• Three-phase 10kW Small Diesel Generator Sets
  • Three-phase 10kW Small Diesel Generator Sets
  • Three-phase 10kW Small Diesel Generator Sets
  • Three-phase 10kW Small Diesel Generator Sets
Three-phase 10kW Small Diesel Generator Sets
discuss personally
Model
DMD12000LE/3
Basic info
Brand Wone
Model NO. Three-phase 10kW Small Diesel Generator Sets
Phases Single-phase
Engine Max Output Power 16/3600 kW/rpm
Generator Rated Power 10kW
Generator Rated Voltage 400/230V
Generator Capacity 40L
Series Small diesel generator set
Product Detail

Description:

  • Large muffler, dynamic balance shaft, special design of low-noise unit, shell and frame with shock absorption function.

  • Large capacity fuel tank to ensure long-term work.

  • Non-fuse circuit breaker provides overload protection, capacitive voltage regulator to ensure stable voltage output.

  • Durable four-wheel dragging base structure, easy to move.

Parameter:

image.png

Feature:

The two - cylinder air - cooled engine - compact structure

  • It is a four - stroke, direct - injection, air - cooled engine with a well - designed transmission mechanism. It features light weight, small volume, and low failure rate. The high - precision fuel injection pump enables full combustion of fuel and greater fuel efficiency.

企业微信截图_17343149434085.png

Humanized brake universal wheels - convenient for movement

  • When using the brake universal foot wheels, they can be temporarily fixed, and they can be switched to the rotation mode at any time when pushed. Its structure allows for a horizontal 360 - degree rotation. It rotates flexibly, making it convenient for outdoor construction movement. The wheel material is made of nylon, which is wear - resistant and has a long service life.

企业微信截图_17343151503802.png

High - strength open - frame structure - convenient for maintenance

  • It uses high - quality metal pipes and American - style design. The cross - frame is integrally welded, with a high safety factor and good heat dissipation performance.

  • It is convenient for maintenance and suitable for various engineering construction applications.

OTC automatic welding

  • The frame is more solid, the joints are less likely to break, and it is safer and more reassuring.

企业微信截图_17343152931359.png

The all - copper - wire - wound damping motor has high reliability

  • The damping motor has good waveform, small distortion, strong overload capacity, and high reliability. It is equipped with an AVR automatic voltage regulator to stabilize the generator's output voltage and automatically change the excitation current size.

企业微信截图_17343154107109.png

Multifunctional digital display voltmeter - one - key display

  • The generator's voltage, frequency, and usage duration are displayed with one key, allowing you to grasp the usage status of the generator at any time.

  • It is equipped with over - current and over - load protection devices, which can independently protect the generator.

企业微信截图_17343154998737.png



Know your supplier
Wone
Main Categories
High voltage/Low voltage/Wire cable/Instrument meters/New energy/Tester/Production equipment/Generator/Electrical fittings/Integrated Electrical Equipment
Business Type
Design/Manufacture/Sales
Highest Annual Export (USD)
$50,000,000
Professional Experience
1 years
Workplace
65666m²m²
占位
占位
Related Products
Related Knowledges
What are the typical connection methods for 35kV distribution lines?
What are the typical connection methods for 35kV distribution lines?
Typical Wiring Diagram of 35kV Line Radial π ConnectionWhen a 35kV line adopts a radial power grid structure, a single - side power supply or a double - side power supply radial type can be used according to the situation of the power supply points, and a loop - out interval is reserved at the end of the line.Typical Wiring Diagram of 35kV Line Radial T - ConnectionFor double - radial lines, it is advisable to select a double - side power supply. When the power supply points do not meet the r
Leon
07/18/2025
Why are the ground fault point and the accident point not at the same location?
Why are the ground fault point and the accident point not at the same location?
Fault Transfer VoltageIn low - voltage distribution systems, there is a type of personal electric shock accident where the accident occurrence point and the system fault point are not at the same location. This kind of accident occurs because after a ground fault happens elsewhere, the generated fault voltage is conducted to the metal casings of other equipment through the PE wire or PEN wire. When the fault voltage on the metal casing of the equipment is higher than the human - body safe voltag
Leon
07/18/2025
Analysis of Transformer Capacity, Load Rate and Number of Units Selection Issues
Analysis of Transformer Capacity, Load Rate and Number of Units Selection Issues
The safe and economical operation of power transformers is related to the safety, economy, stability, and reliability of the operations of various industries. The limitations of conditions such as the investment economic indicators for its selection, the economic benefits of maintenance and operation, and the adaptability in the new environment (access of distributed power sources, configuration of energy storage, etc.) make it impossible to include comprehensive factors in other aspects.The cap
Leon
07/17/2025
Analysis of the Impact of Immersion on the Performance of Low-Voltage Current Transformers
Analysis of the Impact of Immersion on the Performance of Low-Voltage Current Transformers
1 IntroductionLow - voltage current transformers for metering, with a through - core type epoxy resin structure, are widely used in distribution transformer areas and for small - to - medium - sized industrial and commercial electricity consumption. As a range expander for electric energy metering, their performance directly relates to electricity consumption safety and the accuracy of users' trade calculations. Studying long - term immersion's impact on these transformers is practically signifi
Felix Spark
07/17/2025
What is reactive power measurement?
What is reactive power measurement?
The power which exists in the circuit when the voltage and current are out of phase to each other, such type of power is known as the reactive power. The formula measures the reactive power in the circuitReactive Power Measurement & VarmetersReactive power measurement is critical as it indicates circuit power loss: low reactive power worsens load power factor, increasing system losses. Varmeters (volt-ampere reactive meters) measure reactive power and are categorized by circuit phases:Single
Edwiin
07/17/2025
How to Design and Install a Solar PV System?
How to Design and Install a Solar PV System?
Design and Installation of Solar PV SystemsModern society relies on energy for daily needs like industry, heating, transport, and agriculture, mostly met by non-renewable sources (coal, oil, gas). However, these cause environmental harm, are unevenly distributed, and face price volatility due to limited reserves—driving demand for renewable energy.Solar energy, abundant and capable of meeting global needs, stands out. Standalone PV systems (Fig 1) offer energy independence from utilities.
Edwiin
07/17/2025
×
Inquiry
Download
IEE-Business is dedicated to serving the personnel in the global power industry.
Join IEE-Business, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!