| Muhimmiya | Schneider |
| Model NO. | Power-Zone Load Center Unit Substations Gwamnatin Kirkiro na IEE-Business |
| Kpọmkwem kwamnyereke | 1000kVA |
| Siri | Power-Zone Model III |
Akaabo na Model III na Power-Zone don substation da take kula zama wata ɗaya, tana da switch mai uku, transformer mai kyau, da kuma I-Line™ section ta gina. Duk abubuwa suna faɗa, suka sayar, da kuma suka ci gaba a kan Schneider Electric. Ana samun wannan substation da UL listing.
Model III yana da 49 inches da shi da ke ƙasa, da 90 inches na tsakiyar. Wannan yana iya ba zama da shi a cikin harsuna da mutane masu siffar da kuma zunguruka masu cuta.
Model III yana iya magance a fagen; ana iya magance transformer taps a karkashin. Don inganta hawa, ya kamata a ƙara ɗaya da yarda 12 inches a karkashin transformer.
Model III package unit substations suna da muhimmanci a cikin sabon binadar da ke bukatar duk abubuwan da ke bukatar, da kuma a cikin sabon birnin da ke bukatar duk abubuwan da ke bukatar da kuma rike mai kadan.
Duk Model IIIs suna da Square D™ brand fused HVL/cc 600 A load interrupter switch. HVL/cc yana da rike mai kadan a kasar da kuma yana da compartmentalized switch mai kusa. Idan an yi switching da overcurrent protection a wani wurare, za a iya bayar full-height air-filled terminal chamber a kafin switch.
Primary Switch Ratings, Type HVL/cc

An amfani da special barrel wound dry-type transformers da take amfani da resin encapsulated VPI (Vacuum Pressure Impregnation) techniques don samun low-loss, compact design da ke bukatar don substation mai kadan. An amfani da Class H, 220 °C insulation duka. Temperature rise yana da 150 °C as standard, idan an iya samun 80°C ko 115 °C low temperature premium transformers through 750 kVA. Aluminum windings yana da standard, da copper as an option. Ana bayar four full capacity 2-1/2 percent taps - two above nominal voltage and two below.
Fan cooling yana da optional. Idan an zabi, yana haɗa da capacity rating of the transformer an additional 33 percent. An amfani da Model 98 digital controller. Wannan system yana ba da precision control through the use of three high accuracy thermocouple type sensors - one in each phase of the windings.
Controller yana da membrane front panel for displaying the temperature of all three phases with individual readings. The hottest phase is automatically displayed. The Model 98 digital controller features simple three-button operation with fan, alarm and trip function settings and is Powerlogic™ compatible.

Distribution Section
I-Line™ Mounted Molded Case Circuit Breakers
Molded case circuit breakers are group mounted in an I-Line panelboard section offering the inherent ease of installation for which the plug-on I-Line circuit breaker has become known. All circuit breakers are quick-make, quick-break, thermal magnetic, permanent trip type and are factory-calibrated and sealed for accurate overcurrent response and maximum short-circuit strength. PowerPact™ P and R circuit breakers are available with solid-state MicroLogic™ trip units. Current limiting high interrupting capacity FI, KI, and LI circuit breakers are also available. Circuit breakers may be safely back-fed for use as main circuit breakers. All circuit breakers are UL listed and carry integrated equipment rating when used exclusively with other Square D™ brand circuit breakers in intended assemblies.
I-Line panel is available in 1200 A. Maximum mounting space is 108 inches.
Tin-plated copper bus is standard.
Substation Dimensions and Approximate Weights
