HD(HS) reeks Oop Messnyswael en messvormige oorskakelswael
Sleutelkenmerke
| Handelmerk | Switchgear parts |
| Modelnommer | HD(HS) reeks Oop Messnyswael en messvormige oorskakelswael |
| Gedraaide Spanning | AC 400V/AC 690V |
| Gedraaide stroom | 100-3000A |
| Pole getal | 3P,4P |
| Reeks | HD(HS) |
Produkbeskrywings van die voorsienier
Knife Blade Switch HD reeks en HS reeks oop meskake en mesvormige oorgangskake (hierna verwys as kake) is toepaslik op volledige stelle van kragverspreidingsapparate met wisselstroom 50Hz, 'n spesifieke spanning tot AC690V en 'n spesifieke stroom tot 3000A. Dit word gebruik vir infrekwente handmatige verbind en ontkoppel van wisselstroomkringe of as isolerende kake.
Die sentrale handvat tipe skakelaar word hoofsaaklik in die kragstasie gebruik, wat nie 'n kring met stroom onderbreek nie en gebruik word as 'n isolerende skakelaar.Knife Blade Switch
Die sentrale hefbalk bediening mekanisme skakelaar word hoofsaaklik in die skakelpaneel met voorbediening en agteronderhoud gebruik, en die bedieningsmekanisme is geïnstalleer aan die voorkant.Knife Blade Switch
Die sy- en voorhefbalk bediening mekanisme skakelaar word hoofsaaklik in die skakelkabinet vir sy- en voorbediening en vooronderhoud gebruik. Die bedieningsmekanisme kan aan albei kante van die kabinet geïnstalleer word.Knife Blade Switch
Die skakelaar uitgerus met 'n boogverdelser kan laai-stroom onderbreek, en ander reekse van meskake word slegs as ontkoppelaars gebruik.Knife Blade Switch
Hierdie produk voldoen aan IEC60947-3 GB14048.3 standaard.
Die omgewing lugtemperatuur is nie hoër as +40 ℃ en nie lager as -5 ℃ nie.Knife Blade Switch
Die hoogte van die installasieplek moet nie meer as 2000m wees nie.Knife Blade Switch
Voorsit: wanneer die maksimum temperatuur +40 ℃ is, is die relatiewe voorsit van die lug nie meer as 50% nie. By 'n laer temperatuur kan 'n hoër relatiewe voorsit toegelaat word, soos 90% by 20 ℃. Ooreenkomstige maatreëls moet geneem word vir die af en toe voorkomende kondensasie as gevolg van temperatuurveranderinge.Knife Blade Switch
Die besoedelingvlak van die omringende omgewing is vlak 3.Knife Blade Switch
Die skakelaar moet in 'n plek geïnstalleer word sonder beduidende skok, trilling en reën en sneeuwinval. Tegelykertyd moet die installasieplek vry wees van eksplosief gevaarlike media, en die media moet vry wees van gas en stof wat genoeg is om metaal te korradeer en isolering te beskadig.Knife Blade Switch
Knife Blade Switch Hoof tegniese parameters
| Agreed heating current (A) |
100 |
200 | 400 | 600 | 1000 | 1500 | 2000 |
3000 |
| Rated working voltage (V) |
400 / 690 |
400 / 690 | 400 / 690 | 400 / 690 | 400 / 690 | 400 / 690 | 400 |
