| Brand | RW Energy |
| Numero ng Modelo | 4.8kWh 5.12kWh Komersyal na Ginagamit na Nakatatakip na bateria para sa imbakan ng enerhiya |
| Nakaririting ng enerhiya | 4.8kWh |
| Kalidad ng Selang | Class B |
| bilang ng mga makina na naka-parallel | 6 sets |
| Serye | S48 |
Nakalatag na battery ng imbakan ng enerhiya

Nakalatag na pag-install sa may mga roller sa base, nagbibigay ng mas madaling at magandang hitsura, RS485/RS232 at CAN communication functions, kaya nito makipag-ugnayan sa upper computer at inverter, Karaniwang nakalatag sa 2 layer, may serye at parallel terminals para sa madaling pagsasama, Nakakamit ng switch upang kontrolin ang lithium battery, may power display at DC protection circuit breaker, Maaaring i-configure bilang 48V system na may 15 strings o 51.2V system na may 16 strings, Opisyal na Bluetooth, 4G at WIFI functions, at isang display screen, Ang default charging current ay 0.5C at ang discharging current ay 1C.
Karunungan
Mataas na energy density.
Naka-equip na BMS battery management system, mas mahabang cycle life.
Maganda ang hitsura; Libreng stack combination, madali ang pag-install.
Ang panel ay naglalaman ng iba't ibang interface, sumusuporta sa maraming protocol, at ADAPTS sa karamihan ng photovoltaic inverters at energy storage converters.
Maaaring ma-customize ang adjustment management battery charging at discharging strategy.
Modular design, madali ang maintenance.
Teknikal na parameter
Modelo ng produkto |
S48100 |
|
Uri ng battery |
LiFePO4 3.2V 100AH |
|
Kapasidad ng battery |
4.8kWh |
5.12kWh |
Rated discharge current |
50A |
50A |
Maximum discharge current |
100A |
100A |
Voltage range |
40.5~54V |
43.2~57.6V |
Standard battery unit voltage |
48V |
51.2V |
Maximum DC charging voltage |
54V |
57.6V |
Maximum charging current |
50A |
50A |
Single Cluster Battery Pack |
15S1P |
16S1P |
Maximum output power |
5KW |
5KW |
Communication interface |
RJ45X2 RS485/232X2 CANX2 |
|
Power battery interface |
BAT+ X2 BAT- X2 |
|
Battery life |
Loop 3000~6000 beses@DOD 80%/25℃/0.5C |
|
Maximum number of parallel machines |
15 |
|
Cooling mode |
Natural cooling |
|
Protection |
Over (under) voltage protection/over current protection/over temperature protection/over discharge protection/short circuit protection |
|
Operating environment |
Temperature: -30~50℃ Humidity: 20~95RH% |
|
Maximum working altitude |
2500m(> 2000m load reduction required) |
|
Fire protection installation |
Heptafluoropropane gas fire extinguishing device |
|
Class of protection |
IP20 |
|
Communication mode |
Default: RS485/RS232/CAN Optional: WiFi/4G/ Bluetooth |
|
PAUNAWA:
Ang A-class cell ay maaaring charge at discharge 6000 beses, at ang B-class cell ay maaaring charge at discharge 3000 beses, at ang default discharge ratio ay 0.5C.
Ang warranty ng A-class cell ay 60 buwan, ang warranty ng B-class cell ay 30 buwan.
Mga scenario ng aplikasyon
Energy storage battery systems are an important part of modern power grids and renewable energy systems. They can store electrical energy during periods of low power demand and release electrical energy during peak demand periods, thereby balancing grid loads and improving energy utilization efficiency.
Modular design:Stacked energy storage batteries usually adopt modular design. Each module is an independent energy storage unit that can be used alone or in combination with other modules.
Flexible expansion:Users can increase or reduce the number of modules according to actual needs, and easily expand or reduce the capacity of the energy storage system.
Unified control system:The entire energy storage system is managed through a unified control system to ensure coordinated work between various modules.