| Brand | RW Energy |
| Numero sa Modelo | 4.8kWh 5.12kWh Commercial Use Stacked energy storage battery 4.8kWh 5.12kWh Paggamit sa Komersyo Nakatindig na bateriya para sa imbakan ng enerhiya |
| Kapasidad sa Pag-atiman sa Kuryente | 4.8kWh |
| Kalidad sa mga Sel ng Elektrisidad | Class B |
| Kantidad sa Parallel Units | 6 sets |
| Serye | S48 |
Stacked energy storage battery

Ang stacked installation nga may rollers sa base, gisayon ug mas maayo ang pag-install, RS485/RS232 ug CAN communication functions, makakapag-communicate sa upper computer ug inverter, Karaniwan na stacked sa 2 layers, may series ug parallel terminals para sa easy grouping, Equipped with a switch para kontrolon ang lithium battery, may power display ug DC protection circuit breaker, Makakapag-configure as a 48V system with 15 strings o a 51.2V system with 16 strings, Optional Bluetooth, 4G ug WIFI functions, ug a display screen, Ang default charging current mao ang 0.5C ug ang discharging current mao ang 1C.
Peculiarity
High energy density.
Equipped with BMS battery management system, longer cycle life.
Beautiful appearance; Free stack combination, easy to install.
The panel integrates a variety of interfaces, supports multiple protocols, and ADAPTS to most photovoltaic inverters and energy storage converters.
Can be customized adjustment management battery charging and discharging strategy.
Modular design, easy maintenance.
Technical parameter
Product model |
S48100 |
|
Battery type |
LiFePO4 3.2V 100AH |
|
Battery capacity |
4.8kWh |
5.12kWh |
Rated discharge current |
50A |
50A |
Maximum discharge current |
100A |
100A |
Voltage range |
40.5~54V |
43.2~57.6V |
Standard battery unit voltage |
48V |
51.2V |
Maximum DC charging voltage |
54V |
57.6V |
Maximum charging current |
50A |
50A |
Single Cluster Battery Pack |
15S1P |
16S1P |
Maximum output power |
5KW |
5KW |
Communication interface |
RJ45X2 RS485/232X2 CANX2 |
|
Power battery interface |
BAT+ X2 BAT- X2 |
|
Battery life |
Loop 3000~6000 ka beses @DOD 80%/25℃/0.5C |
|
Maximum number of parallel machines |
15 |
|
Cooling mode |
Natural cooling |
|
Protection |
Over (under) voltage protection/over current protection/over temperature protection/over discharge protection/short circuit protection |
|
Operating environment |
Temperature: -30~50℃ Humidity: 20~95RH% |
|
Maximum working altitude |
2500m(> 2000m load reduction required) |
|
Fire protection installation |
Heptafluoropropane gas fire extinguishing device |
|
Class of protection |
IP20 |
|
Communication mode |
Default: RS485/RS232/CAN Optional: WiFi/4G/ Bluetooth |
|
NOTE:
Ang A-class cell mahimo nga mag-charge ug mag-discharge 6000 ka beses, ug ang B-class cell mahimo nga mag-charge ug mag-discharge 3000 ka beses, ug ang default discharge ratio mao ang 0.5C.
Class A cell warranty 60 months, Class B cell warranty 30 months.
Application scenarios
Energy storage battery systems are an important part of modern power grids and renewable energy systems. They can store electrical energy during periods of low power demand and release electrical energy during peak demand periods, thereby balancing grid loads and improving energy utilization efficiency.
Modular design:Stacked energy storage batteries usually adopt modular design. Each module is an independent energy storage unit that can be used alone or in combination with other modules.
Flexible expansion:Users can increase or reduce the number of modules according to actual needs, and easily expand or reduce the capacity of the energy storage system.
Unified control system:The entire energy storage system is managed through a unified control system to ensure coordinated work between various modules.