400 |
| Rated working current (A) |
100 |
200 | 400 | 600 | 1000 | 1500 | 2000 |
3000 |
| Rated insulation voltage (V) |
1000 |
1000 | 1000 | 1000 | 1000 | 1000 | 690 |
690 |
| Mechanical life (Times) |
10000 |
8000 | 8000 | 5000 | 5000 | 5000 | 3000 |
3000 |
| Electric life (Times) |
1000 |
1000 | 1000 | 500 | 500 | 500 | 300 |
300 |
| 1s short-time withstand current (kA) |
10 |
10 | 15 | 20 | 25 | 35 | 40 |
40 |
| Operating force (N) |
≤ 300 |
≤300 | ≤400 | ≤400 | ≤450 | ≤450 | ≤450 |
≤450 |
Mesbeskrywing en installasiedimensies van mesknopskakelaar (mm)
|
Processing mode of base plate: molding (resin board, glass board) |
||||||||||||||
|
Specification and model |
Overall dimension |
Installation dimension |
||||||||||||
|
|
A | B | E | F | H | h | J | K | O | P | M | Φ | C |
D |
|
HD11-100/38 |
140 | 190 | 50 | 160 | 200 | 100 | 110 | / | / | / | 8 | 7 | 50 |
140 |
|
HD11-100/48 |
190 | 190 | 50 | 160 | 200 | 100 | 110 | / | / | / | 8 | 7 | 50 |
140 |
|
HD11-200/38 |
200 | 200 | 70 | 160 | 210 | 110 | 110 | / | / | / | 8 | 7 | 70 |
140 |
|
HD11-200/48 |
270 | 210 | 70 | 160 | 220 | 115 | 110 | / | / | / | 8 | 7 | 140 |
140 |
|
HD11-400/38 |
210 | 260 | 80 | 210 | 260 | 126 | 146 | / | / | / | 12 | 7 | 80 |
190 |
|
HD11-400/48 |
300 | 270 | 80 | 210 | 270 | 130 | 146 | / | / | / | 12 | 7 | 160 |
190 |
|
HD11-600/38 |
270 | 332 | 100 | 272 | 300 | 133 | 239 | 40 | / | / | 16 | 9 | 100 |
140 |
|
HD11-1000/38 |
310 | 352 | 120 | 292 | 338 | 146 | 208 | 50 | 26 | 26 | 2-12 | 9 | 120 |
140 |
|
HD11-1500/38 |
340 | 384 | 130 | 324 | 370 | 160 | 228 | 70 | 35 | 35 | 4-12 | 9 | 130 |
140 |
Mes seinder
|
Processing mode of base plate: Machining (rubber plate, epoxy plate) |
||||||||||||||
|
Specification and model |
Overall dimension |
Installation dimension |
||||||||||||
|
A |
B | E | F | H | h | J | K | O | P | M | Φ | C |
D |
|
|
HD11-100/38 |
140 | 190 | 50 | 160 | 200 | 100 | 110 | / | / | / | 8 | 7 | 50 |
140 |
|
HD11-100/48 |
192 | 190 | 50 | 160 | 200 | 100 | 110 | / | / | / | 8 | 7 | 50 |
140 |
|
HD11-200/38 |
200 | 200 | 70 | 160 | 210 | 110 | 110 | / | / | / | 8 | 7 | 70 |
140 |
|
HD11-200/48 |
270 | 210 | 70 | 160 | 220 | 115 | 110 | / | / | / | 8 | 7 | 140 |
140 |
| HD11-400/38 |
210 |
260 | 80 | 210 | 260 | 126 | 146 | / | / | / | 12 | 7 | 80 |
190 |
| HD11-400/48 |
300 |
270 | 80 | 210 | 270 | 130 | 146 | / | / | / | 12 | 7 | 160 |
190 |
| HD11-600/38 |
270 |
332 | 100 | 272 | 300 | 133 | 239 | 40 | / | / | 16 | 9 | 100 |
140 |
| HD11-600/48 |
340 |
332 | 90 | 272 | 300 | 133 | 239 | 440 | / | / | 16 | 9 | 180 |
140 |
| HD11-1000/38 |
322 |
352 | 115 | 292 | 338 | 146 | 208 | 50 | 26 | 26 | 2-12 | 9 | 115 |
