HD(HS) serie open meschakelaar en mesoverschakelaar
Belangrijke kenmerken
| Merk | Switchgear parts |
| Modelnummer | HD(HS) serie open meschakelaar en mesoverschakelaar |
| Nominale spanning | AC 400V/AC 690V |
| Nominale stroom | 100-3000A |
| aantal polen | 3P,4P |
| Serie | HD(HS) |
Productbeschrijvingen van de leverancier
Meschermessen HD-reeks en HS-reeks open meschermessen en mesvormige overschakelaars (hierna aangeduid als schakelaars) zijn toepasbaar voor volledige stroomverdelingsinstallaties met wisselspanning van 50Hz, een nominale spanning tot AC690V en een nominale stroom tot 3000A. Ze worden gebruikt voor het zeldzame handmatige aansluiten en ontkoppelen van wisselstromen of als isolatieschakelaars.
De centrale hefboomtype schakelaar wordt voornamelijk gebruikt in de elektriciteitscentrale, die geen circuit met stroom doorsnijdt en wordt gebruikt als isolatieschakelaar.Meschermessen
De centrale hefboombedieningsschakelaar wordt voornamelijk gebruikt in schakelkasten met bediening aan de voorkant en onderhoud aan de achterkant, en de bedieningseenheid is geïnstalleerd aan de voorkant.Meschermessen
De zij- en fronthefboombedieningsschakelaar wordt voornamelijk gebruikt in schakelkasten voor zij- en frontbediening en frontonderhoud. De bedieningseenheid kan aan beide zijden van de kast worden geïnstalleerd.Meschermessen
De schakelaar uitgerust met boogverdelingskamer kan belastingstroom doorsnijden, terwijl andere reeksen meschermessen alleen als disconectoren worden gebruikt.Meschermessen
Dit product voldoet aan IEC60947-3 GB14048.3 standaard.
De omgevingstemperatuur is niet hoger dan +40 ℃ en niet lager dan -5 ℃.Meschermessen
De hoogte van de installatieplaats mag niet hoger zijn dan 2000m.Meschermessen
Luchtvochtigheid: bij een maximale temperatuur van +40 ℃ mag de relatieve luchtvochtigheid niet hoger zijn dan 50%. Bij lagere temperaturen kan een hogere relatieve luchtvochtigheid worden toegestaan, zoals 90% bij 20 ℃. Er moeten passende maatregelen worden genomen voor de incidentele condensatie door temperatuurveranderingen.Meschermessen
Het vervuilingniveau van de omgeving is niveau 3.Meschermessen
De schakelaar moet op een plaats zonder significante trilling, schokken en invallen van regen en sneeuw worden geïnstalleerd. Tegelijkertijd moet de installatieplaats vrij zijn van explosieve gevaarlijke media, en mogen de media geen gas en stof bevatten die voldoende zijn om metaal te verroesten en isolatie te beschadigen.Meschermessen
