160-250A DNH40 Series Disconnector Switch
Key attributes
| Brand | Switchgear parts |
| Model NO. | 160-250A DNH40 Series Disconnector Switch |
| Rated voltage | AC 1000V |
| Rated normal current | 250A |
| Rated frequency | 50Hz |
| Series | DNH40 |
Product descriptions from the supplier
The DNH40 series disconnector switch (hereinafter referred to as "the switch") is suitable for industrial power distribution systems with AC 50Hz/60Hz and rated insulation voltage up to 1000V. It is designed for infrequent circuit connection/disconnection and electrical isolation, widely used in construction, power, petroleum, chemical, and automation systems. Suitable for various types of small and medium-sized low-voltage distribution cabinets, including conventional fixed, withdrawable, and outdoor dedicated cabinets. The following are specific adaptation information: GGD low-voltage fixed switchgear, GCK withdrawable low-voltage switchgear, XL-21 power cabinet, JP rural network dedicated comprehensive distribution box, MNS miniaturized withdrawable switchgear, etc
Key Technical Parameters
| DNH40 - 160 | DNH40 - 200 | DNH40 - 250 | ||
|---|---|---|---|---|
| Model | DNH40 - 160 | DNH40 - 200 | DNH40 - 250 | |
| Conventional thermal current and rated operational current | A | 160 | 200 | 250 |
| Rated operational voltage (AC - 20/DC - 20) | V | 1000 | 1000 | 1000 |
| Rated insulation voltage (Installation category Ⅳ) | Ui V | 1000 | 1000 | 1000 |
| Dielectric strength | 50Hz 1min kV | 10 | 10 | 10 |
| Rated impulse withstand voltage | Uimp kV | 12 | 12 | 12 |
| Rated operational current (AC - 21A) | 690V A | 160 | 200 | 250 |
| Rated operational current (AC - 22A) | 690V A | 160 | 200 | 250 |
| Rated operational current (AC - 23A) | 690V A | 160 | 200 | 250 |
| Power loss per pole (at rated operational current) | W | 3.2 | 4 | 6.5 |
| Rated short - time withstand current | ≤690V1s kA | 8 | 8 | 8 |
| Rated short - circuit making capacity | ≤ 690V kA | 30 | 30 | 30 |
| Mechanical life | Oper | 20000 | 20000 | 20000 |
| Operating torque (3 - pole) | Nm | 7 | 7 | 7 |
| Terminal screw specification | mm | M8×25 | M8×25 | M8×25 |
| Terminal tightening torque | Locking torque Nm | 15～22 | 15～22 | 15～22 |
| Normal Operating Conditions | ||||
| Ambient Temperature | Range: - 5℃ to + 40℃, with a 24 - hour average temperature not exceeding + 35℃ | |||
| Humidity | At maximum temperature (+ 40℃), relative humidity ≤ 50%. At lower temperatures (e.g., + 20℃), higher humidity (up to 90%) is permissible. Special measures must be taken to address occasional condensation caused by temperature fluctuations. | |||
| Altitude | ≤2000m | |||
| Pollution Degree | Ⅲ | |||
| Installation Category | Ⅳ | |||
| Installation Requirements | The switch must be installed in a location free from significant vibration, mechanical shock, or exposure to rain/snow. The installation site must be free of explosive hazardous substances and corrosive gases/dust that could damage metal or insulation. | |||
| Note: If the switch is intended for use in ambient temperatures exceeding + 40℃ or below - 5℃, the user must consult the manufacturer. |
Online store
On-time delivery rate
Response time
100.0%
≤4h
Company overview
Workplace: 1000m²
Total staff:
Highest Annual Export(usD): 300000000
Services
Business Type: Sales
Main Categories: Low Voltage Electrical Apparatus/Instrument meters/Tester/High Voltage Electrical Apparatus/Production equipment/Electrical fittings/Equipment Parts
Whole life care manager
Whole-life care management services for equipment procurement, use, maintenance, and after-sales, ensuring safe operation of electrical equipment, continuous control, and worry-free electricity consumption.
