Electrical Engineering Guides

Power Systems

Industrial Automation: What is it? (Basics & Types)

Due to the rapid advances in technology, all industrial processing systems, factories, machinery, test facilities, etc. turned from mechanization to automation. A mechanization system needs human intervention to operate the manual operated machinery. As new and efficient control technologies evolved

By Electrical4u 03/29, 2024
Power Systems

Signal Flow Graph of Control System

Signal flow graph of control system is further simplification of block diagram of control system . Here, the blocks of transfer function, summing symbols and take off points are eliminated by branches and nodes. The transfer function is referred as transmittance in signal flow graph. Let us take an

By Electrical4u 03/29, 2024
Power Systems

Block Diagram of Control Systems (Transfer Functions, Reduction, Summing Points And How To Read Them)

What is a Block Diagram in a Control System? A block diagram is used to represent a control system in diagram form. In other words, the practical representation of a control system is its block diagram. Each element of the control system is represented with a block and the block is the symbolic repr

By Electrical4u 03/29, 2024
Power Systems

Digital Data of Control System

In the present article we will discuss all about discrete signals which are made up of discrete data or sampled data or also known as digital data of control system . Now before we discuss this topic in detail it is very essential to know, what is the need of a digital technology though we have anal

By Electrical4u 03/29, 2024
Power Systems

Compensation in Control System | Lag lead Compensation

Before I introduce you about various compensation in control system in detail, it is very essential to know the uses of compensating networks in the control system . The important uses of the compensating networks are written below. Necessary of Compensation In order to obtain the desired performanc

By Electrical4u 03/29, 2024
Power Systems

Describing Function: Analysis of Nonlinear Systems

The describing function is an approximate procedure for analyzing certain nonlinear control problems in control engineering . To start, let us first recall the basic definition of a linear control system. Linear control systems are those where the principle of superposition (if the two inputs are ap

By Electrical4u 03/29, 2024
Power Systems

Types of Controllers | Proportional Integral and Derivative Controllers

What is a Controller? In control systems, a controller is a mechanism that seeks to minimize the difference between the actual value of a system (i.e. the process variable) and the desired value of the system (i.e. the setpoint). Controllers are a fundamental part of control engineering and used in

By Electrical4u 03/28, 2024
Power Systems

Types of Control Systems | Linear and Non Linear Control System

A control system is a system of devices that manages, commands, directs or regulates the behavior of other devices to achieve a desired result. In other words, the definition of a control system can be simplified as a system which controls other systems to achieve a desired state. There are various

By Electrical4u 03/28, 2024
Power Systems

Control Systems: What Are They? (Open-Loop & Closed-Loop Control System Examples)

What is a Control System? A control system is defined as a system of devices that manages, commands, directs, or regulates the behavior of other devices or systems to achieve a desired result. A control system achieves this through control loops, which are a process designed to maintain a process va

By Electrical4u 03/28, 2024
Power Systems

On Off Control Controller: What is it? (Working Principle)

What is an On Off Controller? Sometimes, the control element has only two positions either it is fully closed or fully open. This control element does not operate at any intermediate position, i.e. partly open or partly closed position. The control system made for controlling such elements is known

By Electrical4u 03/28, 2024
Power Systems

Field Oriented Control

AC Induction motors offer enviable operational characteristics such as robustness, reliability and ease of control. They are extensively used in various applications ranging from industrial motion control systems to home appliances. However, the use of induction motors at its highest efficiency is a

By electricity-today 03/28, 2024
Power Systems

Control Engineering: What is it? (And its History)

What is Control Engineering Control system engineering is the branch of engineering which deals with the principles of control theory, to design a system which gives yields the desired behavior in a controlled manner. Hence, although control engineering is often taught within electrical engineering

By Electrical4u 03/28, 2024

Free Expert Guides on Power Systems, Circuit Design & Electrical Troubleshooting

All

Industrial Automation: What is it? (Basics & Types)

Signal Flow Graph of Control System

Block Diagram of Control Systems (Transfer Functions, Reduction, Summing Points And How To Read Them)

Digital Data of Control System

Compensation in Control System | Lag lead Compensation

Describing Function: Analysis of Nonlinear Systems

Types of Controllers | Proportional Integral and Derivative Controllers

Types of Control Systems | Linear and Non Linear Control System

Control Systems: What Are They? (Open-Loop & Closed-Loop Control System Examples)

On Off Control Controller: What is it? (Working Principle)

Field Oriented Control

Control Engineering: What is it? (And its History)

Recommended Topics