Córas Fornais Wind-Solar Chomhshoileach Ghearrleathan

Is é an córas ilghuairne-soláthar huileach níos déanaí d'fhuinnimh beaga mar shamhlacha cosaint líonra, solas sráide, stáisiúin bheag, agus stáisiúin pumpeoireachta. Le "corp níos déanaí + soláthar fuinnimh shínimhithe" mar a bhearn, meastar freisin na feidhmchláir shóisialta ina chuid den chóras, ag tabhairt soláthar 220VAC stiúrtha do fhuinnimh beaga i gcéadáin nach bhfuil líonra fuinnimh iontu nó ina gceantar aitheanta, agus is gnách é do fhadhbhaíocht fhad leathana de thaiscéalaí fhuinnimh beaga.

Buntáistí Bonn: Díriú ar Bhrúiteanna Fhuinnimh Beaga

Go mór níos déanaí: Is éasca é a úsáid ag duine amháin, gan locht a bheith air

Tá an comhcheilg (an aonad ghineadh gaoithe, an modúl soláthar), forbruithe go struchtúr níos déanaí, le méid bheag agus míleata. Ní mianach tionscal tromchúiseach atá ann, agus is féidir le duine amháin a chur i bhfeidhm agus a chur i bhfeidhm an chuid is mó den chóras. Is maith le spásanna ciorclaí, bun sraithe, agus oirthear stáisiún, ag stopail na brúiteanna traidisiúnta gineadh fuinnimh "trom, mór, agus deacair a chur i bhfeidhm". Is féidir é a sheoladh go héasca fiú i gcéadáin ionsaitheacha.

1. Zero Installation Threshold: Modular, no debugging required, fast installation within half an hour

• Pre-matched modules: The wind power generation unit, photovoltaic module, wind-solar hybrid controller, and inverter have all been pre-calibrated in parameters, ready for installation upon opening the box, without the need for complex on-site debugging;

• No foundation design: The wind unit base is equipped with simple fastening parts, and the photovoltaic module is paired with a snap-on small bracket. Only a simple installation base needs to be poured, and it can be fixed by relying on existing accessories (such as photovoltaic panel installation brackets, guy wires), with the fastest assembly time for a single system being half an hour;

• Clear wiring instructions: The controller and inverter are clearly marked with "wind power input, photovoltaic input, load output, DC input, AC output" interfaces, and come with illustrated instructions, allowing non-professionals to accurately connect the wires and saving the cost of a construction team.

2. Pure Sine Wave Power Supply: Stable and reliable, extending equipment lifespan

• Pure sine wave output: The inverter uses pure sine wave technology, providing a stable single-phase 220VAC voltage and 50/60Hz standard frequency, with a smooth waveform free of noise. It is suitable for precision instruments such as surveillance cameras and base station signal equipment, avoiding equipment overheating, malfunctions, or shortened lifespan caused by non-sine waves;

• High efficiency and low consumption: The overall system efficiency is ≥82%, with low power conversion loss. The wind-solar hybrid controller intelligently allocates wind and solar energy, with photovoltaic power generation during the day and wind power supplementation at night or during windy periods, avoiding single energy supply interruption;

• Wide load compatibility: The rated load covers 300W-600W, with a maximum load of 320W-650W, capable of meeting the needs of conventional equipment such as street lamps and water pumps, as well as supporting the basic operation of small base stations, without worrying about "insufficient power".

3. Ultra-Compact Design: Compact structure, 1㎡ is sufficient

The system adopts a "component proximity combination" compact structure. The wind power generation unit can be fixed on the top of the pole, and the photovoltaic module can be attached to the pole or beside the base. The single system occupies less than 1㎡ of space, without occupying additional land. Whether it is the spacing of street lamps in the suburbs, monitoring points in mountainous areas, or corners of pumping stations in the fields, it can be installed "wherever there is a gap", solving the problem of "insufficient space for equipment installation" in small-scale scenarios.

4. Dual-source complementarity and backup: The system can be optionally equipped with 1-2 lead-acid batteries, effectively avoiding the problem of no power generation in general situations and providing uninterrupted power for the equipment.

Precise Application Scenarios: Covering Four Core Demands for Small Power

1. Power Supply for Network Security Monitoring

   For monitoring points in mountainous areas, suburbs, and forest areas without access to the power grid, the system does not need to be connected to the municipal power grid. It provides 24-hour power supply for surveillance cameras, with pure sine wave output ensuring clear camera images and stable video recording. This solves the problem of "power failure in monitoring", leaving no blind spots in security.

2. Power Supply for Street Lights

   Suitable for street light scenarios in suburban areas, rural roads, and scenic area paths, the system is integrated with street lights for installation. It uses wind and solar energy to store electricity during the day and automatically supplies power to street lights at night. This eliminates the need for municipal wiring and, with pure sine wave output, extends the lifespan of street lights, making it energy-efficient and worry-free.

3. Power Supply for Small Base Stations

   It provides power support for small communication base stations in remote mountainous and pastoral areas. Stable output meets the needs of signal transmission and equipment operation of base stations, avoiding base station outages due to lack of power grid coverage and ensuring smooth communication in remote areas.

4. Power Generation for Small Pumping Stations

   Suitable for irrigation by farmers and water pumping in small reservoirs, it provides continuous power for 300W-600W small power pumps without relying on the power grid. This solves the problem of "lack of electricity for water pumping in the fields", facilitating efficient agricultural production, especially suitable for use in remote farmlands.

System configuration