160 | 224 | 70 | 35 | 35 | 4-12 | 9 | 260 |
140 |
| HD11-2000/38 |
500 |
420 | 180 | 324 | 340 | 148 | 210 | 97 | 40 | 55 | 4-12 | 9 | 180 |
140 |
| HD11-2000/48 |
680 |
420 | 180 | 324 | 340 | 148 | 210 | 97 | 40 | 55 | 4-12 | 9 | 360 |
140 |
| HD11-3000/38 |
600 |
450 | 200 | 374 | 372 | 162 | 230 | 117 | 45 | 68 | 4-16 | 9 | 200 |
140 |
| HD11-3000/48 |
790 |
450 | 200 | 374 | 372 | 162 | 230 | 117 | 45 | 68 | 4-16 | 9 | 400 |
140 |
Paltik na Switch ng Blade
|
Processing mode of base plate: Machining (rubber plate, epoxy plate) |
|||||||||||||||
|
Specification and model |
Overall dimension |
Installation dimension |
|||||||||||||
|
A |
B | E | F | H | h | I | J | K | O | P | M | Φ | C |
D |
|
| HD11-200/39 |
190 |
215 | 70 | 190 | 210 | 110 | 26 | 60 | / | / | / | 8 | 7 | 70 |
160 |
| HD11-200/49 |
260 |
225 | 70 | 190 | 220 | 115 | 26 | 60 | / | / | / | 8 | 7 | 140 |
160 |
| HD11-400/39 |
210 |
262 | 80 | 215 | 260 | 126 | 29 | 70 | / | / | / | 12 | 7 | 80 |
190 |
| HD11-400/49 |
300 |
272 | 80 | 215 | 270 | 130 | 29 | 70 | / | / | / | 12 | 7 | 160 | 190 |
| HD11-600/39 |
260 |
332 | 100 | 260 | 300 | 133 | 37 | 140 | 40 | / | / | 16 | 9 | 100 | 220 |
| HD11-600/49 |
360 |
332 | 100 | 260 | 300 | 133 | 37 | 140 | 40 | / | / | 16 | 9 | 200 |
220 |
| HD11-1000/39 |
330 |
352 | 120 | 290 | 338 | 146 | 23 | 160 | 50 | 26 | 26 | 2-12 | 9 | 120 |
260 |
| HD11-1000/49 |
450 |
352 | 120 | 290 | 338 | 146 | 23 | 160 | 50 | 26 | 26 | 2-12 | 9 | 240 |
260 |
| HD11-1500/39 |
380 |
384 | 130 | 340 | 370 | 160 | 23 | 180 | 70 | 35 | 35 | 4-12 | 9 | 130 |
300 |
| HD11-1500/49 |
510 |
384 | 130 | 340 | 370 | 160 | 23 | 180 | 70 | 35 | 35 | 4-12 | 9 | 260 |
300 |
| HD11-2000/39 |
500 |
420 | 180 | 300 | 340 | 148 | 44 | 180 | 97 | 40 | 55 | 4-12 | 9 | 180 |
260 |
| HD11-2000/49 |
689 |
420 | 180 | 300 | 340 | 148 | 44 | 180 | 97 | 40 | 55 | 4-12 | 9 | 360 |
260 |
| HD11-3000/39 |
600 |
450 | 200 | 350 | 372 | 162 | 40 | 190 | 117 | 45 | 68 | 4-16 | 9 | 200 |
300 |
| HD11-3000/49 |
790 |
450 | 200 | 350 | 372 | 162 | 40 | 190 | 117 | 45 | 68 | 4-16 | 9 | 400 |
300 |
Pamutot na Switch
|
Processing mode of base plate: Machining (rubber plate, epoxy plate) |
||||||||||||||||
|
Specification and model |
Overall dimension |
Installation dimension |
||||||||||||||
|
A |
B | E | F | H | h | J | K | I | N | O | P | M | Φ | C |
D |
|