Meschermessen Hoofdtechnische parameters
| Agreed heating current (A) |
100 |
200 | 400 | 600 | 1000 | 1500 | 2000 |
3000 |
| Rated working voltage (V) |
400 / 690 |
400 / 690 | 400 / 690 | 400 / 690 | 400 / 690 | 400 / 690 | 400 |
400 |
| Rated working current (A) |
100 |
200 | 400 | 600 | 1000 | 1500 | 2000 |
3000 |
| Rated insulation voltage (V) |
1000 |
1000 | 1000 | 1000 | 1000 | 1000 | 690 |
690 |
| Mechanical life (Times) |
10000 |
8000 | 8000 | 5000 | 5000 | 5000 | 3000 |
3000 |
| Electric life (Times) |
1000 |
1000 | 1000 | 500 | 500 | 500 | 300 |
300 |
| 1s short-time withstand current (kA) |
10 |
10 | 15 | 20 | 25 | 35 | 40 |
40 |
| Operating force (N) |
≤ 300 |
≤300 | ≤400 | ≤400 | ≤450 | ≤450 | ≤450 |
≤450 |
Omtrek en installatiedimensies van mescontactschakelaar (mm)
|
Processing mode of base plate: molding (resin board, glass board) |
||||||||||||||
|
Specification and model |
Overall dimension |
Installation dimension |
||||||||||||
|
|
A | B | E | F | H | h | J | K | O | P | M | Φ | C |
D |
|
HD11-100/38 |
140 | 190 | 50 | 160 | 200 | 100 | 110 | / | / | / | 8 | 7 | 50 |
140 |
|
HD11-100/48 |
190 | 190 | 50 | 160 | 200 | 100 | 110 | / | / | / | 8 | 7 | 50 |
140 |
|
HD11-200/38 |
200 | 200 | 70 | 160 | 210 | 110 | 110 | / | / | / | 8 | 7 | 70 |
140 |
|
HD11-200/48 |
270 | 210 | 70 | 160 | 220 | 115 | 110 | / | / | / | 8 | 7 | 140 |
140 |
|
HD11-400/38 |
210 | 260 | 80 | 210 | 260 | 126 | 146 | / | / | / | 12 | 7 | 80 |
190 |
|
HD11-400/48 |
300 | 270 | 80 | 210 | 270 | 130 | 146 | / | / | / | 12 | 7 | 160 |
190 |
|
HD11-600/38 |
270 | 332 | 100 | 272 | 300 | 133 | 239 | 40 | / | / | 16 | 9 | 100 |
140 |
|
HD11-1000/38 |
310 | 352 | 120 | 292 | 338 | 146 | 208 | 50 | 26 | 26 | 2-12 | 9 | 120 |
140 |
|
HD11-1500/38 |
340 | 384 | 130 | 324 | 370 | 160 | 228 | 70 | 35 | 35 | 4-12 | 9 | 130 |
140 |
Mesknoppen schakelaar
|
Processing mode of base plate: Machining (rubber plate, epoxy plate) |
||||||||||||||
|
Specification and model |
Overall dimension |
Installation dimension |
||||||||||||
|
A |
B | E | F | H | h | J | K | O | P | M | Φ | C |
D |
|
|
HD11-100/38 |
140 | 190 | 50 | 160 | 200 | 100 | 110 | / | / | / | 8 | 7 | 50 |
140 |
|
HD11-100/48 |
192 | 190 | 50 | 160 | 200 | 100 | 110 | / | / | / | 8 | 7 | 50 |
140 |
|
HD11-200/38 |
200 | 200 | 70 | 160 | 210 | 110 | 110 | / | / | / | 8 | 7 | 70 |
140 |
|
HD11-200/48 |
