15kV 3‑phase mechanical‑electronic drop‑out sectionalizer, 300A continuous current, programmable settings, USB‑configurable with event log, pole‑mounted overhead distribution, IEC/IEEE compliant, for recloser‑coordinated fault isolation.
This OEM comprehensive user manual is developed in accordance with prevailing IEC and IEEE standards for overhead distribution automatic sectionalizing equipment. This full‑featured document integrates complete technical specification tables, detailed working‑principle elaboration, mechanical‑structure introduction as well as appearance and installation dimension drawings.
It covers dual‑option parameter setup: primary PC‑based USB tool configuration and emergency hardware DIP‑switch setting (DIP switch serves only for backup purpose, not for frequent use), step‑by‑step on‑site manual & electrical operation instructions, event record management function explanation, and practical typical feeder coordination application cases for distribution network.
Besides, it clearly defines permissible service environmental limits, complete fault sectionalizing logic, dropout mechanical action mechanism and routine field maintenance precautions. This manual serves for product selection, engineering design, tender technical evaluation, on‑site installation, commissioning and daily operation‑maintenance reference, and supports flexible parameter customisation for diversified project requirements.
Please contact us to obtain official compliance certificates, test reports and supplementary installation‑assistance documents.
38kV drop‑out sectionalizer for overhead distribution lines. Self‑powered, programmable count & reset, isolate permanent faults, improve power supply reliability.
The RDK-15/300 is a self-powered 15 kV, 300 A mechanical electronic sectionalizer. Programmable pickup 16–480 A and counts 1–4 let it isolate only faulted feeder segments in coordination with recloser
Installation guides, dimension drawings, test reports and configuration‑tool software are available upon request. Please contact us to receive the full document package.
USB software configuration is the primary method; DIP‑switch setting is only reserved for emergency backup. Parameter modification, event‑log reading and exporting can be realized by PC‑side configuration tool. Please contact us for configuration‑tool installation package.
The product complies with prevailing IEC and IEEE standards for overhead‑line sectionalizing equipment, widely accepted by global power utilities and EPC contractors for distribution‑network projects. Contact us for complete compliance‑certificate documents.
It is deployed on overhead feeders and works together with upstream reclosers or circuit breakers. It automatically isolates permanent‑fault line segments to reduce distribution‑network outage range. Please contact us for coordination‑scheme suggestions.
This manual contains full‑set technical specifications, working principle, installation dimensions, configuration software steps, operation procedures and typical coordination application cases. It serves for engineering design, tender evaluation and field commissioning reference. Please contact us for further technical support.
Login