| HS11-200/38 |
190 |
320 | 70 | 220 | 220 | 85 | 170 | 20 | 26 | / | / | / | 8 | 7 | 70 |
220 |
| HS11-200/48 |
265 |
360 | 70 | 220 | 240 | 82 | 170 | 20 | 26 | / | / | / | 8 | 7 | 140 |
220 |
| HS11-400/38 |
220 |
425 | 80 | 312 | 290 | 105 | 243 | 30 | 29 | / | / | / | 12 | 7 | 80 |
280 |
| HS11-400/48 |
290 |
440 | 80 | 312 | 300 | 100 | 243 | 30 | 29 | / | / | / | 12 | 7 | 160 |
280 |
| HS11-600/38 |
270 |
455 | 100 | 250 | 300 | 90 | 319 | 40 | 37 | 30 | / | / | 16 | 9 | 100 |
220 |
| HS11-600/48 |
340 |
455 | 90 | 250 | 300 | 90 | 319 | 40 | 37 | 30 | / | / | 16 | 9 | 180 |
200 |
| HS11-1000/38 |
325 |
520 | 120 | 250 | 340 | 110 | 297 | 50 | 23 | 40 | 26 | 26 | 2-12 | 9 | 120 |
220 |
| HS11-1000/48 |
450 |
520 | 120 | 250 | 340 | 110 | 297 | 50 | 23 | 40 | 26 | 26 | 2-12 | 9 | 240 |
220 |
| HS11-1500/38 |
360 |
552 | 130 | 300 | 360 | 120 | 354 | 70 | 23 | 46 | 35 | 35 | 4-12 | 9 | 130 |
260 |
| HS11-1500/48 |
490 |
552 | 130 | 300 | 360 | 120 | 354 | 70 | 23 | 46 | 35 | 35 | 4-12 | 9 | 260 |
260 |
Switch na may Buntot na Panga
|
Processing mode of base plate: Machining (rubber plate, epoxy plate) |
||||||||||||||||
|
Specification and model |
Overall dimension | Installation dimension | ||||||||||||||
|
A |
B | E | F | H | h | J | K | I | N | O | P | M | Φ | C |
D |
|
| HS11-200/39 |
190 |
320 | 70 | 245 | 220 | 85 | 120 | 20 | 26 | / | / | / | 8 | 7 | 70 |
220 |
| HS11-200/49 |
265 |
360 | 70 | 245 | 240 | 82 | 170 | 20 | 26 | / | / | / | 8 | 7 | 140 |
220 |
| HS11-400/39 |
220 |
425 | 80 | 285 | 290 | 105 | 140 | 30 | 29 | / | / | / | 12 | 7 | 80 |
260 |
| HS11-400/49 |
200 |
440 | 80 | 285 | 300 | 100 | 140 | 30 | 29 | / | / | / | 12 | 7 | 160 |
260 |
| HS11-600/39 |
270 |
455 | 100 | 340 | 300 | 90 | 220 | 40 | 37 | 30 | / | / | 16 | 9 | 100 |
300 |
| HS11-600/49 |
340 |
455 | 90 | 340 | 300 | 90 | 220 | 40 | 37 | 30 | / | / | 16 | 9 | 180 |
300 |
| HS11-1000/39 |
330 |
520 | 120 | 390 | 340 | 110 | 250 | 50 | 23 | 40 | 26 | 26 | 2-12 | 9 | 120 |
350 |
| HS11-1000/49 |
450 |
520 | 120 | 390 | 340 | 110 | 250 | 50 | 23 | 40 | 26 | 26 | 2-12 | 9 | 240 |
350 |
| HS11-1500/39 |
380 |
552 | 130 | 440 | 360 | 120 | 285 | 70 | 23 | 46 | 35 | 35 | 4-12 | 9 | 130 | 410 |
| HS11-1500/49 |
510 |
552 | 130 | 440 | 360 | 120 | 285 | 70 | 23 | 46 | 35 | 35 | 4-12 | 9 | 260 |
410 |
Pampalit ng Buntot ng Kutsilyo
|