270 | 210 | 70 | 160 | 220 | 115 | 110 | / | / | / | 8 | 7 | 140 |
140 |
| HD11-400/38 |
210 |
260 | 80 | 210 | 260 | 126 | 146 | / | / | / | 12 | 7 | 80 |
190 |
| HD11-400/48 |
300 |
270 | 80 | 210 | 270 | 130 | 146 | / | / | / | 12 | 7 | 160 |
190 |
| HD11-600/38 |
270 |
332 | 100 | 272 | 300 | 133 | 239 | 40 | / | / | 16 | 9 | 100 |
140 |
| HD11-600/48 |
340 |
332 | 90 | 272 | 300 | 133 | 239 | 440 | / | / | 16 | 9 | 180 |
140 |
| HD11-1000/38 |
322 |
352 | 115 | 292 | 338 | 146 | 208 | 50 | 26 | 26 | 2-12 | 9 | 115 |
140 |
|
HD11-1000/48 |
440 | 352 | 115 | 292 | 338 | 146 | 208 | 50 | 26 | 26 | 2-12 | 9 | 230 |
140 |
| HD11-1500/38 |
360 |
384 | 130 | 324 | 370 | 160 | 224 | 70 | 35 | 35 | 4-12 | 9 | 130 |
140 |
| HD11-1500/48 |
490 |
384 | 130 | 324 | 370 | 160 | 224 | 70 | 35 | 35 | 4-12 | 9 | 260 |
140 |
| HD11-2000/38 |
500 |
420 | 180 | 324 | 340 | 148 | 210 | 97 | 40 | 55 | 4-12 | 9 | 180 |
140 |
| HD11-2000/48 |
680 |
420 | 180 | 324 | 340 | 148 | 210 | 97 | 40 | 55 | 4-12 | 9 | 360 |
140 |
| HD11-3000/38 |
600 |
450 | 200 | 374 | 372 | 162 | 230 | 117 | 45 | 68 | 4-16 | 9 | 200 |
140 |
| HD11-3000/48 |
790 |
450 | 200 | 374 | 372 | 162 | 230 | 117 | 45 | 68 | 4-16 | 9 | 400 |
140 |
Mesknop
|
Processing mode of base plate: Machining (rubber plate, epoxy plate) |
|||||||||||||||
|
Specification and model |
Overall dimension |
Installation dimension |
|||||||||||||
|
A |
B | E | F | H | h | I | J | K | O | P | M | Φ | C |
D |
|
| HD11-200/39 |
190 |
215 | 70 | 190 | 210 | 110 | 26 | 60 | / | / | / | 8 | 7 | 70 |
160 |
| HD11-200/49 |
260 |
225 | 70 | 190 | 220 | 115 | 26 | 60 | / | / | / | 8 | 7 | 140 |
160 |
| HD11-400/39 |
210 |
262 | 80 | 215 | 260 | 126 | 29 | 70 | / | / | / | 12 | 7 | 80 |
190 |
| HD11-400/49 |
300 |
272 | 80 | 215 | 270 | 130 | 29 | 70 | / | / | / | 12 | 7 | 160 | 190 |
| HD11-600/39 |
260 |
332 | 100 | 260 | 300 | 133 | 37 | 140 | 40 | / | / | 16 | 9 | 100 | 220 |
| HD11-600/49 |
360 |
332 | 100 | 260 | 300 | 133 | 37 | 140 | 40 | / | / | 16 | 9 | 200 |
220 |
| HD11-1000/39 |
330 |
352 | 120 | 290 | 338 | 146 | 23 | 160 | 50 | 26 | 26 | 2-12 | 9 | 120 |
260 |
| HD11-1000/49 |
450 |
352 | 120 | 290 | 338 | 146 | 23 | 160 | 50 | 26 | 26 | 2-12 | 9 | 240 |
260 |
| HD11-1500/39 |
380 |
384 | 130 | 340 | 370 | 160 | 23 | 180 | 70 | 35 | 35 | 4-12 | 9 | 130 |
300 |
| HD11-1500/49 |
510 |
384 | 130 | 340 | 370 | 160 | 23 | 180 | 70 | 35 | 35 | 4-12 | 9 | 260 |
300 |
