3.6kV 7.2kV 12kV 24kV indoor metal-clad withdrawable switchgear - IEE-Business

English
RFQ

Download the app

3.6kV 7.2kV 12kV 24kV indoor metal-clad withdrawable switchgear

discuss personally

Model

Basic info Product Detail Supplier

Basic info

Brand	ROCKWILL
Model NO.	KYN28 indoor metal-clad withdrawable switchgear
Rated voltage	12kV
Rated frequency	50/60Hz
Series	KYN28

Product Detail

Description ：

The KYN28 indoor metal-clad withdrawable switchgear(hereinafter short as switchgear) is a complete power distribution device for 3.6-24kV,3-phase AC 50Hz,single-bus and single-bus sectionalized system. It is mainly used for power transmission of middle/small generators in power plants; power receiving, transmission for substations in power distribution and power system of factories, mines and enterprises, and starting of large high-voltage motor, etc,so as to control, protect and monitor the system. The switchgear meets IEC298,GB3906-91.In addition to be used with domestic VS1 vacuum circuit breaker, it can also be used with VD4 from ABB,3AH3 from Siemens domestic ZN65A,and VB2 from GE, etc,it truly is a power distribution device with good performance.

Main function introduction:

Centralized (Draw-out) Layout
Armored Compartmentalization
Standardized Modular Design
Excellent performance
Flexible Maintenance

Technology parameters:

Device structure:

Photos of frontal view：

Know your supplier

ROCKWILL

Rockwill Electric Group Global Manufacturer of High voltage and medium-voltage power equipment and smart grid solutions. Headquartered in Wenzhou, China. Serving 100+ countries with quality, innovation, and trust. What We Offer: • HV-MV switchgear (VCB, SF₆ circuit breakers, RMU, GIS) • Distribution transformers and substations • Smart grid and monitoring systems • Solar, wind, EV charging, and energy storage solutions • EPC turnkey power projects Certified: ISO 9001 / ISO 14001 / ISO 45001

Main Categories

High voltage

Business Type

Design/Manufacture/Sales

Highest Annual Export (USD)

$150,000,000

Professional Experience

16 years

Workplace

108000m²m²

占位

占位

Documents

Restricted.

KYN28 indoor metal-clad withdrawable switchgear

Manual English

Consulting

FAQ

Q： What is the IP rating of UniGear ZS1?: A：
UniGear ZS1 has an IP4X rating per IEC 62271-200, protecting against solids ≥1mm (e.g., dust) in indoor environments. Liquid ingress protection isn’t rated; avoid direct water exposure.

Q： What is the heat dissipation of UniGear ZS1?: A：
UniGear ZS1's heat dissipation complies with IEC 62271, achieving ≤65K temperature rise at rated current via optimized airflow and conductive materials (e.g., galvanized steel). Ensures stable operation under full load.

Related Products

Related Knowledges

Analysis of the Principle of Second - harmonic Restraint for Overcurrent Protection of Distribution Automation Switches

Analysis of the Principle of Second - harmonic Restraint for Overcurrent Protection of Distribution Automation Switches

Substance of Second - harmonic Restraint in Overcurrent ProtectionThe substance of second - harmonic restraint in overcurrent protection is to use the second - harmonic component to judge whether the current is a fault current or an excitation inrush current. When the percentage of the second - harmonic component to the fundamental - wave component is greater than a certain value, it is judged to be caused by the excitation inrush current, and the overcurrent protection is blocked.Therefore, the

What are the common faults of low-voltage voltage transformers?

What are the common faults of low-voltage voltage transformers?

Open - Circuit Fault on the Secondary SideOpen - circuit in the secondary side is a typical fault of low - voltage voltage transformers, showing abnormal voltmeter readings (zero/fluctuation), faulty power meters, buzzing noises, and core overheating. When open - circuited, the secondary voltage spikes (no secondary current to balance the primary EMF), causing core saturation, flux distortion, and potential overheating/damage.Causes include loose terminals, poor contact, or human error. In low

What are the typical connection methods for 35kV distribution lines?

What are the typical connection methods for 35kV distribution lines?

Typical Wiring Diagram of 35kV Line Radial π ConnectionWhen a 35kV line adopts a radial power grid structure, a single - side power supply or a double - side power supply radial type can be used according to the situation of the power supply points, and a loop - out interval is reserved at the end of the line.Typical Wiring Diagram of 35kV Line Radial T - ConnectionFor double - radial lines, it is advisable to select a double - side power supply. When the power supply points do not meet the r

Why are the ground fault point and the accident point not at the same location?

Why are the ground fault point and the accident point not at the same location?

Fault Transfer VoltageIn low - voltage distribution systems, there is a type of personal electric shock accident where the accident occurrence point and the system fault point are not at the same location. This kind of accident occurs because after a ground fault happens elsewhere, the generated fault voltage is conducted to the metal casings of other equipment through the PE wire or PEN wire. When the fault voltage on the metal casing of the equipment is higher than the human - body safe voltag

Analysis of Transformer Capacity, Load Rate and Number of Units Selection Issues

Analysis of Transformer Capacity, Load Rate and Number of Units Selection Issues

The safe and economical operation of power transformers is related to the safety, economy, stability, and reliability of the operations of various industries. The limitations of conditions such as the investment economic indicators for its selection, the economic benefits of maintenance and operation, and the adaptability in the new environment (access of distributed power sources, configuration of energy storage, etc.) make it impossible to include comprehensive factors in other aspects.The cap

Analysis of the Impact of Immersion on the Performance of Low-Voltage Current Transformers

Analysis of the Impact of Immersion on the Performance of Low-Voltage Current Transformers

1 IntroductionLow - voltage current transformers for metering, with a through - core type epoxy resin structure, are widely used in distribution transformer areas and for small - to - medium - sized industrial and commercial electricity consumption. As a range expander for electric energy metering, their performance directly relates to electricity consumption safety and the accuracy of users' trade calculations. Studying long - term immersion's impact on these transformers is practically signifi