Specification and model |
Overall dimension |
Installation dimension |
|||||||||||||
|
A |
B | E | G | H | R | L | J | K | O | P | M | Φ | C |
D |
|
| HD12-200/31 |
280 |
200 | 80 | 40 | 80 | 175 | 75 | 130 | / | / | / | 8 | 7 | 80 |
160 |
| HD12-400/31 |
310 |
210 | 90 | 30 | 90 | 175 | 75 | 166 | / | / | / | 12 | 7 | 90 |
160 |
| HD12-600/31 |
330 |
292 | 100 | 30 | 95 | 175 | 80 | 259 | 40 | / | / | 16 | 9 | 100 |
160 |
| HD12-1000/31 |
400 |
322 | 120 | 30 | 110 | 230 | 80 | 238 | 50 | 26 | 26 | 2-12 | 9 | 120 |
160 |
| HD12-1500/31 |
440 |
354 | 130 | 30 | 110 | 230 | 80 | 254 | 70 | 35 | 35 | 4-12 | 9 | 130 |
160 |
| HD12-1500/30 |
440 |
354 | 130 | 30 | 110 | 230 | 80 | 254 | 70 | 35 | 35 | 4-12 | 9 | 130 |
160 |
Switch na may Buntot ng Kutsilyo
|
Specification and model |
Overall dimension |
Installation dimension |
||||||||||||||
|
A |
B | E | H | R | L | N | J | I | K | O | P | M | Φ | C |
D |
|
| HS12-200/31 |
280 |
280 | 80 | 80 | 175 | 75 | / | 210 | 26 | / | / | / | 8 | 7 | 80 |
240 |
| HS12-400/31 |
310 |
300 | 90 | 90 | 175 | 65 | / | 256 | 29 | / | / | / | 12 | 7 | 90 |
240 |
| HS12-600/31 |
330 |
392 | 100 | 95 | 175 | 68 | 30 | 359 | 37 | 40 | / | / | 16 | 9 | 100 |
240 |
| HS12-1000/31 |
400 |
442 | 120 | 110 | 230 | 62 | 40 | 358 | 23 | 50 | 26 | 26 | 2-12 | 9 | 120 |
240 |
| HS12-1500/31 |
440 |
484 | 130 | 110 | 230 | 73 | 46 | 384 | 23 | 70 | 35 | 35 | 4-12 | 9 | 130 |
280 |
| HS12-1500/30 |
440 |
484 | 130 | 110 | 230 | 73 | 46 | 384 | 23 | 70 | 35 | 35 | 4-12 | 9 | 130 |
280 |
Pamutot na Switch
|
Processing mode of base plate: molding (resin board, glass board) |
|||||||||||||||||
| Specification and model | Overall dimension | Installation dimension |
Handle opening size |
||||||||||||||
|
A |
B | E | H | G | R | J | K | L | O | P | M | Φ | C | D | S |
T |
|
| HD13-200/31 |
210 |
180 | 80 | 160 | 245~
265 |
175 | 130 | / | 75 | / | / | 8 | 7 | 80 | 160 | 100 |
146 |
| HD13-400/31 |
240 |
206 | 90 | 180 | 245~
265 |
170 | 166 | / | 75 | / | / | 12 | 7 | 90 | 160 | 100 |
146 |
| HD13-600/31 |
260 |
292 | 100 | 185 | 245~
265 |
175 | 259 | 40 | 80 | / | / | 16 | 9 | 100 | 160 | 100 |
146 |
| HD13-1000/31 |
313 |
322 | 120 | 230 | 245~
265 |
230 | 238 | 50 | 80 | 26 | 26 | 2-12 | 9 | 120 | 160 | 100 |
146 |
| HD13-1500/31 |
350 |
354 | 130 | 235 | 245~
265 |
230 | 254 | 70 | 80 | 35 | 35 | 4-12 | 9 | 130 | 160 | 100 |