| HD11-2000/39 |
500 |
420 | 180 | 300 | 340 | 148 | 44 | 180 | 97 | 40 | 55 | 4-12 | 9 | 180 |
260 |
| HD11-2000/49 |
689 |
420 | 180 | 300 | 340 | 148 | 44 | 180 | 97 | 40 | 55 | 4-12 | 9 | 360 |
260 |
| HD11-3000/39 |
600 |
450 | 200 | 350 | 372 | 162 | 40 | 190 | 117 | 45 | 68 | 4-16 | 9 | 200 |
300 |
| HD11-3000/49 |
790 |
450 | 200 | 350 | 372 | 162 | 40 | 190 | 117 | 45 | 68 | 4-16 | 9 | 400 |
300 |
Mesknop
|
Processing mode of base plate: Machining (rubber plate, epoxy plate) |
||||||||||||||||
|
Specification and model |
Overall dimension |
Installation dimension |
||||||||||||||
|
A |
B | E | F | H | h | J | K | I | N | O | P | M | Φ | C |
D |
|
| HS11-200/38 |
190 |
320 | 70 | 220 | 220 | 85 | 170 | 20 | 26 | / | / | / | 8 | 7 | 70 |
220 |
| HS11-200/48 |
265 |
360 | 70 | 220 | 240 | 82 | 170 | 20 | 26 | / | / | / | 8 | 7 | 140 |
220 |
| HS11-400/38 |
220 |
425 | 80 | 312 | 290 | 105 | 243 | 30 | 29 | / | / | / | 12 | 7 | 80 |
280 |
| HS11-400/48 |
290 |
440 | 80 | 312 | 300 | 100 | 243 | 30 | 29 | / | / | / | 12 | 7 | 160 |
280 |
| HS11-600/38 |
270 |
455 | 100 | 250 | 300 | 90 | 319 | 40 | 37 | 30 | / | / | 16 | 9 | 100 |
220 |
| HS11-600/48 |
340 |
455 | 90 | 250 | 300 | 90 | 319 | 40 | 37 | 30 | / | / | 16 | 9 | 180 |
200 |
| HS11-1000/38 |
325 |
520 | 120 | 250 | 340 | 110 | 297 | 50 | 23 | 40 | 26 | 26 | 2-12 | 9 | 120 |
220 |
| HS11-1000/48 |
450 |
520 | 120 | 250 | 340 | 110 | 297 | 50 | 23 | 40 | 26 | 26 | 2-12 | 9 | 240 |
220 |
| HS11-1500/38 |
360 |
552 | 130 | 300 | 360 | 120 | 354 | 70 | 23 | 46 | 35 | 35 | 4-12 | 9 | 130 |
260 |
| HS11-1500/48 |
490 |
552 | 130 | 300 | 360 | 120 | 354 | 70 | 23 | 46 | 35 | 35 | 4-12 | 9 | 260 |
260 |
Mesknop
|
Processing mode of base plate: Machining (rubber plate, epoxy plate) |
||||||||||||||||
|
Specification and model |
Overall dimension | Installation dimension | ||||||||||||||
|
A |
B | E | F | H | h | J | K | I | N | O | P | M | Φ | C |
D |
|
| HS11-200/39 |
190 |
320 | 70 | 245 | 220 | 85 | 120 | 20 | 26 | / | / | / | 8 | 7 | 70 |
220 |
| HS11-200/49 |
265 |
360 | 70 | 245 | 240 | 82 | 170 | 20 | 26 | / | / | / | 8 | 7 | 140 |
220 |
| HS11-400/39 |
220 |
425 | 80 | 285 | 290 | 105 | 140 | 30 | 29 | / | / | / | 12 | 7 | 80 |
260 |
| HS11-400/49 |
200 |
440 | 80 | 285 | 300 | 100 | 140 | 30 | 29 | / | / | / | 12 | 7 | 160 |
260 |
| HS11-600/39 |
270 |
455 | 100 | 340 | 300 | 90 | 220 | 40 | 37 | 30 | / | / | 16 | 9 | 100 |
300 |