140 |
|
HD11-1000/48 |
440 | 352 | 115 | 292 | 338 | 146 | 208 | 50 | 26 | 26 | 2-12 | 9 | 230 |
140 |
| HD11-1500/38 |
360 |
384 | 130 | 324 | 370 | 160 | 224 | 70 | 35 | 35 | 4-12 | 9 | 130 |
140 |
| HD11-1500/48 |
490 |
384 | 130 | 324 | 370 | 160 | 224 | 70 | 35 | 35 | 4-12 | 9 | 260 |
140 |
| HD11-2000/38 |
500 |
420 | 180 | 324 | 340 | 148 | 210 | 97 | 40 | 55 | 4-12 | 9 | 180 |
140 |
| HD11-2000/48 |
680 |
420 | 180 | 324 | 340 | 148 | 210 | 97 | 40 | 55 | 4-12 | 9 | 360 |
140 |
| HD11-3000/38 |
600 |
450 | 200 | 374 | 372 | 162 | 230 | 117 | 45 | 68 | 4-16 | 9 | 200 |
140 |
| HD11-3000/48 |
790 |
450 | 200 | 374 | 372 | 162 | 230 | 117 | 45 | 68 | 4-16 | 9 | 400 |
140 |
Mes seilswaai
|
Processing mode of base plate: Machining (rubber plate, epoxy plate) |
|||||||||||||||
|
Specification and model |
Overall dimension |
Installation dimension |
|||||||||||||
|
A |
B | E | F | H | h | I | J | K | O | P | M | Φ | C |
D |
|
| HD11-200/39 |
190 |
215 | 70 | 190 | 210 | 110 | 26 | 60 | / | / | / | 8 | 7 | 70 |
160 |
| HD11-200/49 |
260 |
225 | 70 | 190 | 220 | 115 | 26 | 60 | / | / | / | 8 | 7 | 140 |
160 |
| HD11-400/39 |
210 |
262 | 80 | 215 | 260 | 126 | 29 | 70 | / | / | / | 12 | 7 | 80 |
190 |
| HD11-400/49 |
300 |
272 | 80 | 215 | 270 | 130 | 29 | 70 | / | / | / | 12 | 7 | 160 | 190 |
| HD11-600/39 |
260 |
332 | 100 | 260 | 300 | 133 | 37 | 140 | 40 | / | / | 16 | 9 | 100 | 220 |
| HD11-600/49 |
360 |
332 | 100 | 260 | 300 | 133 | 37 | 140 | 40 | / | / | 16 | 9 | 200 |
220 |
| HD11-1000/39 |
330 |
352 | 120 | 290 | 338 | 146 | 23 | 160 | 50 | 26 | 26 | 2-12 | 9 | 120 |
260 |
| HD11-1000/49 |
450 |
352 | 120 | 290 | 338 | 146 | 23 | 160 | 50 | 26 | 26 | 2-12 | 9 | 240 |
260 |
| HD11-1500/39 |
380 |
384 | 130 | 340 | 370 | 160 | 23 | 180 | 70 | 35 | 35 | 4-12 | 9 | 130 |
300 |
| HD11-1500/49 |
510 |
384 | 130 | 340 | 370 | 160 | 23 | 180 | 70 | 35 | 35 | 4-12 | 9 | 260 |
300 |
| HD11-2000/39 |
500 |
420 | 180 | 300 | 340 | 148 | 44 | 180 | 97 | 40 | 55 | 4-12 | 9 | 180 |
260 |
| HD11-2000/49 |
689 |
420 | 180 | 300 | 340 | 148 | 44 | 180 | 97 | 40 | 55 | 4-12 | 9 | 360 |
260 |
| HD11-3000/39 |
600 |
450 | 200 | 350 | 372 | 162 | 40 | 190 | 117 | 45 | 68 | 4-16 | 9 | 200 |
300 |
| HD11-3000/49 |
790 |
450 | 200 | 350 | 372 | 162 | 40 | 190 | 117 | 45 | 68 | 4-16 | 9 | 400 |
300 |
Mes seënbeklapper
|
Processing mode of base plate: Machining (rubber plate, epoxy plate) |
||||||||||||||||
|
Specification and model |
Overall dimension |
Installation dimension |
||||||||||||||
|
A |
B | E | F | H | h | J | K | I | N | O | P | M | Φ | C |
D |
|
| HS11-200/38 |
190 |
320 | 70 | 220 | 220 | 85 | 170 | 20 | 26 | / | / | / | 8 | 7 | 70 |
