
Pangunahing Layunin: Pagpapahusay ng Katumpakan at Pagsisiguro ng Insulasyon
Mga Sitwasyong Applicable: Mga planta ng kuryente sa baybayin, mga planta ng kimika, masamang kapaligiran na may mataas na humidity at polusyon
I. Analisis ng Teknikal na Mga Sakit sa Ulo
Ang tradisyonal na AIS-VT ay nakakaranas ng dalawang pangunahing isyu sa komplikadong kapaligiran:
- Paglipat ng Katumpakan:
- Variasyon ng dielectric constant dahil sa pagbabago ng humidity at pag-accumulate ng contaminant, nagdudulot ng error sa output ng secondary-side na lumalampas sa limit (>Class 0.5).
- Panganib ng Pagkabigo ng Insulasyon:
- Surface flashover na dulot ng salt mist/chemical pollutants, nangangailangan ng pagbaba ng breakdown voltage ng >30%.
II. Mapanuring Teknikal na Solusyon
- Upgrade ng Insulasyon System: Nano-Composite Silicone Rubber Bushings
- Mga Katangian ng Materyales:
- Lifespan ng hydrophobicity ≥25 taon (IEC 62073 accelerated aging verified), nagpapahina ng moisture penetration.
- Pollution flashover withstand voltage ↑40% (≥145 kV/m under salt fog test).
- Optimisasyon ng Struktura:
- Angled shed design + multi-level creepage extension, nagpapataas ng self-cleaning efficiency by 50%.
- Dynamic Precision Compensation System
- Temperature/Humidity Sensors: Embedded high-precision sensors (±0.5% RH/±0.1℃) para sa real-time environmental monitoring.
- AI Compensation Algorithm: Nagpapanatili ng stable 0.1-class accuracy (IEC 60044-2024 Class 0.1) sa lahat ng operating conditions.
- Anti-Ferroresonance Magnetic Circuit Design
- RFC Damping Circuit: Parallel nonlinear resistors (10kΩ~1MΩ adaptive adjustment) nagpapahina ng resonant overvoltage.
- Zero-Sequence Flux Cancellation: Symmetric dual-magnetic circuit structure nagpapababa ng harmonic distortion to <0.2%.
III. Pagpapatunay ng Performance (IEC Standard Tests)
|
Test Item
|
Traditional Solution
|
This Solution
|
Improvement
|
|
Power Frequency Withstand
|
95 kV (dry)/70 kV (wet)
|
130 kV (dry)/115 kV (wet)
|
+37%
|
|
Pollution Flashover (E5 class)
|
28 kV
|
40 kV
|
+43%
|
|
Annual Failure Rate
|
>1.5%
|
0.2%
|
↓87%
|
|
Temp. Cycling Error
|
±0.5%
|
±0.1%
|
5× mas mataas na katumpakan
|
IV. Buod ng Teknikal na mga Advantages
- Resilience sa Extreme Condition:
- Sertipikado para sa C5-M corrosion resistance (ISO 12944), nakakatitiis ng pH=2~12 chemical environments.
- Optimization ng Lifecycle Cost:
- Maintenance cycle extended to 10 years; O&M costs reduced by 60%.
- Smart Expansion Capability:
- Sumusuporta sa IEC 61850 communication interface para sa real-time data upload sa smart grids.
V. Mga Kaso ng Application
- Coastal Wind Farm (average humidity 85%):
- Matapos ang pagpalit ng 32 traditional AIS-VTs: zero annual flashover faults; metering error stabilized at Class 0.1.
- Chlor-Alkali Chemical Plant (chlorine corrosion):
- Zero insulation degradation after 18 months; bushing hydrophobicity maintained HA-grade (highest class).
Compliance Standards: IEC 60044-2024 / IEEE C57.13 / GB/T 20840.7-202X