| HS11-600/49 |
340 |
455 | 90 | 340 | 300 | 90 | 220 | 40 | 37 | 30 | / | / | 16 | 9 | 180 |
300 |
| HS11-1000/39 |
330 |
520 | 120 | 390 | 340 | 110 | 250 | 50 | 23 | 40 | 26 | 26 | 2-12 | 9 | 120 |
350 |
| HS11-1000/49 |
450 |
520 | 120 | 390 | 340 | 110 | 250 | 50 | 23 | 40 | 26 | 26 | 2-12 | 9 | 240 |
350 |
| HS11-1500/39 |
380 |
552 | 130 | 440 | 360 | 120 | 285 | 70 | 23 | 46 | 35 | 35 | 4-12 | 9 | 130 | 410 |
| HS11-1500/49 |
510 |
552 | 130 | 440 | 360 | 120 | 285 | 70 | 23 | 46 | 35 | 35 | 4-12 | 9 | 260 |
410 |
Meschaal
|
Specification and model |
Overall dimension |
Installation dimension |
|||||||||||||
|
A |
B | E | G | H | R | L | J | K | O | P | M | Φ | C |
D |
|
| HD12-200/31 |
280 |
200 | 80 | 40 | 80 | 175 | 75 | 130 | / | / | / | 8 | 7 | 80 |
160 |
| HD12-400/31 |
310 |
210 | 90 | 30 | 90 | 175 | 75 | 166 | / | / | / | 12 | 7 | 90 |
160 |
| HD12-600/31 |
330 |
292 | 100 | 30 | 95 | 175 | 80 | 259 | 40 | / | / | 16 | 9 | 100 |
160 |
| HD12-1000/31 |
400 |
322 | 120 | 30 | 110 | 230 | 80 | 238 | 50 | 26 | 26 | 2-12 | 9 | 120 |
160 |
| HD12-1500/31 |
440 |
354 | 130 | 30 | 110 | 230 | 80 | 254 | 70 | 35 | 35 | 4-12 | 9 | 130 |
160 |
| HD12-1500/30 |
440 |
354 | 130 | 30 | 110 | 230 | 80 | 254 | 70 | 35 | 35 | 4-12 | 9 | 130 |
160 |
Meschakelaarschakelaar
|
Specification and model |
Overall dimension |
Installation dimension |
||||||||||||||
|
A |
B | E | H | R | L | N | J | I | K | O | P | M | Φ | C |
D |
|
| HS12-200/31 |
280 |
280 | 80 | 80 | 175 | 75 | / | 210 | 26 | / | / | / | 8 | 7 | 80 |
240 |
| HS12-400/31 |
310 |
300 | 90 | 90 | 175 | 65 | / | 256 | 29 | / | / | / | 12 | 7 | 90 |
240 |
| HS12-600/31 |
330 |
392 | 100 | 95 | 175 | 68 | 30 | 359 | 37 | 40 | / | / | 16 | 9 | 100 |
240 |
| HS12-1000/31 |
400 |
442 | 120 | 110 | 230 | 62 | 40 | 358 | 23 | 50 | 26 | 26 | 2-12 | 9 | 120 |
240 |
| HS12-1500/31 |
440 |
484 | 130 | 110 | 230 | 73 | 46 | 384 | 23 | 70 | 35 | 35 | 4-12 | 9 | 130 |
280 |
| HS12-1500/30 |
440 |
484 | 130 | 110 | 230 | 73 | 46 | 384 | 23 | 70 | 35 | 35 | 4-12 | 9 | 130 |
280 |
Messtaakschakelaar
|
Processing mode of base plate: molding (resin board, glass board) |
|||||||||||||||||
| Specification and model | Overall dimension | Installation dimension |
Handle opening size |
||||||||||||||
|
A |
B | E | H | G | R | J | K | L | O | P | M | Φ | C | D | S |
T |
|
| HD13-200/31 |
210 |
180 | 80 | 160 | 245~
265 |
175 | 130 | / | 75 | / | / | 8 | 7 | 80 | 160 | 100 |
