Electrical Engineering Guides

Power Systems

Routh Hurwitz Stability Criterion

After reading the theory of network synthesis , we can easily say that any pole of the system lies on the right hand side of the origin of the s plane, it makes the system unstable. On the basis of this condition A. Hurwitz and E.J.Routh started investigating the necessary and sufficient conditions

By Electrical4u 03/29, 2024
Power Systems

Root Locus Technique in Control System | Root Locus Plot

The root locus technique in control system was first introduced in the year 1948 by Evans. Any physical system is represented by a transfer function in the form of We can find poles and zeros from G(s). The location of poles and zeros are crucial keeping view stability, relative stability, transient

By Electrical4u 03/29, 2024
Power Systems

State Space Analysis of Control System

Before I introduce you about the concept of state space analysis of control system , it is very important to discuss here the differences between the conventional theory of control system and modern theory of control system. The conventional control theory is completely based on the frequency domain

By Electrical4u 03/29, 2024
Power Systems

Transient and Steady State Response in a Control System

When we study the analysis of the transient state and steady state response of control system it is very essential to know a few basic terms and these are described below. Standard Input Signals : These are also known as test input signals. The input signal is very complex in nature, it is complex b

By Electrical4u 03/29, 2024
Power Systems

Bode Plot, Gain Margin and Phase Margin (Plus Diagrams)

What is a Bode Plot? A Bode plot is a graph commonly used in control system engineering to determine the stability of a control system. A Bode plot maps the frequency response of the system through two graphs – the Bode magnitude plot (expressing the magnitude in decibels) and the Bode phase plot (e

By Electrical4u 03/29, 2024
Power Systems

Mathematical Modelling of Control System | Mechanical Electrical

Mathematical Modelling of Control System There are various types of physical systems, namely we have: Mechanical systems Electrical systems Electronic systems Thermal systems Hydraulic systems Chemical systems First off we need to understand – why do we need to model these systems in the first place

By Electrical4u 03/29, 2024
Power Systems

Network Synthesis | Hurwitz Polynomial | Positive Real Functions

Theory of Network Synthesis Network Functions Network synthesis theory involves the synthesis of networks made up of both active components (like resistors) and passive components (like inductors and capacitors). Let’s start with the basics: what is a network function ? In the frequency domain, netw

By Electrical4u 03/29, 2024
Power Systems

Settling Time: What is it? (Formula And How To Find it in MATLAB)

What is Settling Time? The settling time of a dynamic system is defined as the time required for the output to reach and steady within a given tolerance band. It is denoted as T s . Settling time comprises propagation delay and time required to reach the region of its final value. It includes the ti

By Electrical4u 03/29, 2024
Power Systems

PID Controllers and PID Control in Control Systems

PID control stands for proportional–integral–derivative control . PID control is a feedback mechanism used in a control system . This type of control is also termed as three-term control, and is implemented by a PID Controller . By calculating and controlling three parameters – the proportional, int

By Electrical4u 03/29, 2024
Power Systems

Nichols Chart: What is it?

What is a Nichols Chart? A Nichols Chart (also known as a Nichols Plot) is a plot used in signal processing and control system design to determine the stability and closed-loop frequency response of a feedback system. The Nichols chart is named after its founder, Nathaniel B. Nichols. How Does A Nic

By Electrical4u 03/29, 2024
Power Systems

Basic Signal Operations

A signal, comprises of a set of information expressed as a function of any number of independent variables, that can be given as an input to a system, or derived as output from the system, to realize its true practical utility. The signal we derive out of a complex system might not always be in the

By Electrical4u 03/29, 2024
Power Systems

First Order Control System: What is it? (Rise Time, Settling Time & Transfer Function)

What is a First Order Control System? A first order control system is defined as a type of control system whose input-output relationship (also known as a transfer function ) is a first-order differential equation. A first-order differential equation contains a first-order derivative, but no derivat

By Electrical4u 03/29, 2024

Free Expert Guides on Power Systems, Circuit Design & Electrical Troubleshooting

All

Routh Hurwitz Stability Criterion

Root Locus Technique in Control System | Root Locus Plot

State Space Analysis of Control System

Transient and Steady State Response in a Control System

Bode Plot, Gain Margin and Phase Margin (Plus Diagrams)

Mathematical Modelling of Control System | Mechanical Electrical

Network Synthesis | Hurwitz Polynomial | Positive Real Functions

Settling Time: What is it? (Formula And How To Find it in MATLAB)

PID Controllers and PID Control in Control Systems

Nichols Chart: What is it?

Basic Signal Operations

First Order Control System: What is it? (Rise Time, Settling Time & Transfer Function)

Recommended Topics