| Muhimmiya | RW Energy |
| Model NO. | 10.24kWH-20.48kWH Stacked Energy Storage System (ESS) |
| Rated Output Power | 5kW |
| Battery Capacity | 20.48kWh |
| Batakali na Nizalci | Class B |
| Siri | SESS |
Stacked ESS

Akwụkwọ ESS (Energy Storage System) na-akpali akwụkwọ batatri nke lithium iron phosphate dị mkpa, edepụta BMS (Battery Management System) nke ọkachamara, ma na-enye ụwa site n'oge, ọnọdụ ọhụrụ, na ihe dị elu. Ha na-enye inverter photovoltaic off-grid nke high-frequency na MPPT controller nke ndịrị, nke enwere ike ịkọwa ụzọ ọhụrụ nke efu na onye ọmụma gụnyere ụzọ ọhụrụ photovoltaic off-grid, ụzọ ọhụrụ, ụzọ ọhụrụ photovoltaic nke ụlọ, na ụzọ ọhụrụ nke industry and commercial.
Ụzọ a na-enye APP nke ha na-enye IOS/Android. O nwere ike ịkọwa ụzọ ọhụrụ nke charging and discharging nke battery pack, monitoring ụbọchị ọhụrụ nke system operation data, na ịkọwa troubleshooting work nke kacha mgbe ọ bụghị ọtụtụ ezi ọnụọgụ nke system operation, nke enwere ike ịkọwa power supply nke efu.
Peculiarity
Custom stacking capacity, integrated installation free.
Battery pack is replaceable, can be adapted to a variety of batteries, for different batteries to achieve different charging and discharging strategies.
Energy scheduling can be regulated, users can change the charge and discharge according to the power consumption policy of different periods in the region; Low logical O&M cost.
Support battery pack voltage, capacity customization, to meet different use environment
Mature technology, long cycle life, high safety performance.
Modular design, high power density, easy maintenance.
Technical parameter


Note:
A-class cell can charge and discharge 6000 times, and the B-class cell can charge and discharge 3000 times, and the default discharge ratio is 0.5C.
Class A cell warranty 60 months, Class B cell warranty 30 months.
Application scenarios
Small apartment / rental home energy storage
Adaptation advantages: The stacked design only occupies 0.3㎡ of floor space (about the size of a bedside table), no installation required, can be directly placed on the balcony; 10.24kWh capacity supports the continuous operation of refrigerator + lighting + router for 3-5 days, with temperature resistance of -30℃~50℃, suitable for most areas in the region, covering "small apartment stacked ESS" and "household energy storage".
Backup power supply for small commercial places
Adaptation advantages: 20.48kWh capacity can support the operation of convenience store freezers + cash registers for 6-8 hours; modular stacking supports expansion to 30.72kWh, replaceable battery packs avoid waiting for charging during power outages, covering "small commercial stacked energy storage" and "convenience store backup ESS".
Outdoor temporary power supply (camping / small-scale construction)
Adaptation advantages: A single module weighs about 25kg and can be manually carried, IP20 dustproof suitable for dry outdoor scenes; 5kW rated output can power electric drills, lighting, portable ovens, replacing fuel generators to achieve noise-free and clean power supply, covering "outdoor temporary energy storage scenarios".
The role of the Battery Management System (BMS).
Real-time monitoring:The BMS monitors parameters such as voltage, current, and temperature of each battery cell in real time through sensors to ensure the health status of each cell.
Equalization management:The equalization circuit (Balancing Circuit) in the BMS is used to adjust the voltage differences between each battery cell. When a cell voltage is detected to be lower than the set value, the equalization circuit will perform voltage compensation in a passive or active way to make the voltages of all cells tend to be consistent.
Equalization strategies.
Passive balancing:Excess charge is dissipated through resistors connected in parallel to the battery cells, thereby making the voltges of each cell tend to be consistent.
The disadvantage is that it can only work during the battery charging process and has a large energy loss.
Active balancing:Using a bidirectional converter or a dedicated equalization chip to transfer charge between battery cells to achieve energy transfer, thereby making the voltages of each cell consistent.
The advantage is that it can be adjusted bidirectionally. It can equalize during charging and discharging, and has low energy loss.