220 |
| HS11-200/48 |
265 |
360 | 70 | 220 | 240 | 82 | 170 | 20 | 26 | / | / | / | 8 | 7 | 140 |
220 |
| HS11-400/38 |
220 |
425 | 80 | 312 | 290 | 105 | 243 | 30 | 29 | / | / | / | 12 | 7 | 80 |
280 |
| HS11-400/48 |
290 |
440 | 80 | 312 | 300 | 100 | 243 | 30 | 29 | / | / | / | 12 | 7 | 160 |
280 |
| HS11-600/38 |
270 |
455 | 100 | 250 | 300 | 90 | 319 | 40 | 37 | 30 | / | / | 16 | 9 | 100 |
220 |
| HS11-600/48 |
340 |
455 | 90 | 250 | 300 | 90 | 319 | 40 | 37 | 30 | / | / | 16 | 9 | 180 |
200 |
| HS11-1000/38 |
325 |
520 | 120 | 250 | 340 | 110 | 297 | 50 | 23 | 40 | 26 | 26 | 2-12 | 9 | 120 |
220 |
| HS11-1000/48 |
450 |
520 | 120 | 250 | 340 | 110 | 297 | 50 | 23 | 40 | 26 | 26 | 2-12 | 9 | 240 |
220 |
| HS11-1500/38 |
360 |
552 | 130 | 300 | 360 | 120 | 354 | 70 | 23 | 46 | 35 | 35 | 4-12 | 9 | 130 |
260 |
| HS11-1500/48 |
490 |
552 | 130 | 300 | 360 | 120 | 354 | 70 | 23 | 46 | 35 | 35 | 4-12 | 9 | 260 |
260 |
Mes-swyf skakelaar
|
Processing mode of base plate: Machining (rubber plate, epoxy plate) |
||||||||||||||||
|
Specification and model |
Overall dimension | Installation dimension | ||||||||||||||
|
A |
B | E | F | H | h | J | K | I | N | O | P | M | Φ | C |
D |
|
| HS11-200/39 |
190 |
320 | 70 | 245 | 220 | 85 | 120 | 20 | 26 | / | / | / | 8 | 7 | 70 |
220 |
| HS11-200/49 |
265 |
360 | 70 | 245 | 240 | 82 | 170 | 20 | 26 | / | / | / | 8 | 7 | 140 |
220 |
| HS11-400/39 |
220 |
425 | 80 | 285 | 290 | 105 | 140 | 30 | 29 | / | / | / | 12 | 7 | 80 |
260 |
| HS11-400/49 |
200 |
440 | 80 | 285 | 300 | 100 | 140 | 30 | 29 | / | / | / | 12 | 7 | 160 |
260 |
| HS11-600/39 |
270 |
455 | 100 | 340 | 300 | 90 | 220 | 40 | 37 | 30 | / | / | 16 | 9 | 100 |
300 |
| HS11-600/49 |
340 |
455 | 90 | 340 | 300 | 90 | 220 | 40 | 37 | 30 | / | / | 16 | 9 | 180 |
300 |
| HS11-1000/39 |
330 |
520 | 120 | 390 | 340 | 110 | 250 | 50 | 23 | 40 | 26 | 26 | 2-12 | 9 | 120 |
350 |
| HS11-1000/49 |
450 |
520 | 120 | 390 | 340 | 110 | 250 | 50 | 23 | 40 | 26 | 26 | 2-12 | 9 | 240 |
350 |
| HS11-1500/39 |
380 |
552 | 130 | 440 | 360 | 120 | 285 | 70 | 23 | 46 | 35 | 35 | 4-12 | 9 | 130 | 410 |
| HS11-1500/49 |
510 |
552 | 130 | 440 | 360 | 120 | 285 | 70 | 23 | 46 | 35 | 35 | 4-12 | 9 | 260 |
410 |
Mes Skakel
|
Specification and model |
Overall dimension |
Installation dimension |
|||||||||||||
|
A |
B | E | G | H | R | L | J | K | O | P | M | Φ | C |
D |
|
| HD12-200/31 |
280 |
200 | 80 | 40 | 80 | 175 | 75 | 130 | / | / | / | 8 | 7 | 80 |
160 |
| HD12-400/31 |
310 |
210 | 90 | 30 | 90 | 175 | 75 | 166 | / | / | / | 12 | 7 | 90 |
160 |
| HD12-600/31 |
330 |
292 | 100 | 30 | 95 | 175 | 80 | 259 | 40 | / | / | 16 | 9 | 100 |