146 |
| HD13-1500/30 |
338 |
354 | 130 | 235 | 245~
265 |
230 | 254 | 70 | 80 | 35 | 35 | 4-12 | 9 | 130 | 160 | 100 |
146 |
Pamutot ng Kutsilyo
|
Processing mode of base plate: Machining (rubber plate, epoxy plate) |
|||||||||||||||||
| Specification and model | Overall dimension | Installation dimension |
Handle opening size |
||||||||||||||
|
A |
B | E | H | G | R | J | K | L | O | P | M | Φ | C | D | S |
T |
|
| HD13-200/31 |
210 |
192 | 80 | 160 | 245~
265 |
175 | 130 | / | 75 | / | / | 8 | 7 | 80 | 160 | 100 |
146 |
| HD13-200/41 |
290 |
190 | 80 | 160 | 245~
265 |
175 | 130 | / | 75 | / | / | 8 | 7 | 160 | 160 | 100 |
146 |
| HD13-400/31 |
242 |
206 | 90 | 180 | 245~
265 |
175 | 166 | / | 75 | / | / | 12 | 7 | 90 | 160 | 100 |
146 |
| HD13-400/41 |
330 |
210 | 90 | 180 | 245~
265 |
175 | 166 | / | 75 | / | / | 12 | 7 | 180 | 160 | 100 |
146 |
| HD13-600/31 |
270 |
292 | 100 | 185 | 245~
265 |
175 | 259 | 40 | 80 | / | / | 16 | 9 | 100 | 160 | 100 |
146 |
| HD13-600/41 |
370 |
292 | 100 | 185 | 245~
265 |
175 | 259 | 40 | 80 | / | / | 16 | 9 | 200 | 160 | 100 |
146 |
| HD13-1000/31 |
325 |
322 | 120 | 230 | 245~
265 |
230 | 238 | 50 | 80 | 26 | 26 | 2-12 | 9 | 120 | 160 | 100 |
146 |
| HD13-1000/41 |
450 |
322 | 120 | 230 | 245~
265 |
230 | 238 | 50 | 80 | 26 | 26 | 2-12 | 9 | 240 | 160 | 100 |
146 |
| HD13-1500/31 |
360 |
354 | 130 | 235 | 245~
265 |
230 | 254 | 70 | 80 | 35 | 35 | 4-12 | 9 | 130 | 160 | 100 |
146 |
| HD13-1500/41 |
490 |
354 | 130 | 235 | 245~
265 |
230 | 254 | 70 | 80 | 35 | 35 | 4-12 | 9 | 260 | 160 | 100 |
146 |
| HD13-1500/30 |
360 |
354 | 130 | 235 | 245~
265 |
230 | 254 | 70 | 80 | 35 | 35 | 4-12 | 9 | 130 | 160 | 100 |
146 |
| HD13-1500/40 |
490 |
354 | 130 | 235 | 245~
265 |
230 | 254 | 70 | 80 | 35 | 35 | 4-12 | 9 | 260 | 160 | 100 |
146 |
| HD13-2000/30 |
500 |
354 | 180 | 230 | 265~
285 |
280 | 240 | 97 | 80 | 40 | 55 | 4-12 | 9 | 180 | 160 | 130 |
170 |
| HD13-2000/40 |
680 |
354 | 180 | 230 | 265~
285 |
280 | 240 | 97 | 80 | 40 | 55 | 4-12 | 9 | 360 | 160 | 130 |
170 |
| HD13-2000/31 |
550 |
322 | 180 | 230 | 265~
285 |
280 | 238 | 2-50 | 80 | 26 | 26 | 4-12 | 9 | 180 | 160 | 130 |
170 |
| HD13-2000/41 |
730 |
322 | 180 | 230 | 265~
285 |
280 | 238 | 2-50 | 80 | 26 | 26 | 4-12 | 9 | 360 | 160 | 130 |
170 |
| HD13-3000/30 |
600 |
404 | 200 | 235 | 265~
285 |
