WZ15 ultra-thin DC EV charger: 20-60kW. Power-electronic device; no primary switchgear parameters (lightning impulse, short-time withstand, making). Protection via external distribution circuit.
WZ15 ultra‑thin wall‑mount DC charger for 20‑60kW, slim cabinet with charging‑gun holder. Installation site requires good ventilation & 4G signal, with defined quarterly & annual maintenance items. No explicit IEC number in manual, generally complies with IEC 61851‑1, IEC 61851‑23 EV charging standards.
WZ15W Ultra thin Wall-Mounted DC Charger Offering a dual power option of 20kW/30kW, specifically designed for home garages and community parking lots, to meet personal and small commercial scenarios.
WZ15L Ultra thin columnar DC Charger is an efficient and space saving charging device designed for medium to large scenarios, with multiple safety protections and easy installation and operation.
Electric drill, M12 drill bit, M860 expansion bolts, multimeter, Phillips screwdriver, flat‑head screwdriver, M13 wrench. Other auxiliary tools shall be prepared according to actual site conditions.
Check cabinet appearance, cable terminals and charging gun condition; verify firm cable connection and clean cabinet interior; use multimeter to confirm no short‑circuit on AC input A/B/C/N/PE; confirm insulation and grounding compliance.
Quarterly: clean cabinet & base‑plate, inspect terminal blocks, cables, filter screen, replace filter if heavily dusty. Annual: fasten all components, inspect insulation & fastening of terminals and cables, full function test including HMI, charging logic and safety protection.
Login