160 |
| HD12-1000/31 |
400 |
322 | 120 | 30 | 110 | 230 | 80 | 238 | 50 | 26 | 26 | 2-12 | 9 | 120 |
160 |
| HD12-1500/31 |
440 |
354 | 130 | 30 | 110 | 230 | 80 | 254 | 70 | 35 | 35 | 4-12 | 9 | 130 |
160 |
| HD12-1500/30 |
440 |
354 | 130 | 30 | 110 | 230 | 80 | 254 | 70 | 35 | 35 | 4-12 | 9 | 130 |
160 |
Mes-swyfslaai
|
Specification and model |
Overall dimension |
Installation dimension |
||||||||||||||
|
A |
B | E | H | R | L | N | J | I | K | O | P | M | Φ | C |
D |
|
| HS12-200/31 |
280 |
280 | 80 | 80 | 175 | 75 | / | 210 | 26 | / | / | / | 8 | 7 | 80 |
240 |
| HS12-400/31 |
310 |
300 | 90 | 90 | 175 | 65 | / | 256 | 29 | / | / | / | 12 | 7 | 90 |
240 |
| HS12-600/31 |
330 |
392 | 100 | 95 | 175 | 68 | 30 | 359 | 37 | 40 | / | / | 16 | 9 | 100 |
240 |
| HS12-1000/31 |
400 |
442 | 120 | 110 | 230 | 62 | 40 | 358 | 23 | 50 | 26 | 26 | 2-12 | 9 | 120 |
240 |
| HS12-1500/31 |
440 |
484 | 130 | 110 | 230 | 73 | 46 | 384 | 23 | 70 | 35 | 35 | 4-12 | 9 | 130 |
280 |
| HS12-1500/30 |
440 |
484 | 130 | 110 | 230 | 73 | 46 | 384 | 23 | 70 | 35 | 35 | 4-12 | 9 | 130 |
280 |
Mes seë swaai
|
Processing mode of base plate: molding (resin board, glass board) |
|||||||||||||||||
| Specification and model | Overall dimension | Installation dimension |
Handle opening size |
||||||||||||||
|
A |
B | E | H | G | R | J | K | L | O | P | M | Φ | C | D | S |
T |
|
| HD13-200/31 |
210 |
180 | 80 | 160 | 245~
265 |
175 | 130 | / | 75 | / | / | 8 | 7 | 80 | 160 | 100 |
146 |
| HD13-400/31 |
240 |
206 | 90 | 180 | 245~
265 |
170 | 166 | / | 75 | / | / | 12 | 7 | 90 | 160 | 100 |
146 |
| HD13-600/31 |
260 |
292 | 100 | 185 | 245~
265 |
175 | 259 | 40 | 80 | / | / | 16 | 9 | 100 | 160 | 100 |
146 |
| HD13-1000/31 |
313 |
322 | 120 | 230 | 245~
265 |
230 | 238 | 50 | 80 | 26 | 26 | 2-12 | 9 | 120 | 160 | 100 |
146 |
| HD13-1500/31 |
350 |
354 | 130 | 235 | 245~
265 |
230 | 254 | 70 | 80 | 35 | 35 | 4-12 | 9 | 130 | 160 | 100 |
146 |
| HD13-1500/30 |
338 |
354 | 130 | 235 | 245~
265 |
230 | 254 | 70 | 80 | 35 | 35 | 4-12 | 9 | 130 | 160 | 100 |
146 |
Mesknip
|
Processing mode of base plate: Machining (rubber plate, epoxy plate) |
|||||||||||||||||
| Specification and model | Overall dimension | Installation dimension |
Handle opening size |
||||||||||||||
|
A |
B | E | H | G | R | J | K | L | O | P | M | Φ | C | D | S |
T |
|
| HD13-200/31 |
210 |
192 | 80 | 160 | 245~
265 |
175 | 130 | / | 75 | / | / | 8 | 7 | 80 | 160 | 100 |
146 |
| HD13-200/41 |
290 |
190 | 80 | 160 | 245~
265 |
175 | 130 | / | 75 | / | / | 8 | 7 | 160 | 160 | 100 |
146 |
| HD13-400/31 |
242 |
206 | 90 | 180 | 245~
265 |
175 | 166 | / | 75 | / | / | 12 | 7 | 90 | 160 | 100 |