280 | 251 | 117 | 80 | 45 | 68 | 4-16 | 9 | 200 | 160 | 130 |
170 |
| HD13-3000/40 |
790 |
404 | 200 | 235 | 265~
285 |
280 | 251 | 117 | 80 | 45 | 68 | 4-16 | 9 | 400 | 160 | 130 |
170 |
| HD13-3000/31 |
720 |
354 | 230 | 235 | 265~
285 |
280 | 254 | 2-70 | 80 | 35 | 35 | 4-12 | 9 | 230 | 160 | 130 | 170 |
| HD13-3000/41 |
920 |
354 | 230 | 235 | 265~
285 |
280 | 254 | 2-70 | 80 | 35 | 35 | 4-12 | 9 | 460 | 160 | 130 | 170 |
Pampalakas na Switch na Buntot ng Kutsilyo
|
Processing mode of base plate: molding (resin board, glass board) |
|||||||||||||||
| Specification and model | Overall dimension |
Installation dimension |
|||||||||||||
|
A |
B | E | H | G | R | J | K | L | O | P | M | Φ | C |
D |
|
| HD13BX-200/31 |
210 |
180 | 80 | 160 | 215~
235 |
330 | 130 | / | 130 | / | / | 8 | 7 | 80 |
160 |
| HD13BX-400/31 |
240 |
206 | 90 | 180 | 215~
235 |
330 | 166 | / | 125 | / | / | 12 | 7 | 90 |
160 |
| HD13BX-600/31 |
260 |
292 | 100 | 185 | 215~
235 |
330 | 259 | 40 | 133 | / | / | 16 | 9 | 100 |
160 |
| HD13BX-1000/31 |
313 |
322 | 120 | 230 | 225~
245 |
330 | 238 | 50 | 137 | 26 | 26 | 2-12 | 9 | 120 |
160 |
| HD13BX-1500/31 |
350 |
354 | 130 | 235 | 225~
245 |
330 | 254 | 70 | 133 | 35 | 35 | 4-12 | 9 | 130 |
160 |
| HD13BX-1500/30 |
338 |
354 | 130 | 235 | 225~
245 |
330 | 254 | 70 | 133 | 35 | 35 | 4-12 | 9 | 130 | 160 |
|
Processing mode of base plate: Machining (rubber plate, epoxy plate) |
|||||||||||||||
| Specification and model | Overall dimension |
Installation dimension |
|||||||||||||
|
A |
B | E | H | G | R | J | K | L | O | P | M | Φ | C |
D |
|
| HD13BX-200/31 |
210 |
192 | 80 | 160 | 215~
235 |
330 | 130 | / | 130 | / | / | 8 | 7 | 80 |
160 |
| HD13BX-200/41 |
290 |
190 | 80 | 160 | 215~
235 |
330 | 130 | / | 75 | / | / | 8 | 7 | 160 |
160 |
| HD13BX-400/31 |
242 |
206 | 90 | 180 | 215~
235 |
330 | 166 | / | 125 | / | / | 12 | 7 | 90 |
160 |
| HD13BX-400/41 |
330 |
210 | 90 | 180 | 215~
235 |
330 | 166 | / | 125 | / | / | 12 | 7 | 180 |
160 |
| HD13BX-600/31 |
270 |
292 | 100 | 185 | 215~
235 |
330 | 259 | 40 | 133 | / | / | 16 | 9 | 100 |
160 |
| HD13BX-600/41 |
370 |
292 | 100 | 185 | 215~
235 |
330 | 259 | 40 | 133 | / | / | 16 | 9 | 200 |
160 |
| HD13BX-1000/31 |
325 |
322 | 120 | 230 | 225~
245 |
330 | 238 | 50 | 137 | 26 | 26 | 2-12 | 9 | 120 |
160 |
| HD13BX-1000/41 |
450 |
322 | 120 | 230 | 225~
245 |
