| Muhimmiya | Switchgear parts |
| Model NO. | Fuska na Tausa na Ikonu Dabi |
| Rated Voltage | 15kV |
| Raitidu kọ̀ọ̀kan | 100/200A |
| Bara da damar gaba | 125kV |
| Siri | RW-10 |
FUSE CUTOUT-ARRESTER Combination units install easily and faster, more economically, take up less space in storage, transit and service. Each combined unit takes up a minimum of space on the crossarm and has a favorable weight distribution for minimal off-center loading. FUSE CUTOUT fitted with surge arrester of HAIVOL brand.
Maaɗanin produkti
Gaskiya na tsarin lafiya da kuma gaskiya na tsarin lafiya
Don insulatorin porlain, yana haɓaka karfin porlain da kayayyakin hardware fiting da cement
pouring, a yi amfani da (por-rok)ANCHORING cement da aka sayarwa ta CGM INC daga
USA. Wannan wata cement ya fi shiga kadan, tana da kaskin kwallon inganci, kashi da kwallon lafiya, kashi da kwallon lafiya
coefficient da kuma gaskiya na tsarin lafiya.
Don insulatorin polymer, an haɓaka kayayyakin hardware fiting da fiberglass rod, matarul housing da sheds manufacture of high-temperature Vulcanized Silicone Rubber, da kuma insulatorin moulded by one piece injection molding. Yana da kyau na kwallon kofin da kuma kyau na kwallon kofin da kuma kyau na kwallon kofin.
Duk abubuwan ferrous parts processed by hot dip galvanized, its zinc coating more than 86u, it has
kyau na kwallon kofin.
Design feature of single vent
Wannan FUSE CUTOUT ta amfani da tsarin maaɗani na single vent, exhaust downwards and outwards when fuse cutout interrput. Prevent the intrusion of rainwater, avoid damage to the upper line by free gas, and this design can improve the interrput capacity.
Kyau na kwallon kofin
Duk abubuwan copper casting part adopts bronze/brass, it has excellent mechanical strength and excellent conductivity. Duk abubuwan contact parts be silver-plated, it adopts convex design on the contact surface, this design can reduce the contact resistance and ensure excellent conductivity. The high-strength memory cooper alloy sheets can ensure contact with lower contact smoothly and without any affecting when fuse drop out. It adopts Arc-shortening copper rod to improve the interrput capacity when shortcircuit fault.
Reliable load breaking capacity
Don Loadbreak type fuse cutout, its arc chamber made of special reinforced nylon
material. It has good mechanical strength, anti-aging and flame retardant. suitable for
use the area like high ultraviolet area, high altitude area, coastal area, etc.
Relevant international executive standards
Duka fuse cutouts we manufacture and test according to the latest international standard
IEC 60282-2:2008 & IEEE Std C37.41-2008 & IEEE Std C37.42-2009.
WARM TIPS
When order, please indicate the detailed information as below listed:
1) Rated voltage and rated current .
2) Minimum creepage distance.
3) The material of insulator.
4) Please indicate whether arc-shortening rod should be fitted with fuse cutout.
5) Please indicate the type of mounting bracket.
Rated voltage(KV) |
Rated current(A) |
Rated interrupting current (KA) |
Lightning impulse withstand voltage to ground (BIL KV) |
Minimum power frequency withstand dry voltage to ground (KV) |
Minimum creepage distance(mm) |
11 - 15 |
100/200 |
12 |
110 |
42 |
220 |
11 - 15 |
100/200 |
12 |
125 |
50 |
320 |
24 - 27 |
100/200 |
12 |
150 |
65 |
470 |
33 - 38 |
100/200 |
8 |
170 |
70 |
660 |
33 - 38 |
100/200 |
8 |
170 |
70 |
720 |
33 - 38 |
100/200 |
8 |
170 |
70 |
900 |