146 |
| HD13-400/31 |
240 |
206 | 90 | 180 | 245~
265 |
170 | 166 | / | 75 | / | / | 12 | 7 | 90 | 160 | 100 |
146 |
| HD13-600/31 |
260 |
292 | 100 | 185 | 245~
265 |
175 | 259 | 40 | 80 | / | / | 16 | 9 | 100 | 160 | 100 |
146 |
| HD13-1000/31 |
313 |
322 | 120 | 230 | 245~
265 |
230 | 238 | 50 | 80 | 26 | 26 | 2-12 | 9 | 120 | 160 | 100 |
146 |
| HD13-1500/31 |
350 |
354 | 130 | 235 | 245~
265 |
230 | 254 | 70 | 80 | 35 | 35 | 4-12 | 9 | 130 | 160 | 100 |
146 |
| HD13-1500/30 |
338 |
354 | 130 | 235 | 245~
265 |
230 | 254 | 70 | 80 | 35 | 35 | 4-12 | 9 | 130 | 160 | 100 |
146 |
Meschakelaarschakelaar
|
Processing mode of base plate: Machining (rubber plate, epoxy plate) |
|||||||||||||||||
| Specification and model | Overall dimension | Installation dimension |
Handle opening size |
||||||||||||||
|
A |
B | E | H | G | R | J | K | L | O | P | M | Φ | C | D | S |
T |
|
| HD13-200/31 |
210 |
192 | 80 | 160 | 245~
265 |
175 | 130 | / | 75 | / | / | 8 | 7 | 80 | 160 | 100 |
146 |
| HD13-200/41 |
290 |
190 | 80 | 160 | 245~
265 |
175 | 130 | / | 75 | / | / | 8 | 7 | 160 | 160 | 100 |
146 |
| HD13-400/31 |
242 |
206 | 90 | 180 | 245~
265 |
175 | 166 | / | 75 | / | / | 12 | 7 | 90 | 160 | 100 |
146 |
| HD13-400/41 |
330 |
210 | 90 | 180 | 245~
265 |
175 | 166 | / | 75 | / | / | 12 | 7 | 180 | 160 | 100 |
146 |
| HD13-600/31 |
270 |
292 | 100 | 185 | 245~
265 |
175 | 259 | 40 | 80 | / | / | 16 | 9 | 100 | 160 | 100 |
146 |
| HD13-600/41 |
370 |
292 | 100 | 185 | 245~
265 |
175 | 259 | 40 | 80 | / | / | 16 | 9 | 200 | 160 | 100 |
146 |
| HD13-1000/31 |
325 |
322 | 120 | 230 | 245~
265 |
230 | 238 | 50 | 80 | 26 | 26 | 2-12 | 9 | 120 | 160 | 100 |
146 |
| HD13-1000/41 |
450 |
322 | 120 | 230 | 245~
265 |
230 | 238 | 50 | 80 | 26 | 26 | 2-12 | 9 | 240 | 160 | 100 |
146 |
| HD13-1500/31 |
360 |
354 | 130 | 235 | 245~
265 |
230 | 254 | 70 | 80 | 35 | 35 | 4-12 | 9 | 130 | 160 | 100 |
146 |
| HD13-1500/41 |
490 |
354 | 130 | 235 | 245~
265 |
230 | 254 | 70 | 80 | 35 | 35 | 4-12 | 9 | 260 | 160 | 100 |
146 |
| HD13-1500/30 |
360 |
354 | 130 | 235 | 245~
265 |
230 | 254 | 70 | 80 | 35 | 35 | 4-12 | 9 | 130 | 160 | 100 |
146 |
| HD13-1500/40 |
490 |
354 | 130 | 235 | 245~
265 |
230 | 254 | 70 | 80 | 35 | 35 | 4-12 | 9 | 260 | 160 | 100 |
146 |
| HD13-2000/30 |
500 |
354 | 180 | 230 | 265~
285 |
280 | 240 | 97 | 80 | 40 | 55 | 4-12 | 9 | 180 | 160 | 130 |
170 |
| HD13-2000/40 |
680 |
354 | 180 | 230 | 265~