330 | 238 | 50 | 137 | 26 | 26 | 2-12 | 9 | 240 |
160 |
| HD13BX-1500/31 |
360 |
354 | 130 | 235 | 225~
245 |
330 | 254 | 70 | 133 | 35 | 35 | 4-12 | 9 | 130 |
160 |
| HD13BX-1500/41 |
490 |
354 | 130 | 235 | 225~
245 |
330 | 254 | 70 | 133 | 35 | 35 | 4-12 | 9 | 260 |
160 |
| HD13BX-1500/30 |
360 |
354 | 130 | 235 | 225~
245 |
330 | 254 | 70 | 133 | 35 | 35 | 4-12 | 9 | 130 |
160 |
| HD13BX-1500/40 |
490 |
354 | 130 | 235 | 225~
245 |
330 | 254 | 70 | 133 | 35 | 35 | 4-12 | 9 | 260 |
160 |
| HD13BX-2000/30 |
500 |
354 | 180 | 230 | 245~
265 |
330 | 240 | 97 | 137 | 40 | 55 | 4-12 | 9 | 180 |
160 |
| HD13BX-2000/40 |
680 |
354 | 180 | 230 | 245~
265 |
330 | 240 | 97 | 137 | 40 | 55 | 4-12 | 9 | 360 |
160 |
| HD13BX-2000/31 |
550 |
322 | 180 | 230 | 245~
265 |
330 | 238 | 2-50 | 137 | 26 | 26 | 4-12 | 9 | 180 | 160 |
| HD13BX-2000/41 |
730 |
322 | 180 | 230 | 245~
265 |
330 | 238 | 2-50 | 137 | 26 | 26 | 4-12 | 9 | 360 | 160 |
| HD13BX-3000/30 |
600 |
404 | 200 | 235 | 245~
265 |
330 | 251 | 117 | 133 | 45 | 68 | 4-16 | 9 | 200 | 160 |
| HD13BX-3000/40 |
790 |
404 | 200 | 235 | 245~
265 |
330 | 251 | 117 | 133 | 45 | 68 | 4-16 | 9 | 400 |
160 |
| HD13BX-3000/31 |
720 |
354 | 230 | 235 | 245~
265 |
330 | 254 | 2-70 | 133 | 35 | 35 | 4-12 | 9 | 230 | 160 |
| HD13BX-3000/41 |
920 |
354 | 230 | 235 | 245~
265 |
330 | 254 | 2-70 | 133 | 35 | 35 | 4-12 | 9 | 460 | 160 |
Tindahan Online
Rate ng on-time delivery
Oras ng Pagsagot
100.0%
≤4h
Pangkalahatang Impormasyon ng Kompanya
Lugar ng Trabaho: 1000m²
Kabuuang bilang ng mga empleyado:
Pinakamataas na Taunang Export (US Dollar): 300000000
Serbisyo
Uri ng Pagnenegosyo: Sales
Pangunahing Kategorya: Mga Aksesorya ng Pagsasakatawan/Pagsusuri ng mga aparato/Mataas na Voltaheng mga Aparato/Mga aparato sa mababang voltaje/Instrumentasyon/Mga Pagsasagawa ng Produksyon/Pangkalahatang Paggamit ng Enerhiya sa Pagproseso ng IEE-Business
Pamamahala ng Buhay
Mga serbisyo sa pangangalaga at pamamahala sa buong buhay para sa pagbili, paggamit, pagpapanatili, at售后 ng kagamitan, upang masiguro ang ligtas na operasyon ng mga kagamitang pangkuryente, tuluy-tuloy na kontrol, at maaliwalas na pagkonsumo ng kuryente.
Ang supplier ng kagamitan ay nakapasa sa sertipikasyon ng karapatang pumasok sa platform at teknikal na pagtatasa, tinitiyak ang pagtugon, propesyonalismo, at katiyakan mula pa sa pinagmulan.
