Mfumo wa Transformer (transformer wa utambuzi)

Maelezo ya bidhaa:

 Mfano wa umbo wa kawaida wa mizizi:

• Inatumika mahali ambapo kuna vumbi za coal na biogas katika mizizi na hakuna hatari ya kupata ufaaji. Inatumika kwa ajili ya mzunguko wa umeme na mwanga.

• Mizizi wa umbo wa kawaida ni imara sana na chini kwa aina. Mifuko yake ni imara sana iweze kusimamia viwango vya presha 0.1 mpa bila kubadilika kwa muda mrefu. Mipango ya juu na chini ya umeme ya kuingiza na kuondoka kwa mizizi yanayotumika na sanduku la muungano lenye majalebi ya insulation.

• Mizizi wa umbo wa kawaida inatumiwa na usimamizi wa bei bila maengine, mtaani wa usimamizi wa bei ni ±5%; Mipango ya pili inapiga hadi 6 vitambaa, ambayo inaweza kutumia Y - connection au Delta - connection.

Mizizi wa mafuta ya mizizi:

• Yanatumika mahali ambapo kuna hatari ya ufaaji katika mizizi. Aina hii ya mizizi zinazotumiwa mara nyingi ni dry type, tabia kuu ya muundo ni kwamba saba ya kila tofauti ya box shell imeundwa kulingana na maagizo ya mafuta, na inaweza kusimamia presha ya ndani 0.8 mpa.

• Uwezo wa mizizi wa dry type wa mizizi ni mara nyingi 4000kVA (4MVA) na 2500kVA (2.5MVA), iliyoundwa kwa ajili ya mzunguko wa drill, mwanga, ishara na umeme wa vifaa vingine. Mipango yake ya kuingiza na kuondoka yanakolekwa kwa njia ya cable kwa kutumia outlet sleeve.

•  Uaminifu mkubwa wa mchakato uliothibitishwa zaidi ya 50 maeneo na mikoa yote duniani.

• Bidhaa yetu zinazotengenezwa zinazotumika zaidi ni Iran, Kazakhstan, Uzbekistan, Kazakhstan, Pakistan, Indonesia, Chile na maeneo mengine.

Technolojia inayohudumu:

•  Uwezo mkubwa, hasara kidogo, sauti chache (< 65dB) zaidi ya kuzuia matumizi ya umeme

•  Tarehe nzuri, utaratibu wa ukurasa ni zaidi ya GB na IEC standards

•  Bidhaa ina nguvu ya overload na over-voltage, na inaweza kukabiliana kwa muda mrefu kwa kiwango cha rated load

•  Nguvu ya kupigana na impact na short circuit

•  Na kitufe cha protection ya computer (measurement, control, protection, communication, etc.)

The shell:

• Machinery ya Mitsubishi laser cutting na CNC punching, reducing, folding na vifaa vingine vinaweza kuhakikisha upatikanaji wa upatikanaji.

• Roboti ya ABB automatic welding, laser detection, ili kuevita leakage, daraja la ubora ni 99.99998%.

• Electrostatic spray treatment, miaka 30 ya paint (coating corrosion resistance within 100h, hardness ≥0.4).

• Tumia tubing ya heat dissipation (double row and three row tubing adopt insert mode) ili kupata mazao mazuri ya heat dissipation.

• Muundo wa fully sealed, maintenance-free na maintenance-free, muda wa kazi wa kawaida ni zaidi ya miaka 30.

The iron core:

• Vitambaa ni high quality cold rolled grain oriented silicon steel sheet na mineral oxide insulation (from Baowu Steel Group, China).

• Minimize loss level, no-load current na sauti kwa kuchukua na kuleta process ya silicon steel sheet.

• The iron core ni specially reinforced ili kuhakikisha structura ya transformer ni imara wakati wa kazi ya kawaida na transportation.

winding:

• Low voltage winding inatumiwa na high quality copper foil, excellent insulation resistance.

• The high voltage windings zinatumiwa kwa wingi na insulated copper wire, using the patented technology of Hengfengyou Electric.

• Very good resistance to radial stress caused by short circuit.

High quality material:

• Baowu Steel Group production of silicon steel sheet.

• China produces high quality anaerobic copper.

• CNPC (Kunlun Petroleum) High quality transformer oil (25#).

Maelekezo ya Ordering

• Maelezo makuu ya transformer (voltage, capacity, loss na maelezo makuu mengine).

• Mazingira ya kazi ya transformer (altitude, temperature, humidity, location, etc.).

• Maagizo mengine ya customization.

• Muda wa kawaida wa delivery ni siku 30.

• Haraka delivery duniani kote.

Nini ni msingi wa safety precautions unayoweza kujitunza wakati wa kutumia mizizi wa mizizi chini?

Explosion-proof Safety：

Shell Inspection：

• For flameproof mining transformers, it is necessary to regularly inspect the integrity of the flameproof shell. The flameproof joint surfaces should remain smooth and free from damage, and the flameproof clearance must meet the specified standards. For example, the flameproof clearance is generally required to be within a specified range, such as around 0.1 - 0.2 mm. Any clearance exceeding the standard may lead to the failure of the explosion-proof performance.

• The bolts and other connecting parts on the shell should be complete and tightened to prevent loosening during the operation due to vibration or other reasons, which may affect the flameproof effect.

Preventing Internal Faults from Causing Explosions：

It is essential to ensure that the quality and installation of the electrical components inside the transformer meet the requirements to prevent faults such as short circuits and overloads from generating electric sparks or high temperatures. For example, the insulation of the windings should be in good condition to avoid inter-turn short circuits. Meanwhile, appropriate overload protection and short-circuit protection devices should be installed so that when overload or short-circuit situations occur, the power supply can be cut off in a timely manner to prevent the generation of energy sufficient to cause explosions inside the transformer.

Electrical Safety：

Grounding Safety：

• Mining transformers must have reliable grounding. The grounding resistance should meet the specified requirements, and generally, the grounding resistance is required to be no greater than 2Ω. Good grounding can lead the current into the earth when leakage or other faults occur in the transformer, thus avoiding electric shocks to personnel.

• The grounding devices should be regularly inspected to ensure that the grounding connections are firm and that the grounding electrodes are free from corrosion and other damage. For example, if the grounding electrodes are in a damp underground environment for a long time, they are prone to rust and corrosion, which will reduce the grounding performance and need to be replaced in a timely manner.

Preventing Electric Shocks：

• The high-voltage and low-voltage terminals of the transformer should be enclosed or protected to prevent accidental contact by personnel. During maintenance and other operations, the power supply must be cut off first, and a warning sign saying "Someone is working, Do not switch on" should be hung.

• Underground operators should be equipped with personal protective equipment such as insulating gloves and insulating boots, and they should receive relevant electrical safety training to be familiar with the operation and safety precautions of the transformer.