285 |
280 | 240 | 97 | 80 | 40 | 55 | 4-12 | 9 | 360 | 160 | 130 |
170 |
| HD13-2000/31 |
550 |
322 | 180 | 230 | 265~
285 |
280 | 238 | 2-50 | 80 | 26 | 26 | 4-12 | 9 | 180 | 160 | 130 |
170 |
| HD13-2000/41 |
730 |
322 | 180 | 230 | 265~
285 |
280 | 238 | 2-50 | 80 | 26 | 26 | 4-12 | 9 | 360 | 160 | 130 |
170 |
| HD13-3000/30 |
600 |
404 | 200 | 235 | 265~
285 |
280 | 251 | 117 | 80 | 45 | 68 | 4-16 | 9 | 200 | 160 | 130 |
170 |
| HD13-3000/40 |
790 |
404 | 200 | 235 | 265~
285 |
280 | 251 | 117 | 80 | 45 | 68 | 4-16 | 9 | 400 | 160 | 130 |
170 |
| HD13-3000/31 |
720 |
354 | 230 | 235 | 265~
285 |
280 | 254 | 2-70 | 80 | 35 | 35 | 4-12 | 9 | 230 | 160 | 130 | 170 |
| HD13-3000/41 |
920 |
354 | 230 | 235 | 265~
285 |
280 | 254 | 2-70 | 80 | 35 | 35 | 4-12 | 9 | 460 | 160 | 130 | 170 |
Messnippelaar
|
Processing mode of base plate: molding (resin board, glass board) |
|||||||||||||||
| Specification and model | Overall dimension |
Installation dimension |
|||||||||||||
|
A |
B | E | H | G | R | J | K | L | O | P | M | Φ | C |
D |
|
| HD13BX-200/31 |
210 |
180 | 80 | 160 | 215~
235 |
330 | 130 | / | 130 | / | / | 8 | 7 | 80 |
160 |
| HD13BX-400/31 |
240 |
206 | 90 | 180 | 215~
235 |
330 | 166 | / | 125 | / | / | 12 | 7 | 90 |
160 |
| HD13BX-600/31 |
260 |
292 | 100 | 185 | 215~
235 |
330 | 259 | 40 | 133 | / | / | 16 | 9 | 100 |
160 |
| HD13BX-1000/31 |
313 |
322 | 120 | 230 | 225~
245 |
330 | 238 | 50 | 137 | 26 | 26 | 2-12 | 9 | 120 |
160 |
| HD13BX-1500/31 |
350 |
354 | 130 | 235 | 225~
245 |
330 | 254 | 70 | 133 | 35 | 35 | 4-12 | 9 | 130 |
160 |
| HD13BX-1500/30 |
338 |
354 | 130 | 235 | 225~
245 |
330 | 254 | 70 | 133 | 35 | 35 | 4-12 | 9 | 130 | 160 |
|
Processing mode of base plate: Machining (rubber plate, epoxy plate) |
|||||||||||||||
| Specification and model | Overall dimension |
Installation dimension |
|||||||||||||
|
A |
B | E | H | G | R | J | K | L | O | P | M | Φ | C |
D |
|
| HD13BX-200/31 |
210 |
192 | 80 | 160 | 215~
235 |
330 | 130 | / | 130 | / | / | 8 | 7 | 80 |
160 |
| HD13BX-200/41 |
290 |
190 | 80 | 160 | 215~
235 |
330 | 130 | / | 75 | / | / | 8 | 7 | 160 |
160 |
| HD13BX-400/31 |
242 |
206 | 90 | 180 | 215~
235 |
330 | 166 | / | 125 | / | / | 12 | 7 | 90 |
160 |
| HD13BX-400/41 |
330 |
210 | 90 | 180 | 215~
235 |
330 | 166 | / | 125 | / | / | 12 | 7 | 180 |
160 |
| HD13BX-600/31 |
270 |
292 | 100 | 185 | 215~
235 |
330 | 259 | 40 | 133 | / | / | 16 | 9 | 100 |
