Electrical Engineering Guides

Power Systems

Colpitts Oscillator: What is it? (Circuit Diagram & How To Calculate Frequency of colpitts oscillator)

What is a Colpitts Oscillator? A Colpitts Oscillator is a type of LC oscillator . Colpitts oscillators were invented by American engineer Edwin H. Colpitts in 1918. Like other LC oscillators, Colpitts oscillators use a combination of inductors (L) and capacitors (C) to produce an oscillation at a ce

By Electrical4u 03/28, 2024
Power Systems

Hartley Oscillator: What is it? (Frequency And Circuit)

What is a Hartley Oscillator? A Hartley Oscillator (or RF oscillator) is a type of harmonic oscillator . The oscillation frequency for a Hartley Oscillator is determined by an LC oscillator (i.e. a circuit consisting of capacitors and inductors ). Hartley oscillators are typically tuned to produce w

By Electrical4u 03/28, 2024
Power Systems

Oscillators: What Are They? (Definition, Types, & Applications)

What is an Oscillator? An oscillator is a circuit which produces a continuous, repeated, alternating waveform without any input. Oscillators basically convert unidirectional current flow from a DC source into an alternating waveform which is of the desired frequency, as decided by its circuit compon

By Electrical4u 03/28, 2024
Power Systems

Signal Generator: What are They? Circuit & Block Diagram

What is a Signal Generator? Signal generators are electronic devices that generate electronic signals and waveform. These electronic signals are either repeating or non-repeating as per the requirements and field of applications. There are different types of signal generators with different level of

By Electrical4u 03/27, 2024
Power Systems

Tuned Collector Oscillator

Before we go into the topic of tuned collector oscillator , we must first understand what is an oscillator is and what it does. An oscillator is an electronic circuit that generates an oscillating or periodic signal, like a sine wave or a square wave. The main purpose of an oscillator is to convert

By Electrical4u 03/27, 2024
Power Systems

RC Phase Shift Oscillator

RC phase-shift oscillators use resistor-capacitor (RC) network (Figure 1) to provide the phase-shift required by the feedback signal. They have excellent frequency stability and can yield a pure sine wave for a wide range of loads. Ideally a simple RC network is expected to have an output which lead

By Electrical4u 03/27, 2024
Power Systems

Clapp Oscillator: Frequency Formula And Circuit Diagram

What is a Clapp Oscillator? A Clapp oscillator (also known as a Gouriet oscillator) is an LC electronic oscillator that uses a particular combination of an inductor and three capacitors to set the oscillator’s frequency (see circuit diagram below). LC oscillators use a transistor (or vacuum tube or

By Electrical4u 03/27, 2024
Power Systems

Klystron Tube: What is it? (Types And Applications)

What is a Klystron Tube? A Klystron (also known as a Klystron Tube or Klystron Amplifier ) is a vacuum tube that is used to oscillate and amplify microwave frequency signals. It was invented by American electrical engineers Russell and Sigurd Varian. A klystron uses the kinetic energy of an electron

By Electrical4u 03/27, 2024
Power Systems

Quadrature Amplitude Modulation (QAM): What is it?

What is QAM (Quadrature Amplitude Modulation)? QAM (Quadrature Amplitude Modulation) is defined as the modulation technique which is the combination of phase and amplitude modulation of a carrier wave into a single channel. In other words, QAM transmits information by changing both the amplitude and

By Electrical4u 03/27, 2024
Power Systems

Relaxation Oscillator: What is it? (And How Does it Work)

What is a Relaxation Oscillator? A relaxation oscillator is defined as a non-linear electronic oscillator circuit that can generate a non-sinusoidal repetitive output signal. A relaxation oscillator was invented by Henri Abraham and Eugene Bloch using a vacuum tube during World War 1. Oscillators ar

By Electrical4u 03/27, 2024
Power Systems

Frequency Limitation of an Oscilloscope

Oscilloscopes are an incredibly useful tool of the electronics world after a multimeter . Without a scope, it’s quite difficult to know what is happening in a circuit. But this type of test equipment has its own limitation. To overcome this limitation, one must understand the weakest links in the sy

By Electrical4u 03/27, 2024
Power Systems

Measurement of Voltage Current and Frequency by Oscilloscope

Normally, an oscilloscope is an important tool in an electrical field which is used to display the graph of an electrical signal as it varies with respect to time. But some of the scopes have additional features apart from their fundamental use. Many oscilloscopes have the measurement tool that help

By Electrical4u 03/27, 2024

Free Expert Guides on Power Systems, Circuit Design & Electrical Troubleshooting

All

Colpitts Oscillator: What is it? (Circuit Diagram & How To Calculate Frequency of colpitts oscillator)

Hartley Oscillator: What is it? (Frequency And Circuit)

Oscillators: What Are They? (Definition, Types, & Applications)

Signal Generator: What are They? Circuit & Block Diagram

Tuned Collector Oscillator

RC Phase Shift Oscillator

Clapp Oscillator: Frequency Formula And Circuit Diagram

Klystron Tube: What is it? (Types And Applications)

Quadrature Amplitude Modulation (QAM): What is it?

Relaxation Oscillator: What is it? (And How Does it Work)

Frequency Limitation of an Oscilloscope

Measurement of Voltage Current and Frequency by Oscilloscope

Recommended Topics