146 |
| HD13-400/41 |
330 |
210 | 90 | 180 | 245~
265 |
175 | 166 | / | 75 | / | / | 12 | 7 | 180 | 160 | 100 |
146 |
| HD13-600/31 |
270 |
292 | 100 | 185 | 245~
265 |
175 | 259 | 40 | 80 | / | / | 16 | 9 | 100 | 160 | 100 |
146 |
| HD13-600/41 |
370 |
292 | 100 | 185 | 245~
265 |
175 | 259 | 40 | 80 | / | / | 16 | 9 | 200 | 160 | 100 |
146 |
| HD13-1000/31 |
325 |
322 | 120 | 230 | 245~
265 |
230 | 238 | 50 | 80 | 26 | 26 | 2-12 | 9 | 120 | 160 | 100 |
146 |
| HD13-1000/41 |
450 |
322 | 120 | 230 | 245~
265 |
230 | 238 | 50 | 80 | 26 | 26 | 2-12 | 9 | 240 | 160 | 100 |
146 |
| HD13-1500/31 |
360 |
354 | 130 | 235 | 245~
265 |
230 | 254 | 70 | 80 | 35 | 35 | 4-12 | 9 | 130 | 160 | 100 |
146 |
| HD13-1500/41 |
490 |
354 | 130 | 235 | 245~
265 |
230 | 254 | 70 | 80 | 35 | 35 | 4-12 | 9 | 260 | 160 | 100 |
146 |
| HD13-1500/30 |
360 |
354 | 130 | 235 | 245~
265 |
230 | 254 | 70 | 80 | 35 | 35 | 4-12 | 9 | 130 | 160 | 100 |
146 |
| HD13-1500/40 |
490 |
354 | 130 | 235 | 245~
265 |
230 | 254 | 70 | 80 | 35 | 35 | 4-12 | 9 | 260 | 160 | 100 |
146 |
| HD13-2000/30 |
500 |
354 | 180 | 230 | 265~
285 |
280 | 240 | 97 | 80 | 40 | 55 | 4-12 | 9 | 180 | 160 | 130 |
170 |
| HD13-2000/40 |
680 |
354 | 180 | 230 | 265~
285 |
280 | 240 | 97 | 80 | 40 | 55 | 4-12 | 9 | 360 | 160 | 130 |
170 |
| HD13-2000/31 |
550 |
322 | 180 | 230 | 265~
285 |
280 | 238 | 2-50 | 80 | 26 | 26 | 4-12 | 9 | 180 | 160 | 130 |
170 |
| HD13-2000/41 |
730 |
322 | 180 | 230 | 265~
285 |
280 | 238 | 2-50 | 80 | 26 | 26 | 4-12 | 9 | 360 | 160 | 130 |
170 |
| HD13-3000/30 |
600 |
404 | 200 | 235 | 265~
285 |
280 | 251 | 117 | 80 | 45 | 68 | 4-16 | 9 | 200 | 160 | 130 |
170 |
| HD13-3000/40 |
790 |
404 | 200 | 235 | 265~
285 |
280 | 251 | 117 | 80 | 45 | 68 | 4-16 | 9 | 400 | 160 | 130 |
170 |
| HD13-3000/31 |
720 |
354 | 230 | 235 | 265~
285 |
280 | 254 | 2-70 | 80 | 35 | 35 | 4-12 | 9 | 230 | 160 | 130 | 170 |
| HD13-3000/41 |
920 |
354 | 230 | 235 | 265~
285 |
280 | 254 | 2-70 | 80 | 35 | 35 | 4-12 | 9 | 460 | 160 | 130 | 170 |
Mes seilswaai
|
Processing mode of base plate: molding (resin board, glass board) |
|||||||||||||||
| Specification and model | Overall dimension |
Installation dimension |
|||||||||||||
|
A |
B | E | H | G | R | J | K | L | O | P | M | Φ | C |
D |
|
| HD13BX-200/31 |
210 |
180 | 80 | 160 | 215~
235 |
330 | 130 | / | 130 | / | / | 8 | 7 | 80 |
160 |
| HD13BX-400/31 |
240 |
206 | 90 | 180 | 215~
235 |
330 | 166 | / | 125 | / | / | 12 | 7 | 90 |
160 |
| HD13BX-600/31 |
260 |
292 | 100 | 185 | 215~
235 |
330 | 259 | 40 | 133 | / | / | 16 | 9 | 100 |
160 |
| HD13BX-1000/31 |
313 |
322 | 120 | 230 | 225~
245 |