160 |
| HD13BX-600/41 |
370 |
292 | 100 | 185 | 215~
235 |
330 | 259 | 40 | 133 | / | / | 16 | 9 | 200 |
160 |
| HD13BX-1000/31 |
325 |
322 | 120 | 230 | 225~
245 |
330 | 238 | 50 | 137 | 26 | 26 | 2-12 | 9 | 120 |
160 |
| HD13BX-1000/41 |
450 |
322 | 120 | 230 | 225~
245 |
330 | 238 | 50 | 137 | 26 | 26 | 2-12 | 9 | 240 |
160 |
| HD13BX-1500/31 |
360 |
354 | 130 | 235 | 225~
245 |
330 | 254 | 70 | 133 | 35 | 35 | 4-12 | 9 | 130 |
160 |
| HD13BX-1500/41 |
490 |
354 | 130 | 235 | 225~
245 |
330 | 254 | 70 | 133 | 35 | 35 | 4-12 | 9 | 260 |
160 |
| HD13BX-1500/30 |
360 |
354 | 130 | 235 | 225~
245 |
330 | 254 | 70 | 133 | 35 | 35 | 4-12 | 9 | 130 |
160 |
| HD13BX-1500/40 |
490 |
354 | 130 | 235 | 225~
245 |
330 | 254 | 70 | 133 | 35 | 35 | 4-12 | 9 | 260 |
160 |
| HD13BX-2000/30 |
500 |
354 | 180 | 230 | 245~
265 |
330 | 240 | 97 | 137 | 40 | 55 | 4-12 | 9 | 180 |
160 |
| HD13BX-2000/40 |
680 |
354 | 180 | 230 | 245~
265 |
330 | 240 | 97 | 137 | 40 | 55 | 4-12 | 9 | 360 |
160 |
| HD13BX-2000/31 |
550 |
322 | 180 | 230 | 245~
265 |
330 | 238 | 2-50 | 137 | 26 | 26 | 4-12 | 9 | 180 | 160 |
| HD13BX-2000/41 |
730 |
322 | 180 | 230 | 245~
265 |
330 | 238 | 2-50 | 137 | 26 | 26 | 4-12 | 9 | 360 | 160 |
| HD13BX-3000/30 |
600 |
404 | 200 | 235 | 245~
265 |
330 | 251 | 117 | 133 | 45 | 68 | 4-16 | 9 | 200 | 160 |
| HD13BX-3000/40 |
790 |
404 | 200 | 235 | 245~
265 |
330 | 251 | 117 | 133 | 45 | 68 | 4-16 | 9 | 400 |
160 |
| HD13BX-3000/31 |
720 |
354 | 230 | 235 | 245~
265 |
330 | 254 | 2-70 | 133 | 35 | 35 | 4-12 | 9 | 230 | 160 |
| HD13BX-3000/41 |
920 |
354 | 230 | 235 | 245~
265 |
330 | 254 | 2-70 | 133 | 35 | 35 | 4-12 | 9 | 460 | 160 |
Online winkel
Punctualiteitsgraad leveringen
Reactietijd
100.0%
≤4h
Bedrijfsprofiel
Werkplek: 1000m²
Totaal aantal werknemers:
Hoogste jaarlijkse export (USD): 300000000
Diensten
Zakelijk type: Verkoop
Hoofdcategorieën: Apparatuuraccessoires/Meetapparatuur/Hoge-spanningsapparatuur/lage-spanningsapparatuur/Meet- en regeltechniek/Productiemiddelen/Elektrische fittingen
Levenslange garantie
Hele levenscyclus zorgdiensten voor aanschaf, gebruik, onderhoud en after-sales van apparatuur, zorgen voor veilige bediening van elektrische apparatuur, continue controle en zorgenloos stroomverbruik
De leverancier van de apparatuur heeft de platformkwalificatiecertificering en technische evaluatie gehaald, wat naleving, professionaliteit en betrouwbaarheid bij de bron waarborgt
