Electrical Engineering Guides

Power Systems

Types and Working of Cooling Tower

Purpose of a cooling tower is to reduce the temperature of circulating hot water to re-use this water again in the boiler . This hot water is coming from the condenser. How Cooling Tower Works? Hot water is coming at the inlet of the tower and pumped up to the header. The header contains nozzles and

By Electrical4u 03/21, 2024
Power Systems

Natural Draught and Chimney

Draught is the pressure difference which causes a flow of air or gases from one point to another point in the boiler system. Draught is required in a boiler system mainly due to two reasons. To supply sufficient air for completing the combustion. To remove flue gases from the system after combustion

By Electrical4u 03/21, 2024
Power Systems

What is a Natural Draft Cooling Tower?

A natural draft cooling tower is a type of heat exchanger that cools water by direct contact with air. It is used in power plants, oil refineries, petrochemical plants, and natural gas plants to remove excess heat from the circulating water system. A natural draft cooling tower relies on the princip

By Electrical4u 03/21, 2024
Power Systems

A Comprehensive Guide to Cooling Tower Terminology

A cooling tower is a device that rejects waste heat to the atmosphere through the cooling of a coolant stream, usually a water stream, to a lower temperature. Cooling towers are widely used in industrial processes that require heat removal, such as power generation, refrigeration, air conditioning,

By Electrical4u 03/21, 2024
Power Systems

Jet Condenser | Low Level High Level Ejector Jet Condenser

There are mainly three types of jet condensers . Low level condenser. High level condenser. Ejector condenser. Low Level Condenser Here condenser chamber is placed at low elevation and overall height of the unit is low enough so that the condenser may be directly placed beneath the steam turbine , p

By Electrical4u 03/21, 2024
Power Systems

Steam Condenser for a Turbine: A Comprehensive Guide

What is a Steam Condenser for a Turbine? A steam condenser for a turbine is a device that converts the low-pressure exhaust steam from a steam turbine into water by using cooling water. The main function of a steam condenser for a turbine is to maintain a low back pressure on the exhaust side of the

By Electrical4u 03/21, 2024
Power Systems

What is a Surface Steam Condenser?

A surface steam condenser is a device that cools and condenses the exhaust steam from a steam turbine in a thermal power plant or other applications that use steam. The main purpose of a surface steam condenser is to increase the efficiency of the turbine by creating a low-pressure environment at th

By Electrical4u 03/21, 2024
Power Systems

Types of Electrostatic Precipitator

The world is slowly but continually moving towards a greener future. There is much excitement among engineers about the prospects of greener technology. However, coal-based power plants are still the primary source of electrical power in many countries. Baring few countries in the world like Norway

By Electrical4u 03/21, 2024
Power Systems

Electrostatic Precipitator Efficiency

Electrostatic precipitators have become the norm now in industries. Due to strict regulation and ever-increasing air pollution, installing one in a thermal power plant or any other power plants where flue gases are released, have become a necessity. But whether electrostatic precipitators perform th

By Electrical4u 03/21, 2024
Power Systems

Components of Electrostatic Precipitator

Electrostatic precipitators are mandatory nowadays in thermal power plants and other power plants where there is a discharge of flue gases. With ever increasing concern about environmental pollution and the need to reduce it, electrostatic precipitators have become a necessity. Electrostatic precipi

By Electrical4u 03/21, 2024
Power Systems

Advantages and Disadvantages of Electrostatic Precipitator

Electrostatic precipitators are ubiquitous nowadays in thermal power plants due to ever-increasing concern about environmental pollution. Electrostatic precipitator uses the high-intensity electric field to ionise the dust particles in the air stream and then the dust particles are collected by oppo

By Electrical4u 03/21, 2024
Power Systems

Electrostatic Precipitator: What is it And How Does it Work?

The flue gases produced due to the combustion of solid pulverized fuel in the furnace contain plenty of dust particles. When a chimney releases these flue gases in the atmosphere without filtering these dust particles, the atmosphere may get polluted. Hence, these dust particles need to be removed f

By Electrical4u 03/21, 2024

Free Expert Guides on Power Systems, Circuit Design & Electrical Troubleshooting

All

Types and Working of Cooling Tower

Natural Draught and Chimney

What is a Natural Draft Cooling Tower?

A Comprehensive Guide to Cooling Tower Terminology

Jet Condenser | Low Level High Level Ejector Jet Condenser

Steam Condenser for a Turbine: A Comprehensive Guide

What is a Surface Steam Condenser?

Types of Electrostatic Precipitator

Electrostatic Precipitator Efficiency

Components of Electrostatic Precipitator

Advantages and Disadvantages of Electrostatic Precipitator

Electrostatic Precipitator: What is it And How Does it Work?

Recommended Topics