330 | 238 | 50 | 137 | 26 | 26 | 2-12 | 9 | 120 |
160 |
| HD13BX-1500/31 |
350 |
354 | 130 | 235 | 225~
245 |
330 | 254 | 70 | 133 | 35 | 35 | 4-12 | 9 | 130 |
160 |
| HD13BX-1500/30 |
338 |
354 | 130 | 235 | 225~
245 |
330 | 254 | 70 | 133 | 35 | 35 | 4-12 | 9 | 130 | 160 |
|
Processing mode of base plate: Machining (rubber plate, epoxy plate) |
|||||||||||||||
| Specification and model | Overall dimension |
Installation dimension |
|||||||||||||
|
A |
B | E | H | G | R | J | K | L | O | P | M | Φ | C |
D |
|
| HD13BX-200/31 |
210 |
192 | 80 | 160 | 215~
235 |
330 | 130 | / | 130 | / | / | 8 | 7 | 80 |
160 |
| HD13BX-200/41 |
290 |
190 | 80 | 160 | 215~
235 |
330 | 130 | / | 75 | / | / | 8 | 7 | 160 |
160 |
| HD13BX-400/31 |
242 |
206 | 90 | 180 | 215~
235 |
330 | 166 | / | 125 | / | / | 12 | 7 | 90 |
160 |
| HD13BX-400/41 |
330 |
210 | 90 | 180 | 215~
235 |
330 | 166 | / | 125 | / | / | 12 | 7 | 180 |
160 |
| HD13BX-600/31 |
270 |
292 | 100 | 185 | 215~
235 |
330 | 259 | 40 | 133 | / | / | 16 | 9 | 100 |
160 |
| HD13BX-600/41 |
370 |
292 | 100 | 185 | 215~
235 |
330 | 259 | 40 | 133 | / | / | 16 | 9 | 200 |
160 |
| HD13BX-1000/31 |
325 |
322 | 120 | 230 | 225~
245 |
330 | 238 | 50 | 137 | 26 | 26 | 2-12 | 9 | 120 |
160 |
| HD13BX-1000/41 |
450 |
322 | 120 | 230 | 225~
245 |
330 | 238 | 50 | 137 | 26 | 26 | 2-12 | 9 | 240 |
160 |
| HD13BX-1500/31 |
360 |
354 | 130 | 235 | 225~
245 |
330 | 254 | 70 | 133 | 35 | 35 | 4-12 | 9 | 130 |
160 |
| HD13BX-1500/41 |
490 |
354 | 130 | 235 | 225~
245 |
330 | 254 | 70 | 133 | 35 | 35 | 4-12 | 9 | 260 |
160 |
| HD13BX-1500/30 |
360 |
354 | 130 | 235 | 225~
245 |
330 | 254 | 70 | 133 | 35 | 35 | 4-12 | 9 | 130 |
160 |
| HD13BX-1500/40 |
490 |
354 | 130 | 235 | 225~
245 |
330 | 254 | 70 | 133 | 35 | 35 | 4-12 | 9 | 260 |
160 |
| HD13BX-2000/30 |
500 |
354 | 180 | 230 | 245~
265 |
330 | 240 | 97 | 137 | 40 | 55 | 4-12 | 9 | 180 |
160 |
| HD13BX-2000/40 |
680 |
354 | 180 | 230 | 245~
265 |
330 | 240 | 97 | 137 | 40 | 55 | 4-12 | 9 | 360 |
160 |
| HD13BX-2000/31 |
550 |
322 | 180 | 230 | 245~
265 |
330 | 238 | 2-50 | 137 | 26 | 26 | 4-12 | 9 | 180 | 160 |
| HD13BX-2000/41 |
730 |
322 | 180 | 230 | 245~
265 |
330 | 238 | 2-50 | 137 | 26 | 26 | 4-12 | 9 | 360 | 160 |
| HD13BX-3000/30 |
600 |
404 | 200 | 235 | 245~
265 |
330 | 251 | 117 | 133 | 45 | 68 | 4-16 | 9 | 200 | 160 |
| HD13BX-3000/40 |
790 |
404 | 200 | 235 | 245~
265 |
330 | 251 | 117 | 133 | 45 | 68 | 4-16 | 9 | 400 |
160 |
| HD13BX-3000/31 |
720 |
354 | 230 | 235 | 245~
265 |
330 | 254 | 2-70 | 133 | 35 | 35 | 4-12 | 9 | 230 | 160 |
| HD13BX-3000/41 |
920 |
354 | 230 | 235 | 245~
265 |
330 | 254 | 2-70 | 133 | 35 | 35 | 4-12 | 9 | 460 | 160 |
