• Product
  • Suppliers
  • Manufacturers
  • Solutions
  • Free tools
  • Knowledges
  • Experts
  • Communities
Search


Intelligent Vacuum Sectionalizer for Fault Isolation-12kV

  • Intelligent Vacuum Sectionalizer for Fault Isolation-12kV

Key attributes

Brand ROCKWILL
Model NO. Intelligent Vacuum Sectionalizer for Fault Isolation-12kV
Rated voltage 12kV
Rated frequency 50/60Hz
Series FZW32
Description

Rockwill voltage-time type intelligent sectionalizer complete set, based on FZW32 vacuum load break switch platform, designed for 12kV distribution feeder automation. Cooperates with substation outlet breakers or intelligent reclosers to perform fault handling using voltage-time logic, identifying short-circuit and ground fault types, isolating fault sections, and restoring power to non-fault sections. Supports 3G, GPRS, CDMA, GSM, and fiber communication for real-time remote monitoring and control.

Product Advantages

  • Voltage-time fault detection logic – proven cooperative scheme with substation breakers and reclosers
  • Automatic fault isolation – identifies short-circuit and ground faults without communication dependency
  • Non-fault section restoration – automatically restores power to healthy line segments
  • Multiple communication options – 3G, GPRS, CDMA, GSM SMS, optical fiber
  • Real-time remote monitoring – status and fault information to background SCADA system
  • FZW32 vacuum load break switch – reliable load switching and visible isolation
  • Complete set solution – pre-integrated switch, controller, and communication modules

Equipment Parameters

1 Rated voltage kV 12
2 Rated current A 630
3 Rated frequency Hz 50/60
4 Rated short-time withstand current kA 20
5 Rated short-circuit duration s 1
6 Rated short-circuit making current (peak) kA 50
7 1min power frequency withstand voltage kV 42/48
8 Lightning impulse withstand voltage kV 75/85

Sectionalizer Intelligent Controller Parameters

1 Rated supply voltage V AC 220V±20%
2 Rated power consumption (operating) VA 500
3 Standby power consumption W 10
4 Voltage transformer ratio kV 10/0.22
5 Zero-sequence voltage detection V ≤120
6 Voltage-time wait time setting ms 120–180
7 Controller power frequency withstand kV 2
8 Operating temperature range ℃ −40 to +70

Fault handling methods

Fault nature

Fault handling methods

Breakdown

l Fault occurrence: CB or FB protection trips, automatic and rapid opening after loss of pressure on both sides of the segment.

l Fault timing: CB or FB coincide, and the segmenter has a pressure delay time closing.

l Fault isolation: detect line loss of pressure, CB or FB trip, segmenter automatically open and lock and close

l Restore power transmission: CB or FB secondary coincide, and the non-fault section of the feeder restores power.

Instantaneous failures

l Fault occurrence: CB or FB protection trips, automatic and rapid opening after loss of pressure on both sides of the segment.

l Resume power transmission: CB or FB coincide, the fault disappears, and the segmenter closes when there is a calender at one time, and the power transmission is resumed.

Environmental Conditions

  • Outdoor ambient temperature: −25°C ~ +40°C
  • 24-hour average temperature: ≤35°C
  • Altitude: ≤1000 m
  • Daily average relative humidity: ≤95%
  • Monthly average relative humidity: ≤90%
  • Daily average water vapor pressure: ≤2.2 kPa
  • Monthly average water vapor pressure: ≤1.8 kPa
  • Solar radiation intensity: ≤1000 W/m²
  • Minimum pollution class: Class II
  • Installation type: Outdoor pole-mounted installation

Documentation Resource Library Intelligent Sectionalizer

Restricted
RSP specification for mv smart line sectionalizer RSP specification for mv smart line sectionalizer
Others
English
PDF
Public.
Rockwill Electric Group Profile Rockwill Electric Group Profile
Brochure
English
Restricted
RDK Series Autolink Electronic Sectionaliser RDK Series Autolink Electronic Sectionaliser
Catalogue
English
PDF
Restricted
RDK Three-Phase Electronic Auto Sectionalizer RDK Three-Phase Electronic Auto Sectionalizer
Catalogue
English
PDF

Frequently asked questions

Multiple communication options are available including 3G, GPRS, CDMA, GSM SMS and optical‑fiber. It uploads equipment status and fault information to background SCADA system for real‑time remote monitoring & control.

It cooperates with substation outlet breaker or intelligent recloser for 12 kV overhead‑feeder automation, realizing fault section isolation and power restoration of healthy sections.

This complete‑set product offers a 10‑year warranty

Know your supplier

Online store
On-time delivery rate
Response time
100.0%
≤4h
Company overview
Workplace: 108000m² Total staff: 700+ Highest Annual Export(usD): 150000000
Services
Business Type: Design/Manufacture/Sales
Main Categories: Medium and High Voltage Switchgear/Power and Distribution Transformers/Instrument Transformers and Sensors/Lightning Protection and Electrical Insulation/Substations and E-Houses/Electrical Panel and Controlgear
Send inquiry
+86
Click to upload file
Download
Get the IEE Business Application
Use the IEE-Business app to find equipment, obtain solutions, connect with experts, and participate in industry collaboration anytime, anywhere—fully supporting the development of your power projects and business.
Login
or continue with
New here?
Register