
Sîstema xweşkêr solaran PV ya taybetandî û taybetandî yek sîstemî û taybetandî ye ku di rûbariyê de bi modulan solaran PV (PV) dixebitîne serhildanîn jorî yên li ser rojanîn. Sîstema xweşkêr solaran PV nayê li gor bingeha elektrîkî yên din û nayê li gor bingeha elektrîkî yên din. Sîstema xweşkêr solaran PV dê dikare serhildanîn jorî yên ji bo çend ênkarên din, wêjî lighting, water pumping, ventilation, communication, û entertainment, di şahan û dergehanên paşîn an off-grid de ku elektrîkîya gridê tune ne û yekemî ne.
Sîstema xweşkêr solaran PV ziman herêmde çar parçeyên sereke:
Modulan solaran PV an arrays ku rojanîn bi direct current (DC) elektrîkîyan biguheztin.
Charge controller an maximum power point tracker (MPPT) voltage û current di nav solaran PV modules de re hatiye bi battery û load.
Battery an battery bank ku serhildanîn jorî yên bi tevahî yên solaran PV modules di rûbariyê de hatiye wergerandin û di demên dibistin an cloudy weather de re bi load hatiye verastkirin.
Inverter ku DC electricity di battery an solaran PV modules de re hatiye bi alternating current (AC) elektrîkîyan di AC loads de re biguheztiyekirin.
Depends on the type and size of the load, a standalone solar PV system can be configured in different ways. In this article, we will discuss four common types of standalone solar PV systems and their advantages and disadvantages.
Ev û sîstema xweşkêr solaran PV yekemî ye, ji ber ku divê du parçeyên sereke: modula solaran PV an array û DC load. Modula solaran PV an array bi DC load direkten giribind, wêjî fan, pump, an light, bêtirbînî device. Ev sîstem tenha di demên rojanîn de kar dide heta ku rojanîn bi tevahî yên din bibe.
Zelal ev sîstemê bi low cost û simple, ji ber ku nayê li gor battery, charge controller, an inverter. Lakin, zedel ev sîstemê bi limited application û performance, ji ber ku nayê dikare serhildanîn jorî yên bi night an low sunlight conditions. Moreover, output voltage û current di modulan solaran PV an array de re bi intensity û angle of sunlight vegerandin, ku dikare operation of the load bêne.
Ev sîstema xweşkêr solaran PV bi electronic control circuit di nav solaran PV module an array û DC load de re zêde kirin. Electronic control circuit bi charge controller an MPPT be. Charge controller voltage û current di nav solaran PV module an array de re prevent overcharging û over-discharging of the battery (if present) û to protect the load from voltage fluctuations. MPPT optimizes the power output di nav solaran PV module an array de re by tracking its maximum power point under different sunlight conditions.
Zelal ev sîstemê bi enhance the utilization û efficiency di nav solaran PV module an array de re û extend its lifespan. Bi improve the performance û reliability di nav load de re by providing stable voltage û current. Lakin, zedel ev sîstemê bi increase the cost û complexity di nav sîstem de re, ji ber ku li gor additional device û wiring. Moreover, ev sîstem still cannot provide power at night or during low sunlight conditions without a battery.
Ev sîstema xweşkêr solaran PV bi battery an battery bank di nav previous one de re zêde kirin to enable power supply at night or during low sunlight conditions. Battery stores the excess electricity generated di nav solaran PV module an array de re di rûbariyê de û supplies it to the load when needed. Electronic control circuit regulates the charging û discharging of the battery û protects it from overcharging û over-discharging.
Zelal ev sîstemê bi provide continuous û reliable power for both day û night applications. It can also handle variable loads û peak demands by using different sizes û types of batteries. Lakin, zedel ev sîstemê bi further increases the cost û complexity di nav sîstem de re, ji ber ku li gor more components û maintenance. Battery also adds weight û volume to the system û has a limited lifespan û efficiency.
Ev sîstema xweşkêr solaran PV bi inverter di nav previous one de re zêde kirin to enable the use of AC loads, wêjî appliances, computers, TVs, û lights, as well as DC loads. Inverter converts the DC electricity di nav battery an solaran PV module an array de re to AC electricity of the desired voltage û frequency. Inverter can be either a stand-alone device or integrated with the charge controller or the MPPT.
Zelal ev sîstemê bi provide both AC û DC power for a wide range of applications û devices. It can also be more efficient û flexible than using separate systems for AC û DC loads. Lakin, zedel ev sîstemê bi further increases the cost û complexity di nav sîstem de re, ji ber ku li gor additional device û wiring. Inverter also adds losses û noise to the system û may need protection from surges û faults.
Sîsteman xweşkêr solaran PV useful û viable options for providing electricity di şahan û dergehanên paşîn an off-grid de ku grid power tune ne û yekemî ne. They can also be used to supplement grid power or to reduce dependence on fossil fuels. Depending on the type û size of the load, different types of standalone solar PV systems can be configured with various components, wêjî solaran PV modules an arrays, charge controllers an MPPTs, batteries, inverters, û AC/DC loads. Each type of system has its own advantages û disadvantages in terms of cost, complexity, performance, reliability, û maintenance.
To design a suitable standalone solar PV system for a specific application, several factors need to be considered, wêjî:
The load characteristics (power, voltage, current, frequency, AC/DC)
The solar resource availability (sunlight hours, intensity, angle)
The system sizing (solar PV module an array size, battery capacity, inverter rating)
The system configuration (series or parallel connection of modules or batteries)
The system protection (fuses, breakers, surge protectors)
The system monitoring (meters, indicators, sensors)
Statement: Respect the original, good articles worth sharing, if there is infringement please contact delete.