| Brand | RW Energy |
| Numero ng Modelo | 4.8kWh 5.12kWh Para komersyal na gamit na naka-stack na battery para sa enerhiya |
| Nabuo ng enerhiya | 4.8kWh |
| Kalidad ng Selula | Class B |
| Bilang ng mga Makakasamang Pagsasama ng Mga Unit | 6 sets |
| Serye | S48 |
Baterya ng nakatambak na imbakan ng enerhiya

Nakatatak sa base na may mga roller, kaya mas convenient at mas maganda ang hitsura, may mga RS485/RS232 at CAN communication functions, capable ng pakikipag-ugnayan sa upper computer at inverter, Karaniwang nakatatak sa 2 layer, may series at parallel terminals para sa madaling pagkumpol, Nakapaloob ng switch para kontrolin ang lithium battery, may power display at DC protection circuit breaker, Maaaring i-configure bilang 48V system na may 15 strings o 51.2V system na may 16 strings, Optional na Bluetooth, 4G, at WIFI functions, at isang display screen, Ang default charging current ay 0.5C at ang discharging current ay 1C.
Karunungan
Mataas na energy density.
Nakapaloob ng BMS battery management system, mas mahabang cycle life.
Magandang itsura; Libreng stack combination, madali lang ilagay.
Ang panel ay naglalaman ng iba't ibang interfaces, sumusuporta sa maraming protocols, at ADAPTS sa karamihan ng photovoltaic inverters at energy storage converters.
Maaaring ma-customize ang adjustment management battery charging at discharging strategy.
Modular design, madali maintindihan.
Teknikal na parameter
Pangalan ng produkto |
S48100 |
|
Uri ng baterya |
LiFePO4 3.2V 100AH |
|
Kapasidad ng baterya |
4.8kWh |
5.12kWh |
Rated discharge current |
50A |
50A |
Maximum discharge current |
100A |
100A |
Voltage range |
40.5~54V |
43.2~57.6V |
Standard battery unit voltage |
48V |
51.2V |
Maximum DC charging voltage |
54V |
57.6V |
Maximum charging current |
50A |
50A |
Single Cluster Battery Pack |
15S1P |
16S1P |
Maximum output power |
5KW |
5KW |
Communication interface |
RJ45X2 RS485/232X2 CANX2 |
|
Power battery interface |
BAT+ X2 BAT- X2 |
|
Battery life |
Loop 3000~6000 beses@DOD 80%/25℃/0.5C |
|
Maximum number of parallel machines |
15 |
|
Cooling mode |
Natural cooling |
|
Protection |
Over (under) voltage protection/over current protection/over temperature protection/over discharge protection/short circuit protection |
|
Operating environment |
Temperature: -30~50℃ Humidity: 20~95RH% |
|
Maximum working altitude |
2500m(> 2000m load reduction required) |
|
Fire protection installation |
Heptafluoropropane gas fire extinguishing device |
|
Class of protection |
IP20 |
|
Communication mode |
Default: RS485/RS232/CAN Optional: WiFi/4G/ Bluetooth |
|
NOTE:
Ang A-class cell ay maaaring charge at discharge 6000 beses, at ang B-class cell ay maaaring charge at discharge 3000 beses, at ang default discharge ratio ay 0.5C.
Ang warranty ng Class A cell ay 60 buwan, at ang warranty ng Class B cell ay 30 buwan.
Mga scenario ng aplikasyon
Energy storage battery systems are an important part of modern power grids and renewable energy systems. They can store electrical energy during periods of low power demand and release electrical energy during peak demand periods, thereby balancing grid loads and improving energy utilization efficiency.
Modular design:Stacked energy storage batteries usually adopt modular design. Each module is an independent energy storage unit that can be used alone or in combination with other modules.
Flexible expansion:Users can increase or reduce the number of modules according to actual needs, and easily expand or reduce the capacity of the energy storage system.
Unified control system:The entire energy storage system is managed through a unified control system to ensure coordinated work between various modules.