The equipment supplier has passed platform qualification certification and technical evaluation, ensuring compliance, professionalism, and reliability from the source.
Related Products
-
315-400A DNH40 Series Disconnector Switch
-
3200-4000A DNH40 series isolator switches
-
2000-2500A DNH40 Series Disconnector Switch
-
630-800A DNH40 Series Disconnector Switch
-
HH15 series Disconnector fuse group and disconnector
-
Disconnector Fuse Group HGLR Series, Fuse Switch Disconnector
-
Isolator Switch DNH8(HGL) Series Load-Disconnector Switch
Related Knowledges
-
Analysis and Remedial Measures for Insulation Failures in Power TransformersThe Most Widely Used Power Transformers: Oil-Immersed and Dry-Type Resin TransformersThe two most widely used power transformers today are oil-immersed transformers and dry-type resin transformers. The insulation system of a power transformer, composed of various insulating materials, is fundamental to its proper operation. A transformer's service life is primarily determined by the lifespan of its insulating materials (oil-paper or resin).In practice, most transformer failures result from damag12/16/2025 -
Case Studies of Installation and Manufacturing Defects in 110kV HV Circuit Breaker Porcelain Insulators1. SF6 gas leakage occurred in the ABB LTB 72 D1 72.5 kV circuit breaker.Inspection revealed gas leakage at the fixed contact and cover plate area. This was caused by improper or careless assembly, where the dual O-rings slipped and were misplaced, resulting in gas leakage over time.2. Manufacturing Defects on the Outer Surface of 110kV Circuit Breaker Porcelain InsulatorsAlthough high-voltage circuit breakers typically have their porcelain insulators protected with covering materials during tra12/16/2025 -
Overview of Defect Diagnosis Methods for High-Voltage AC Circuit Breakers1. What are the characteristic parameters of the coil current waveform in high-voltage circuit breaker operating mechanisms? How to extract these characteristic parameters from the original trip coil current signal?Answer: The characteristic parameters of the coil current waveform in high-voltage circuit breaker operating mechanisms may include the following: Steady-state peak current: The maximum steady-state current value in the electromagnet coil waveform, representing the position where the12/16/2025 -
Intelligent Substation Maintenance Pressure Plate Operation GuideAccording to the "Eighteen Major Anti-Accident Measures for Power Grid of State Grid Corporation of China (Revised Edition)" promulgated in 2018, operation and maintenance units should improve the on-site operation regulations for intelligent substations, refine the usage instructions and abnormal handling methods for various messages, signals, hard pressure plates, and soft pressure plates of intelligent equipment, standardize the operation sequence of pressure plates, strictly follow the seque12/15/2025 -
Classification of Equipment Defects for Relay Protection and Safety Automatic Devices in SubstationsIn daily operations, various equipment defects are inevitably encountered. Whether maintenance personnel, operation and maintenance staff, or specialized management personnel, all must understand the defect classification system and adopt appropriate measures according to different situations.According to Q/GDW 11024-2013 "Operation and Management Guide for Relay Protection and Safety Automatic Devices in Smart Substations," equipment defects are classified into three levels based on severity an12/15/2025 -
Under What Conditions Will the Line Circuit Breaker Auto-Reclosing Signal Be Locked Out?The line circuit breaker auto-reclosing signal will be locked out if any of the following conditions occur:(1) Low SF6 gas pressure in circuit breaker chamber at 0.5MPa(2) Insufficient energy storage in circuit breaker operating mechanism or low oil pressure at 30MPa(3) Busbar protection operation(4) Circuit breaker failure protection operation(5) Line distance protection zone II or zone III operation(6) Short lead protection operation of circuit breaker(7) Presence of remote tripping signal(8)12/15/2025
Haven't found the right supplier yet? Let matching verified suppliers find you.
Get Quotation Now
Send inquiry
Download
Get the IEE Business Application
Use the IEE-Business app to find equipment, obtain solutions, connect with experts, and participate in industry collaboration anytime, anywhere—fully supporting the development of your power projects and business.
